Samsung HL-S5086W DLP TV User Manual

							English - 61
1
Press the MENU button. 
Press the …or †button to
select “Picture”, then press the
ENTER button.
2
Press the ENTER button to
select “Mode”.
3
Press the ENTER button.  
Press the …or †button to
select the desired picture mode
(Dynamic, Standard, Movie,
Custom), then press the ENTER
button.   
4
Press the …or †button to
select a particular option
(Contrast, Brightness,
Sharpness, Color, or Tint), 
then press the ENTER button.
Press the œor √button to
decrease or increase the value
of a particular item.
Continued...
Customizing the Picture Settings
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,
“Tint”, and “Color Tone” according to personal preference. You can select “Standard” which 
automatically recalls your personalized picture settings.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Mode
Mode : Standard√Contrast 80
Brightness 50
Sharpness 50
Color 50
Tint (G/R)G50 R50
Color Tone :  Cool1√Reset
MoveEnterReturn
Mode
Mode : Dynamic√Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint (G/R)G50 R50
Color Tone :  Cool1√Reset
MoveEnterReturn
Mode
Mode : Standard
Contrast 100
Brightness 45
Sharpness 75
Color
Tint (G/R)G50 R50
Color Tone :  Cool1
Reset
MoveEnterReturn
▲Contrast▼10 0•You can also select these
options (Contrast, Brightness,
Sharpness, Color, or Tint) by
pressing the …or †button.
NOTES
•“Tint” doesn’t operate in HDMI, PC or any Component mode.
•The Tint cannot be adjusted while watching Digital TV.
Dynamic
Standard
Movie
Custom
BP68-00586A-00Eng(060~073)  2/13/06  2:19 PM  Page 61 
						

							Picture Control
English - 62
5
Press the ENTER button to return to
“Mode”.
Press the …or †button to select
“Color Tone”, then press the ENTER
button.
6
Press the …or †button to select a 
particular option(Cool2, Cool1, Normal,
Warm1, or Warm2), then press the
ENTER button.
7To return the factory defaults, select
“Reset” by pressing the …or †button. 
Press the ENTER button. 
Press the EXIT button to exit.
•The previously adjusted settings will
be reset to the factory defaults.
Resetting the Picture Settings to the Factory Defaults
Mode
Mode : Dynamic√Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint (G/R)G50 R50
Color Tone :  Cool1√Reset
MoveEnterReturn
Mode
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint (G/R)G50 R50
Color Tone :  Warm1
Reset
MoveEnterReturn
Mode
Mode : Dynamic√Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint (G/R)G50 R50
Color Tone :  Cool1√Reset
MoveEnterReturn
Cool2
Cool1
Normal
Warm1
Warm2
BP68-00586A-00Eng(060~073)  2/13/06  2:19 PM  Page 62 
						

							English - 63
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
Press the …or †button to
select “Size”, then press the
ENTER button.
2
Press the …or †button to
select the screen format you
want, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method
Press the P.SIZE button on the remote control repeatedly to select one
of the picture size settings.
•“16:9”: Sets the picture to 16:9 wide mode.
•“Zoom1”:  Magnifies the size of the picture on screen. 
•“Zoom2”: Magnifies the size of the picture more than “Zoom1”. 
•“Wide Fit”: Enlarges the aspect ratio of the picture to fit the 
entire screen.
•“4:3”: Sets the picture to 4:3 normal mode. 
NOTES
•You can select only the 16:9 and 4:3 screen sizes in the DTV, Component or HDMI (720p, 1080i) mode.
•For Zoom1 and Zoom2, you can adjust the vertical position by using the 
…or †button after pressing
the P.SIZE button on the remote control.
•When watching a DTV signal (only 720p, 1080i), you can use Wide Fit.
Wide Fit does not support all external devices.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Size
MoveEnterReturn
16:9
Zoom1
Zoom2
Wide Fit
4:3
BP68-00586A-00Eng(060~073)  2/23/06  1:40 PM  Page 63 
						

							Picture Control
English - 64
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction 
feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “Digital NR”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Picture
Mode : Standard
Size : 16:9
Digital NR : On
DNIe : On
My Color Control
Film Mode : Off
MoveEnterReturn
Off
On
BP68-00586A-00Eng(060~073)  2/13/06  2:20 PM  Page 64 
						

							English - 65
Viewing the DNIe Demonstration
This TV includes the DNIe function so as to provide a high visual quality.
If you set DNIe Demo to On, you can view the applied DNIe and normal pictures on the screen  
for demonstration purposes. Using this function, you can view the difference in visual quality.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “DNIe”, then press the
ENTER button.
3
Press the …or †button to
select “Off”, “Demo”, or
“On”, then press the ENTER
button.
Press the EXIT button to exit.
NOTE
•DNIeTM(Digital Natural Image engine)
This feature brings you more a detailed image with 3D noise
reduction and detail, contrast and white enhancement.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Picture
Mode : Standard
Size : 16:9
Digital NR : On
DNIe : Off
My Color Control
Film Mode
MoveEnterReturn
Off
Demo
On
BP68-00586A-00Eng(060~073)  2/13/06  2:20 PM  Page 65 
						

							Picture Control
English - 66
Setting the My Color Control Mode
My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky,
and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”)
without affecting other colors on the screen.
Using the Easy Control Menu
1Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “My Color Control”,
then press the ENTER button.
3
Press the ENTER button to
select “Easy Control”.
Press the œor √button to
select one of the picture 
settings you want.
The original picture (before
adjustment) is shown on the
left side, while the picture
after adjustment is shown 
on the right side, and an
adjustment bar is shown on
the bottom of the screen.
Press the ENTER button to
accept the selected mode.
Press the EXIT button to exit.
•“Blue”: Emphasizes Clear Blues.
•“Green”: Emphasizes Mild Greens.
•“Pink”: Emphasizes Warm Skin Colors.
•“Standard”: Standard Picture.
NOTES
•Changing the settings in the “Detail Control” menu (see next page)
will automatically set the My Color Control mode to “Custom”.
•Pressing the ENTER button on the remote control for 3 seconds
when there is no OSD on the screen will display the My Color
Control menu.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
My Color Control
Easy Control : Custom√Detail Control√
MoveEnterReturn
œ√
Easy Control
MoveReturnEnterStandardCustom
OriginalCustom
BP68-00586A-00Eng(060~073)  2/13/06  2:20 PM  Page 66 
						

							English - 67
Custom Settings
1Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
Press the …or †button to
select “My Color Control”,
then press the ENTER button.
2
Press the …or †button to
select “Detail Control”, then
press the ENTER button.
3
Press the …or †button to
select the desired My Color
Control, then press the
ENTER button.
There are three colors:
“Pink”, “Green” and “Blue”.
Press the œor √button to
adjust the value of the color
selected.
Changing the adjustment
value will refresh the 
adjusted screen.
Resetting the My Color Control Colors to the Factory Defaults
You can return to the factory default settings for My Color Control
colors.
4Press the MENU button to
display the “Detail Control”
menu.
Press the …or †button to
select “Reset”, then press the
ENTER button.
The previously adjusted My
Color Control colors will be
reset to the factory defaults. 
Press the EXIT button to exit.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
My Color Control
Easy Control : Custom√Detail Control√
MoveEnterReturn
Detail Control
Pink 50
Green 50
Blue 50
Reset
MoveEnterReturn
Detail Control
Pink 50
Green 50
Blue 50
Reset
MoveEnterReturn
OriginalAdjusted
Detail Control
MoveReturnAdjust
▲Pink▼50
BP68-00586A-00Eng(060~073)  2/13/06  2:20 PM  Page 67 
						

							Picture Control
English - 68
Using the Color Weakness Enhancement Feature
This feature adjusts the Red, Green or Blue color to enhance the picture according to the user’s 
particular color weakness.
1
Press the MENU button.
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Color Weakness”,
then press the ENTER button.
3
Press the ENTER button to
select “Color Weakness”.
Press the …or †button to
select “On”, then press the
ENTER button.
4
Press the …or †button to
select a color to be adjusted,
then press the ENTER button.
Press the œor √button to
adjust the value of the color
selected.
Press the EXIT button to exit.
0
Color Weakness
AdjustMoveReturn
▲Red▼
Setup
Language : English√Time√Game Mode : Off√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√
MoveEnterReturn
Setup
Color Weakness√PC√Function Help : On√
MoveEnterReturn
Color Weakness
Color WeaknessRed 0
Green
Blue 0
MoveEnterReturn
Color Weakness
Color Weakness: On√Red 0
Green 0
Blue 0
MoveEnterReturn
•You can also select these
options (Red, Green or
Blue) by pressing the …
or †button.
† More
… More
Off
On
BP68-00586A-00Eng(060~073)  2/13/06  2:20 PM  Page 68 
						

							English - 69
Setting the Film Mode
You can automatically sense and process film signals from all sources and adjust the picture for 
optimum quality.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “Film Mode”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to exit.
NOTE
•Film mode is supported in 480i only.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√Film Mode : Off√
MoveEnterReturn
Picture
Mode : Standard
Size : 16:9
Digital NR : On
DNIe : On
My Color Control
Film Mode : Off
MoveEnterReturn
Off
On
BP68-00586A-00Eng(060~073)  2/13/06  2:20 PM  Page 69 
						

							Picture Control
English - 70
Freezing the Picture
Press the STILL button to freeze a moving picture. (Normal sound will
still be heard.) 
To cancel this function, press the STILL button again or press any
button on the remote control.
BP68-00586A-00Eng(060~073)  2/13/06  2:20 PM  Page 70