Samsung HL-S5086W DLP TV User Manual

							English - 101
Viewing Closed Captions (On-Screen Text Messages)
The Digital Captions function operates on digital channels.
1
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
2
Press the …or †button to
select “Caption”, then press
the ENTER button.
3
Press the ENTER button to
select “Caption”.
Press the …or †button to
select “On”, then press the
ENTER button.
4
Press the …or †button to
select “Caption Mode”, then
press the ENTER button.
Press the …or †button to
select submenu (Service 1
~Service 6, CC1~CC4 or
Text1~Text4) you want, then
press the ENTER button.
5
Press the …or †button to
select “Caption Options”,
then press the ENTER button.
continued...
NOTE
•“Caption Options” are
available only when
“Service1~ Service6” can
be selected in “Caption
Mode”.
Digital
Caption
Caption : On
Caption Mode : Default
Caption Options
MoveEnterReturn
Setup
Language : English√Time√Game Mode : Off√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√
MoveEnterReturn
† More
Setup
Language : English√Time√Game Mode : Off√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√
MoveEnterReturn
† More
Caption
Caption : On√Caption Mode : Default√Caption Options√
MoveEnterReturn
Caption
Caption : On
Caption Mode : Default
Caption Options
MoveEnterReturn
Default
Service 1
Service 2 
Service 3Service 4 Service 5 Service 6▼
Off
On
BP68-00586A-00Eng(084~103)  2/16/06  8:19 PM  Page 101 
						

							Special Features
English - 102
6
Press the …or †button to select “Size”,
then press the ENTER button.
Press the …or †button to select one you
want, then press the ENTER button.
Set other listed options below using the
same method as above.
Press the EXIT button to exit.
NOTE
•The availability of captions depends on the program being broadcast.
Alternate method
Press the CAPTION button on the remote
control repeatedly to select “On” or “Off”.
Size
This option consists of “Default”, “Small”, “Standard”, and “Large”.
The default is “Standard”.
Font Style
This option consists of “Default”, “Style0 ~ Style 7”. 
You can change the font you want. The default is “Style 0”.
Foreground Color
This option consists of “Default”, “White”, “Black”, “Red”, “Green”,
“Blue”, “Yellow”, “Magenta”, and “Cyan”. 
You can change the color of the letter. The default is “White”.
Background Color
This option consists of “Default”, “White”, “Black”, “Red”, “Green”,
“Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the 
background color of the caption. The default is “Black”.
Foreground Opacity
This option consists of “Default”, “Transparent”, “Translucent”, 
“Solid”, and “Flashing”. You can change the opacity of the letter.
Background Opacity
This option consists of “Default”, “Transparent”, “Translucent”, 
“Solid”, and “Flashing”. You can change the background opacity of
the caption.
Return to Default
This option sets each of “Size”, “Font Style”, “Foreground Color”,
“Background Color”, “Foreground Opacity”, and “Background
Opacity” Color to its default.
Caption : On
Caption
Size : Default√Font Style : Default√Foreground Color: Default√Background Color: Default√Foreground Opacity: Default√Background Opacity: Default√Return to Default
MoveEnterReturn
BP68-00586A-00Eng(084~103)  2/16/06  8:19 PM  Page 102 
						

							PC Display
BP68-00586A-00Eng(084~103)  2/16/06  8:19 PM  Page 103 
						

							PC Display
English - 104
Using Your TV as a Computer (PC) Display
How to Connect Your PC to the TV
This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be 
different, depending on the model.
Connecting a PC (15p D-SUB) to the TV
1
Connect a PC cable between
the PC Output jack on the 
PC and the RGB input jack 
(PC IN) on the TV.
2
Connect a Audio cable
between the Audio jack on 
the PC and the Audio input 
jack (PC AUDIO IN) on 
the TV.
NOTE
•You cannot connect this TV to a
PC via HDMI/DVI.
15Pin (D-Sub)
Cable
PCAudio Cable TV Rear Panel
12
BP68-00586A-00Eng(104~127)  2/21/06  11:31 AM  Page 104 
						

							English - 105
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Right click the mouse on the Windows Desktop, 
then click on Properties. The Display Dialog-Box 
will be displayed.
continued... 2Click on Settings, then set the Display Mode with
reference to the Display Modes Table. You do not
need to change the Colors settings.
3Click on Advanced. A new settings dialog box
will be displayed.
4Click on the Monitor tab, then set the Screen
Refresh Rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal
Frequency individually if you can do so, instead 
of setting the Screen Refresh Rate.
5Press the OK button, close the window, then 
press the OK button on the Display Registration
Information window. Automatic re-booting may
commence at this moment.
6Shutdown the PC, and connect it to your TV.
*The actual screens on your PC may look 
different, depending on your particular version 
of Windows and the type of your PC.
*When you use your TV as a PC monitor, 
it supports Colors up to 32 bits.
*In this case, the display on the TV may look 
different depending on your particular version 
of Windows or the PC manufacturer.
*When connecting a PC, you must set it to the 
display settings that are supported by the TV. 
Otherwise, the message Out of input range 
will be displayed.
2
3
4
5
BP68-00586A-00Eng(104~127)  2/21/06  11:31 AM  Page 105 
						

							PC Display
English - 106
NOTES
•The PC text quality is optimum in XGA mode (1024 x 768@60Hz).
•Both screen position and size will vary, depending on the type of PC monitor and its resolution. 
The table above shows all of the display modes that are supported:
*The interlace mode is not supported.
*The TV will operate abnormally if a non-standard video format is selected.
•When this TV is used as a PC display, 32-bit color is supported (over 16 million colors).
•Your PC display screen might appear different, depending on the manufacturer (and depending on
your particular version of Windows). Check your PC instruction book for information about connect-
ing your PC to a TV display-monitor.
•Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync 
signal is supported. 
Resolution
640 x 350
720 x 400
640 x 480
800 x 600
1024 x 768
640 x 480
720 x 400
800 x 600
1024 x 768
1920 x 1080i
1280 x 720p
720 x 483pHorizontal Frequency [KHz]
31.47
31.47
31.47
35.00
37.86
37.50
35.16
37.88
48.08
46.87
48.36
56.40
60.02
35.000
43.269
37.927
43.750
57.672
68.677
33.75
45.00
31.47Vertical Frequency [Hz]
70.00
70.00
60.00
66.70
72.80
75.00
56.30
60.30
72.20
75.00
60.00
70.10
75.00
70.000
85.008
85.039
70.000
72.000
84.997
60
60
60Pixel Clock [MHz]
25.175
28.322
25.175
30.24
31.50
31.50
36.00
40.00
50.00
49.50
65.00
75.00
78.75
28.6
36.0
35.5
45.5
78.4
94.5
74.25
74.25
27Sync Polarity (H/V)
+/-
-
/-
-
/+
-/-
-
/-
-
/-
-
+/-
+/+-
+/+
+/+
-/-
-
/-
+/-
-
/+
-/-
+/-
-
/+
-/+
+/+
X
X
X
Mode
VGA
SVGA
XGA
VESA
DTV
Display Modes
BP68-00586A-00Eng(104~127)  2/21/06  11:31 AM  Page 106 
						

							English - 107
Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen.
1Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the ENTER button to
select “Image Lock”, then
press the ENTER button.
5
Press the …or †button to
select “Coarse” or “Fine”,
then press the ENTER button.
6
Press the œor √button to
remove the picture noise.
Press the EXIT button to exit.
NOTE
•This feature may change
the width of the image.
If necessary, adjust the
position to center.•You can also select
these options (Coarse,
or Fine) by pressing the
…or †button.
Image Lock
MoveEnterReturn
Coarse 50
Fine 0
50
Image Lock
AdjustMoveReturn
▲Coarse▼
0
Image Lock
AdjustMoveReturn
▲Fine▼
Setup
Language : English√Time√Game Mode : Off√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√
MoveEnterReturn
Setup
Color Weakness√PC√Function Help : On√
MoveEnterReturn
† More
… More
PC
Image Lock√Position√Auto Adjustment
Image Reset
Resolution       : 1024x768 @75Hz
MoveEnterReturn
BP68-00586A-00Eng(104~127)  2/21/06  11:31 AM  Page 107 
						

							PC Display
English - 108
Changing the Picture Position
After connecting the TV to your PC, adjust the position of picture if it is not well-aligned.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Position”, then press
the ENTER button.
5
Adjust the position of picture
by pressing the …/†/œ/√
button.
Press the EXIT button to exit.Position
Input
Picture
Sound
Channel
Setup
Listings
MoveEnterReturn
▲
▼
▼▼
Setup
Language : English√Time√Game Mode : Off√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√
MoveEnterReturn
Setup
Color Weakness√PC√Function Help : On√
MoveEnterReturn
† More
… More
PC
Image Lock√Position√Auto Adjustment
Image Reset
Resolution       : 1024x768 @75Hz
MoveEnterReturn
BP68-00586A-00Eng(104~127)  2/21/06  11:31 AM  Page 108 
						

							1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Auto Adjustment”,
then press the ENTER button.
The picture quality and
position are automatically
adjusted, and the picture
returns to original view  
a few seconds later.
Press the EXIT button to exit.
English - 109
Adjusting the Picture Quality and Position Automatically
This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and
position are adjusted automatically.
Setup
Language : English√Time√Game Mode : Off√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√
MoveEnterReturn
Setup
Color Weakness√PC√Function Help : On√
MoveEnterReturn
† More
… More
PC
Image Lock√Position√Auto Adjustment
Image Reset
Resolution       : 1024x768 @75Hz
MoveEnterReturn
iAuto Adjustment in Progress
Please Wait.
BP68-00586A-00Eng(104~127)  2/21/06  11:31 AM  Page 109 
						

							PC Display
English - 110
Changing the Picture Size (PC Mode)
You can select the picture size which best corresponds to your viewing requirements.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
Press the …or †button to
select “Size”, then press the
ENTER button.
3
Press the œor √button to
select the screen format you
want, then press the ENTER
button.
Press the EXIT button to exit.
NOTES
•“Wide TV”: Scales the picture to the size of the TV screen,
regardless of the aspect ratio of the input source.
•“Wide PC”: Scales the picture to 92% of the TV screen, 
regardless of the aspect ratio of the input source. The picture 
position (     ,     ) and size (     ) adjustment are available by
pressing the …/†/œ/√button.
•“4:3”: Displays the picture as it is without changing the aspect
ratio of input source.
Alternate method
Press the P.SIZE button on the
remote control repeatedly to
change the picture Size.
Mode : Standard√Size : Wide  PC√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√
Size
MoveEnterReturn
Wide TV
Wide PC
4:3
MoveEnterReturn
Picture
Wide PC…
†
BP68-00586A-00Eng(104~127)  2/21/06  11:31 AM  Page 110