Samsung HL-R4266W DLP TV User Manual

English - 41
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
1
Press the MENU button. 
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Time”, then press the
ENTER button.
Press the …or †button to
select “Sleep Timer”, then
press the ENTER button.
3
Press the …or †button to
adjust “Minute”.
4
Setting the Timer sets the
Activation to “Yes” 
automatically.
Press the EXIT button to...

English - 42
Operation
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button. 
Press the ENTER button to
select “Input”.
2
Press the ENTER button to
select “Source List”.
Press the …or †button to
select a signal source, then
press the ENTER button.
Alternate method
Press the SOURCE button on the
remote control repeatedly to...

English - 43
Assigning Names to External Input Mode
This feature enables you to name the input source you have connected.
1
Press the MENU button. 
Press the ENTER button to
select “Input”.
2
Press the …or †button to
to select “Edit Name”, then
press the ENTER button.
3
Press the …or †button to
select a signal source to
edit, then press the ENTER
button.
4
Press the …or †button to
select the external device :
VCR, DVD, D-VHS, Cable
STB, HD STB, Satellite STB,
PVR STB, AV Receiver,
DVD Receiver, GAME,...

SAMSUNG
BP68-00496A-00(030~051)  3/3/05  1:07 PM  Page 44 

Channel Control
BP68-00496A-00(030~051)  3/3/05  1:07 PM  Page 45 

Channel Control
English - 46
Selecting Your Favorite Channels
You can store your favorite channels for each available input source (such as TV and CATV). 
This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on
the remote control.
To Store Your Favorite Channels:
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Favorite Channels”,
then press the ENTER button.
Press the …or †...

English - 47
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below to the channel number.
1
Press the CH  or CH  button to tune to the channel that
will be labeled. 
2
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
Press...

English - 48
Channel Control
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Fine Tune”, then press
the ENTER button.
3
Press the œor √button to
adjust the fine tuning.
4
To store the fine tuning 
setting in the TV’s memory,
press the ENTER button. 
To reset the fine tuning
setting, press the †button to
select...

English - 49
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) 
channels have either perfect reception quality or you will not receive them at all. So, unlike analog 
channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or...

Channel Control
English - 50
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “LNA”, then press the
ENTER button.
3
Press the …or †button to
select “On” or “Off”, then
press the ENTER button.
4
Press the EXIT button to exit.
NOTE
•LNA functions...