Samsung Hl-p5067w Dlp Tv Instruction Manual
Here you can view all the pages of manual Samsung Hl-p5067w Dlp Tv Instruction Manual. The Samsung manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 11
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves. NOTES •Be sure the replacement Lamp is the same type. •After replacing the lamp, align the lamp cover with the groove and secure the screws. •The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit). 1 Unplug TV, then use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Remove the screw securing the Lamp by using a screwdriver. 4 Separate the Lamp from the...
Page 12
English - 12 List of Features Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features: • Easy-to-operate remote control • Easy-to-use on-screen menu system you can access from the side panel or remote control • Automatic timer to turn the TV on and off at any time you choose • Adjustable picture and sound settings and the ability to memorize your favorite settings • Automatic...
Page 13
English - 13 Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. : Light is On : Light is Blinking : Light is Off • It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. • The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working. TIMER Standby state. The picture will automatically appear in about 15 seconds. Auto Timer ON/OFF has been set and the unit will automatically be...
Page 14
Your New Wide TV English - 14 Right side buttons The buttons on the right side panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. Press to switch between viewing TV programs and signals from connected components. Press to see the on-screen menu. Press to raise or lower the volume and to select items when using the on-screen menu. Press to change channels and move between items on the on-screen menu. Press to...
Page 15
English - 15 Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the rear panel of your TV. For more information, please see “Connections”. ŒANTENNA terminalsTwo independent cables or antennas can be connected to these terminals. Use “Cable IN” and “Air IN” terminals to receive a signal from VHF/UHF...
Page 16
Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung Set-Top Box. See pages 38~39 for details. Your New Wide TV English - 16 1. POWERTurns the TV on and off. 2. P.MODEAdjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings.) 3. ANTENNAPress to select “AIR”...
Page 17
Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote control for a long time, remove the batteries and store them in a cool dry place. 1 Slide the back cover all the way out to open the battery compartment...
Page 20
English - 20 Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. 1 Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adapter into the “Air IN” terminal on the rear panel. Antennas with 75-ohm Round Leads If...