Samsung HL-R5656W Dlp Tv Owners Instructions

Channel Control
BP68-00524A-00(026~047)  6/3/05  3:18 PM  Page 41 

Channel Control
English - 42
Selecting Your Favorite Channels
You can store your favorite channels for each available input source (such as TV and CATV). 
This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on
the remote control.
To Store Your Favorite Channels:
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Favorite Channels”,
then press the ENTER button.
Press the …or †...

English - 43
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below to the channel number.
1
Press the CH  or CH  button to tune to the channel that
will be labeled. 
2
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
Press...

English - 44
Channel Control
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Fine Tune”, then press
the ENTER button.
3
Press the œor √button to
adjust the fine tuning.
4
To store the fine tuning 
setting in the TV’s memory,
press the ENTER button. 
To reset the fine tuning
setting, press the †button to
select...

English - 45
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) 
channels have either perfect reception quality or you will not receive them at all. So, unlike analog 
channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or...

Channel Control
English - 46
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “LNA”, then press the
ENTER button.
3
Press the …or †button to
select “On” or “Off”, then
press the ENTER button.
4
Press the EXIT button to exit.
NOTES
•LNA functions...

Picture Control
BP68-00524A-00(026~047)  6/3/05  3:18 PM  Page 47 

Picture Control
English - 48
Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
Changing the Picture Standard
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the ENTER button
again to select “Mode”.
3
Press the ENTER button.
Press the …or †button to
select the desired picture
mode (Dynamic, Standard,
Movie, Custom), then press
the ENTER button.           
Press the EXIT button to exit.
Alternate...

English - 49
1
Press the MENU button. 
Press the …or †button to
select “Picture”, then press the
ENTER button.
2
Press the ENTER button to
select “Mode”.
3
Press the ENTER button.  
Press the …or †button to
select the desired picture mode
(Dynamic, Standard, Movie,
Custom), then press the ENTER
button.   
4
Press the …or †button to
select a particular option
(Contrast, Brightness,
Sharpness, Color, or Tint), 
then press the ENTER button.
Press the œor √button to
decrease or increase the value
of a...

Picture Control
English - 50
5
Press the ENTER button to return to
“Mode”.
Press the …or †button to select
“Color Tone”, then press the ENTER
button.
6
Press the …or †button to select a 
particular option(Cool2, Cool1, Normal,
Warm1, or Warm2), then press the
ENTER button.
Press the EXIT button to exit.
NOTE
•Color tone is not available in the “Movie” picture mode.
7To return the factory defaults, select
“Reset” by pressing the …or †button. 
Press the ENTER button.
•The previously adjusted settings will...