Samsung HL-R5656W Dlp Tv Owners Instructions

English - 21
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y, PB, PR
1
Connect a set of audio
cables between the 
COMPONENT (1 or 2)
AUDIO (L, R) IN jacks on 
the TV and the AUDIO OUT
jacks on the DVD player.
2
To enable Component video
viewing, connect a set of 
video cables between the 
COMPONENT (1 or 2) 
VIDEO (Y, P
B, PR) IN jacks 
on  the TV and VIDEO 
(Y/P
B/PRor Y/CB/CR) OUT 
jacks on the DVD player.  
Connecting to Audio...

Connecting a DTV Set-Top Box
Connecting to Y, PB, PR
1
Connect a set of audio
cables between the 
COMPONENT (1 or 2) 
AUDIO (L, R) IN jacks on 
the TV and the AUDIO OUT 
jacks on the Set-Top Box.
2
Connect a set of video
cables between the 
COMPONENT (1 or 2) 
VIDEO (Y, P
B, PR) IN jacks 
on the TV and VIDEO 
(Y/P
B/PRor Y/CB/CR) OUT 
jacks on the Set-Top Box.
Connecting to DVI (Digital Visual Interface)
1
Connect a set of audio
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT...

English - 23
Connecting to HDMI (High Definition Multimedia Interface)
1
Connect an HDMI cable
between the HDMI/DVI IN 
jack on the TV and the HDMI
OUT jack on the Set-Top Box.
NOTE
•Make sure the HDMI/DVI
source’s power is on, or you
will be unable to select it in the
TV menu’s source list.
TV Rear Panel
DTV Set-Top Box Incoming
Cable or 
Antenna
BP68-00524A-00(016~025)  6/3/05  3:17 PM  Page 23 

Connecting a Digital Audio System
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner’s manual.
1
If your audio system has an
optical digital audio input,
connect to the “DIGITAL
AUDIO OUT (OPTICAL)” jack
on the TV.
NOTE
•OPTICAL: converts the electric
signal into an optical light
signal, and transmits it through
glass fibers.
See page 67 to set the digital
output format (Dolby...

Operation
BP68-00524A-00(016~025)  6/3/05  3:17 PM  Page 25 

Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Viewing the Menus and On-Screen Displays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu 
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use
the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. 
You can also view the on-screen menu system and make...

English - 27
Selecting a Menu Language
1
Press the MENU button. 
Press the …or †button to
select “Setup”, then press the
ENTER button.
2
Press the ENTER button to
select “Language”.
Press the …or †button to
select “English”, “Español” 
or “Français”, then press the
ENTER button.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√Function Help: Off√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
Setup
Language:...

Operation
English - 28
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable 
channels. After the available channels are memorized, use the CH  and CH  buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits. 
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (manual).
1
Press the MENU...

English - 29
4
Press the …or †button to select the
Antenna connection, then press the
ENTER button.
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to “STD”.
If you want to select another type of 
cable system, press the œbutton and 
use the …or †button to select 
Analog or Digital “STD”, “HRC” or 
“IRC”. Press the ENTER button.
5
Press the √button to select “Start”, then
press the ENTER button to start the auto
program. The TV...

Operation
English - 30
Adding and Erasing Channels
You can add channels that were not memorized (or delete unwanted channels from memory).
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Add/Delete”, then
press the ENTER button.
3
Repeatedly pressing the
ENTER button will alternate
between add channel and
delete channel.
Press the CH  or CH 
button to switch to the
appropriate channel, then
repeat above. 
Press the EXIT...