Samsung HL-R4266W DLP TV User Manual
Have a look at the manual Samsung HL-R4266W DLP TV User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 41 Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the …or †button to select “Sleep Timer”, then press the ENTER button. 3 Press the …or †button to adjust “Minute”. 4 Setting the Timer sets the Activation to “Yes” automatically. Press the EXIT button to exit. Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from “30 min” to “180 min”). Time 1/ 1/ 2005/ 12 : 00 am Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Guide Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sleep Timer MoveAdjustReturn Input Picture Sound Channel Setup GuideSet sleep timer. MinuteActivation ---No▲ ▼ Sleep Timer MoveAdjustReturn Input Picture Sound Channel Setup GuideSet sleep timer. MinuteActivation 30 Yes▲ ▼ Sleep Timer : 90 min BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 41
English - 42 Operation Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ENTER button to select “Source List”. Press the …or †button to select a signal source, then press the ENTER button. Alternate method Press the SOURCE button on the remote control repeatedly to select an external signal source.AV 1 •When you connect equipment to the TV, you can choose between the following sets of jacks: “AV1”, “AV2”, “S-VIDEO1”, “S-VIDEO2”, “COMPONENT1”, “COMPONENT2”, or “HDMI/DVI” on the TV’s rear panel and “AV3” or “S-VIDEO3” on the TV’s side panel. •HDMI input can be selected only when the external device is turned on and connected to the TV. Input Source List : TV√Edit Name√Anynet MoveEnterReturn Input Picture Sound Channel Setup Guide Source List TV AV 1----AV 2----AV 3----S-Video1----S-Video2----S-Video3----▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 42
English - 43 Assigning Names to External Input Mode This feature enables you to name the input source you have connected. 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the …or †button to to select “Edit Name”, then press the ENTER button. 3 Press the …or †button to select a signal source to edit, then press the ENTER button. 4 Press the …or †button to select the external device : VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB, PVR STB, AV Receiver, DVD Receiver, GAME, Camcorder,DVD Combo, DVD HDD Recorder, Internet TV Recv., Interactive TV Recv., VOD (Video On Demand) STB, TV. Press the ENTER button. Set other signal sources (AV2, AV3, S-Video1, S-Video2, S-Video3, Component1, Component2, HDMI) using the same method as listed above. Press the EXIT button to exit. Input Source List : TV√Edit Name√Anynet MoveEnterReturn Input Picture Sound Channel Setup Guide Input Source List : TV√Edit Name√Anynet MoveEnterReturn Input Picture Sound Channel Setup Guide Edit Name AV 1 : ----√AV 2 : ----√AV 3 : ----√S-Video1 : ----√S-Video2 : ----√S-Video3 : ----√Component1 : ----√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Edit Name AV 1 : ---AV 2 : ---AV 3 : ---S-Video1 : ---S-Video2 : ---S-Video3 : ---Component1 : ----▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide ----VCR DVD D-VHS Cable STB HD STB Satellite STB PVR STB ▼ BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 43
SAMSUNG BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 44
Channel Control BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 45
Channel Control English - 46 Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control. To Store Your Favorite Channels: 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Favorite Channels”, then press the ENTER button. Press the …or † button to select a channel, then press the ENTER button and a check mark will appear. Press the ENTER button again to deselect the selected channel and the check mark will disappear. Press the EXIT button to exit. NOTES • Only memorized channels can be set as Favorite channels. • Select All : Press to select all channels. • Clear All : Press to clear all channels. To View Your Favorite Channels: Press the FAV.CH button repeatedly to jump from one favorite channel to another. Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Favorite Channels MoveEnterReturn Input Picture Sound Channel Setup Guide Air2 ✔Air3Air4Air5Air6Air7Air8▼ Select All Clear All BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 46
English - 47 Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below to the channel number. 1 Press the CH or CH button to tune to the channel that will be labeled. 2 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. Press the …or †button to select “Name”, then press the ENTER button. 3 Press the …or †button to move to the channel to be assigned to a new name, then press the ENTER button. Press the …or †button to select a letter, a number or a blank. (Results in this sequence: A...Z, 0...9, +, -, ✽, /, blank). 4 Press the √button to switch to the next field, which will be selected. Select a second letter or digit pressing …or †button, as above. Repeat the process to select the last three digits. When you have finished, press the ENTER button. To erase the assigned new name, select “Clear” by pressing the œor √button, then press the ENTER button. Press the EXIT button to exit. NOTE •If you add or delete a TV channel, the labeled channels will also be added or deleted. Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Name MoveAdjustReturn Input Picture Sound Channel Setup Guide ClearClearClearClearClear Air2 AAir3Air4Air5Air6 ▲ ▼ ▼ Name MoveAdjustReturn Input Picture Sound Channel Setup Guide ClearClearClearClearClear Air2 CNN02Air3Air4Air5Air6 ▲ ▼OK OK ▼ BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 47
English - 48 Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Fine Tune”, then press the ENTER button. 3 Press the œor √button to adjust the fine tuning. 4 To store the fine tuning setting in the TV’s memory, press the ENTER button. To reset the fine tuning setting, press the †button to select “Reset”, then press the ENTER button. 5 Press the EXIT button to exit. NOTE •Only analog TV channels can be fine tuned. Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Fine Tune Cable 26 Not Fine Tuned 0 MoveEnterReturn Reset Fine Tune Cable 26 Not Fine Tuned 3 AdjustSaveReturn Reset Fine Tune Cable 26 Fine Tuned 3 AdjustSaveReturn Reset Analog BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 48
English - 49 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Signal Strength”, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Press the EXIT button to exit. Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Signal Strength EnterReturn Input Picture Sound Channel Setup Guide OK Digital BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 49
Channel Control English - 50 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “LNA”, then press the ENTER button. 3 Press the …or †button to select “On” or “Off”, then press the ENTER button. 4 Press the EXIT button to exit. NOTE •LNA functions only when antenna is set to Air. The settings will be stored separately in each channel. Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Air Auto Program Add/Delete Favorite Channels Name Fine Tune Signal Strength LNA : On MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Off On BP68-00496A-00(030~051) 3/3/05 1:07 PM Page 50