Samsung Hp-p5031 Plasma Display Owners Instructions

31
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the PDP (i.e., an antenna or a cable system).
1 
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ENTER button to select “Air/CATV”.
3 
Press the ▲or ▼button to select  “Air”, “STD”,
“HRC” or “IRC”, then press the ENTER button.
• If you are connected to an antenna, leave “Air”...

32
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (Air, STD, HRC 
and IRC). See steps on previous page.
Press the MENU button. Press the 
▲or ▼button to 
select “Channel”, then press the ENTER button. 
2
Press the ▲or ▼button to select “Auto Program”,
then press the ENTER button.
3
Press the ENTER button. 
The PDP will begin memorizing all of the available 
channels. 
After all the available channels are stored, the Auto
pro gram menu reappears. 
Press the ENTER...

33
Adding and Erasing Channels (Manual Method)
First, press the CH  or CH  button or the number buttons
to select the channel you want to add or delete.
1 
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ▲or ▼button to select “Add/Delete”,
then press the ENTER button.
Repeatedly pressing ENTER button will alternate 
between “Add” and “Delete”.
Press the CH  or CH  button to change 
channels you want to add or delete. 
3 
Press the MENU button to...

34
To View Memorized Channels (PIP Mode)
1
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2
Press the ▲or ▼button to select “Scan”, then press
the ENTER button.
Only the memorized channels are chosen. 
3
Press the MENU button to stop.
Air/CATV : Air√
Auto Program√
Add/Delete√
Fine Tune√
LNA : On√
Scan√
Channel TV
MoveEnterReturn
Scan
Return
Air     4
➤ ➤When Channel scan starts, PIP mode will be activated automatically.
The screen will remain in PIP mode...

35
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the PDP changes channels 
in sequence. You will see all the channels that the PDP has memorized.
(The PDP must have memorized at least three channels.) 
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”. The TV will change...

36
Setting Up Your Remote Control
This PDPs remote control can operate almost any VCR, cable box or DVD. After it has been set up
properly, your remote control can operate in four different modes :TV , VCR, Cable, DVD or STB. 
Pressing the corresponding button on the remote control allows you to switch between these modes,
and control whichever piece of equipment you choose.
Note :
●The remote control may not be compatible with all DVD Players, VCRs, Cable boxes.   
●The remote control can only operate...

37
Remote Control Codes
VCR Codes
Cable Box Codes
DVD Codes
BN68-00714A-00_026~67  2004.5.6  11:56 AM  Page 37 

38
Setting the Signal Source
1
Press the MENU button. Press the ENTER button to
select “Input”.
2
Press the ENTER button to select “Source List”.
3 
Press the ▲or ▼button to select signal source, then
press the ENTER button.
4 
Press the MENU button to exit.
Notes
•When you connect equipment to the PDP, you can choose between the following sets of jacks: 
AV1, AV2, S-Video, Component1, Component2, PC or DVI on the PDP’s rear panel.
Viewing an External Signal Source
Use the remote control to switch...

Assigning Names to External input mode
1
Press the MENU button. Press the ENTER button to
select “Input”.
2 
Press the ▲or ▼button to select “Edit Name”, then
press the ENTER button.
3 
Press the ENTER button.
Press the ▲or ▼button to select external device, 
then press the ENTER button. 
• You can select the VCR, DVD, Cable STB, HD 
STB, Satellite STB, AV Receiver, DVD Receiver, 
Game, Camcorder, DVD Combo, DHR or PC.  
• Set other signal sources (AV2, S-Video, 
Component1, Component2, PC or DVI) using...

BN68-00714A-00_026~67  2004.5.6  11:56 AM  Page 40