Samsung HP-R4252 Plasma Television User Manual

1 
Press the MENU button. Press the ▲or ▼button to
select “Sound”, then press the ENTER button.
2
Press the ENTER button to select “Mode”.
3
Press the ▲or ▼button to select “Standard”, “Music”,
“Movie”, “Speech”, or “Custom” sound setting, 
then press the ENTER button.
4 
Press the MENU button to exit.
•Choose Standard for the standard factory settings.
•Choose Music when watching music videos or concerts.
•Choose Movie when watching movies.
•Choose Speech when watching a show that is mostly dialog...

72
1 
Press the MENU button. Press the ▲or ▼button to select
“Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “SRS TruSurround XT”,
then press the ENTER button.
3
Press the ▲or ▼button to change the setting (Off, 3D
Mono, or Stereo), then press the ENTER button.
4 
Press the MENU button to exit.
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling,...

73
Choosing a Multi-Channel 
Sound (MTS) track - Digital 
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for
example, simultaneous translations of the program into foreign languages). The availability of these
additional “multitracks” depends upon the program.
1
Press the MENU button. Press the ▲or ▼button to
select “Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “Multi-Track
Options”, then press the ENTER button.
3
Press the ENTER...

1 
Press the MENU button. Press the ▲or ▼button to select
“Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “Multi-Track Options”,
then press the ENTER button.
3
Press the ENTER button to select “Multi-Track Sound”. 
Press the ▲or ▼button to select a setting you want, 
then press the ENTER button.
4 
Press the MENU button to exit.
•Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty 
receiving a stereo signal.
•Choose “Stereo” for channels that...

75
Using the Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary to adjust the
volume every time the channel is changed. “Auto Volume” lets you automatically adjust the volume
of the desired channel by lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
1 
Press the MENU button. Press the ▲or ▼button to select
“Sound”, then press the ENTER button. 
2
Press the ▲or ▼button to select...

1 
Press the MENU button. Press the ▲or ▼button to select
“Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “Digital Output”, then
press the ENTER button. 
Press the ▲or ▼button to select “Dolby Digital” or 
“PCM”, then press the ENTER button.
3
Press the MENU button to exit.
Choosing a Digital Sound Format
Digital sound can be output from the rear panel connector on your TV. The digital sound outputs
are connectors labeled “Optical” and “Coaxial”. After connecting a digital-audio...

77
1 
Press the MENU button. Press the ▲or ▼button to
select “Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “Melody”, then press
the ENTER button. Press the ▲or ▼button to
select “On” or “Off”, then press the ENTER button.
3 
Press the MENU button to exit.
Setting the On/Off Melody
A melody sound can be set to come on when the TV is powered On or Off.
…More
Digital Output  : Dolby Digital
Melody :On
Sound Select : Main
SoundTV
MoveEnterReturn
Mode : Custom√Equalizer√SRS...

Selecting the Internal Mute
Sound output from the TV speakers is muted. 
1 
Press the MENU button. Press the ▲or ▼button to select
“Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “Internal Mute”, then
press the ENTER button.
3
Press the ▲or ▼button to select “On”, then press the
ENTER button.
• Pressing the ▲or ▼button will alternate between 
“On” and “Off”.
4 
Press the MENU button to exit.
Notes
•When Internal Mute is set to “On”, Sound menus except Multi-Track Options and...

PLASMA DISPLAY PANEL
Channel Control
Selecting the Antenna ..................................................................80
Selecting Your Favorite Channels ..................................................81
Labeling the Channels ..................................................................82
Viewing the Channel Lists ..............................................................83
Editing the Channel Lists ..............................................................84
Fine Tuning Analog...

Selecting the Antenna
80
1
Press the MENU button. Press the ▲or ▼button to select
“Channel”, then press the ENTER button.
2
Press the ENTER button to select “Antenna”.
Press the ▲or ▼button to select “Air” or “Cable”, 
then press the ENTER button. 
Notes
•If the antenna is connected to ANT 1 IN 
(CABLE IN), select “CABLE” and if it is 
connected to ANT 2 IN (AIR IN), select “Air”.
•If both ANT 1 IN and ANT 2 IN are connected, 
select the antenna input you want.
If the antenna input is not selected...