Samsung HL-R4266W DLP TV User Manual

English - 21
Connecting a VCR
Connecting a VCR to the Video or S-Video/Audio jack
1
Connect the Video/Audio
cables between the VIDEO 
or S-VIDEO/AUDIO input 
jacks on the TV and VIDEO 
or S-VIDEO/AUDIO output 
jacks on the VCR.
2
Connect a coaxial cable
between the Antenna out 
terminal (i.e., “OUT to TV”) 
on the VCR and the ANT 1 
IN (CABLE) on the TV.
3
Connect a video cable
between the S-VIDEO IN 
jack on the TV and the 
S-VIDEO OUT jack on the 
VCR.
NOTES
•For better video, use an 
S-Video cable....

Connecting CableCARD
You must obtain a CableCARD from a local cable service provider.
1
Insert the CableCARD into 
the “CableCARD” slot and
the message “CableCARD
TM
Inserted” is displayed on 
the screen. If the channel 
information does not 
already exist, the message
“Updating Channel List” is
displayed during channel
information configuration. 
2
When channel information
configuration is finished, 
the message “Updating 
Completed” is displayed. 
It indicates that the channel 
list is now updated....

Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
1
Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder. 
2
Connect a set of audio
cables between the AUDIO
IN jacks on the TV and the
AUDIO OUT jacks on the
camcorder. If you have a
mono Camcorder, connect
L(mono) to the Camcorder
audio out using only one
audio cable.
3
Connect a video...

Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y, PB, PR
1
Connect a set of audio
cables between the 
COMPONENT (1 or 2)
AUDIO (L, R) IN jacks on 
the TV and the AUDIO OUT
jacks on the DVD player.
2
To enable Component video
viewing, connect a set of 
video cables between the 
COMPONENT (1 or 2) 
VIDEO (Y, P
B, PR) IN jacks 
on  the TV and VIDEO 
(Y/P
B/PRor Y/CB/CR) OUT 
jacks on the DVD player.  
Connecting to Audio and Video...

Connecting a DTV Set-Top Box
Connecting to Y, PB, PR
1
Connect a set of audio
cables between the 
COMPONENT (1 or 2) 
AUDIO (L, R) IN jacks on 
the TV and the AUDIO OUT 
jacks on the Set-Top Box.
2
Connect a set of video
cables between the 
COMPONENT (1 or 2) 
VIDEO (Y, P
B, PR) IN jacks 
on the TV and VIDEO 
(Y/P
B/PRor Y/CB/CR) OUT 
jacks on the Set-Top Box.
Connecting to DVI (Digital Visual Interface)
1
Connect a set of audio
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT...

Connecting to HDMI (High Definition Multimedia Interface)
1
Connect an HDMI cable
between the HDMI/DVI IN 
jack on the TV and the HDMI
OUT jack on the Set-Top Box.
NOTE
•Make sure the HDMI/DVI
source’s power is on, or you
will be unable to select it in the
TV menu’s source list.
Connections
English - 26
TV Rear Panel
DTV Set-Top Box Incoming
Cable or 
Antenna
BP68-00496A-01(018~029)  3/8/05  3:00 PM  Page 26 

Connecting a Digital Audio System
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner’s manual.
1
If your audio system has an
optical digital audio input,
connect to the “DIGITAL
AUDIO OUT (OPTICAL)” jack
on the TV.
NOTE
•OPTICAL: converts the electric
signal into an optical light 
signal, and transmits it through
glass fibers. A transmission 
system of digital audio in the
form...

SAMSUNG
BP68-00496A-01(018~029)  3/8/05  3:00 PM  Page 28 

Operation
BP68-00496A-01(018~029)  3/8/05  3:00 PM  Page 29 

Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Viewing the Menus and On-Screen Displays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu 
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use
the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. 
You can also view the on-screen menu system and make...