Samsung Hl-p5067w Dlp Tv Instruction Manual

Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
1
Press the MENU button. 
Press the 
…or †button to select “Setup”,
then press the ENTER button.
2
Press the …or †button to select “Time”,
then press the ENTER button.
Press the ENTER button to select “Clock”.
3
Press the ENTER button to select “Clock
Mode”.
Press the 
…or †button to select “Auto”,
then press the ENTER button.
4
Press the …or †button to select “Time
Zone”, then press the...

Operation
English - 42
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
2
Press the …or †button to
select “Time”, then press the
ENTER button.
Press the 
…or †button to
select “Sleep Timer”, then
press the ENTER button.
3
Press the …or †button to
adjust “Minute”.
4
Setting the Timer sets the
Activation to ‘Yes’
automatically.
Press the EXIT...

English - 43
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top box or the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select “Input”.
2
Press the ENTER button to
select “Source List”.
Press the 
…or †button to
select a signal source, then
press the ENTER button.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an...

Assigning Names to External Input Mode
This feature enables you to name the input source you have connected.
Operation
English - 44
1
Press the MENU button.
Press the ENTER button to
select “Input”.
2
Press the …or †button to
to select “Edit Name”, then
press the ENTER button.
3
Press the …or †button to
select a signal source to
edit, then press the ENTER
button.
4
Press the …or †button to
select the external device :
VCR, DVD, D-VHS, Cable
STB, HD STB, Satellite STB,
PVR STB, AV Receiver, DVD
Receiver,...

Channel Control
3_BP68-00413A-00(32~51)  10/12/04  10:18 AM  Page 45 

English - 46
Channel Control
Selecting Your Favorite Channels
You can store your favorite channels for each available input source (such as TV and CATV). 
This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH
button on the remote control.
To Store Your Favorite Channels:
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Favorite Channels”,
then press the ENTER button.
Press the 
…or...

English - 47
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear next to the channel
number.
1
Press the CH  or CH  button to tune to the channel that
will be labeled. 
2
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
Press the...

English - 48
Channel Control
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Fine Tune”, then press
the ENTER button.
3
Press the œor √button to
adjust the fine tuning.
4
To store the fine tuning
setting in the TV’s memory,
press the ENTER button. 
To reset the fine tuning
setting, press the 
†button to
select...

English - 49
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV)
channels have either perfect reception quality or you will not receive them at all. So, unlike analog
channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or...

English - 50
Channel Control
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “LNA”, then press the
ENTER button.
3
Press the …or †button to
select “ON”, then press the
ENTER button.
Pressing the 
…or †button
will alternate between “On”
and...