Samsung HP-R4252 Plasma Television User Manual

91 91
Setting up Your TV (Plug and Play)
Our adoption of the new VESAPlug and Play solution eliminates complicated and time consuming
setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup
hassles and confusion. Your PC system can easily identify and configure itself for use with your TV.
This TV automatically tells the PC system its Extended Display Identification data (EDID) using Display
Data Channel (DDC) protocols.  
BN68-00835A-00(088~097)...

92
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.Right click the mouse on the Windows
Desktop, then click on...

Note
Both screen position and size will vary, depending on the type of PC monitor and its resolution. 
The table below shows all of the display modes that are supported:
•The interlace mode is not supported.
•The TV operates abnormally if a non-standard video format is selected.
•The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
•A “
✔” mark means that this mode can be supported.
Notes
•The PC text quality of HP-R4252 is optimum in XGA mode (1024 x 768@60Hz).
•The...

94
After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned.
Preset: 
•  Press the SOURCE button to select “PC.”
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button. 
2
Press the ▲or ▼button to select “PC”, then press the
ENTER button. 
3
Press the ▲or ▼button to select “Position”, then press
the ENTER button.
4 
Adjust the position of screen by pressing the 
▲/▼/œ/√button.
5 
Press the MENU button to exit.
Changing the...

95
Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√
†More
SetupTV
MoveEnterReturn
Picture Quality Adjustment
Picture Automatic Adjustment 
Preset: 
•Press the SOURCE button to select “PC”.
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “PC”, then press the
ENTER button.
3
Press the ▲or ▼button to select “Auto Adjustment”,
then press the ENTER button.
The message “Auto Adjustment in progress....

Coarse Adjustment
Preset: 
•Press the SOURCE button to select “PC”.
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “PC”, then press the
ENTER button.
3
Press the ENTER button to select “Image Lock”.
4
Press the ENTER button again to select “Coarse”.
Remove picture noise (vertical stripes) on the screen 
by pressing the œ or√button. (If Coarse is not set 
properly, vertical stripes will appear on the screen.)
• Press the ▲or...

Fine Tuning (Fine)
Preset: 
•Press the SOURCE button to select “PC”.
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “PC”, then press the
ENTER button.
3
Press the ENTER button to select “Image Lock”.
4
Press the ▲or ▼button to select “Fine”, then press the
ENTER button.  
Remove picture noise on the screen by pressing the 
œ or√button. (If Fine is not set properly, noise  will 
appear on the screen.)
• Press the ▲or ▼button...

98
Image Reset
Preset: 
•Press the SOURCE button to select “PC”.
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “PC”, then press the
ENTER button.
3
Press the ▲or ▼button to select “Image Reset”, then
press the ENTER button.
The message “Image Reset is completed.” appears on 
the screen.
•  The previously adjusted settings will be reset to the 
factory defaults.
Image Lock√Position√Auto Adjustment
Image Reset
PCTV...

PLASMA DISPLAY PANEL
Time Setting
Setting the Clock .....................................................................100
Setting the On/Off Timer .........................................................102
Setting the Sleep Timer ............................................................103
BN68-00835A-00(098~103)  4/6/05  8:31 PM  Page 99 

Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.  
Also, you can check the time while watching the TV. (Just press the INFO button.)
100
Option 1: Setting the Clock Manually
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “Time”, then press the
ENTER button. Press the ENTER button to select “Clock”.
3
Press the ENTER button to select “Clock Mode”. Press the
▲or ▼button to...