Samsung Hl-p5067w Dlp Tv Instruction Manual

							• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws. 
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
1
Unplug TV, then use a
screwdriver to remove the
screw.
2
Remove the Lamp cover.
3
Remove the screw securing
the Lamp by using a
screwdriver.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.
English - 11
1_BP68-00413A-00(02~17)  10/12/04  10:16 AM  Page 11 
						

							English - 12
List of Features
Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance
unit that exceeds industry standards. In addition, it has these special features:
• Easy-to-operate remote control
• Easy-to-use on-screen menu system you can access from the side panel or remote control
• Automatic timer to turn the TV on and off at any time you choose
• Adjustable picture and sound settings and the ability to memorize your favorite settings
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Picture-in-Picture capability that let you watch two channels at once
• Widescreen TV with adjustable image size
• Life-like clear images provided by DNle technology
• My Color Control Mode for corresponding with your color style
• Color weakness Mode
• Digital Input (Digital Visual Interface) jack
• Digital Audio Output (OPTICAL) jack
• AV network system (Anynet) that enables you to easily control Samsung audio-video(AV) devices from
this TV.
• CableCARD slot
Accessories
Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any
piece is missing or broken, call your dealer. 
Your New Wide TV
Remote Control
(BP59-00076A)/
AAA BatteriesInstruction Manual/
Safety Guide/
Quick Guide/
Anynet ManualAnynet CableWarranty Cards (2)/
Registration Card (1)
1_BP68-00413A-00(02~17)  10/12/04  10:16 AM  Page 12 
						

							English - 13
Front Panel LED Indicators 
The three lights on the front panel indicate the status of your TV.
: Light is On
: Light is Blinking
: Light is Off
•  It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
•  The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
TIMER
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the unit will automatically be
turned on in about 25 seconds.
A cooling fan inside the set is not operating normally.
Lamp cover on rear of the set is not properly shut.
Check if the ventilation hole on the rear of the set is blocked, because if
the inner temperature is too high, the power will shut off. 
Lamp may be defective. Please contact a certified technician.
LAMPSTAND BY/TEMPIndication
Remote Control Sensor  
Aim the remote control towards this spot on the TV.
POWER
Press to turn the TV on and off.
1_BP68-00413A-00(02~17)  10/12/04  10:16 AM  Page 13 
						

							Your New Wide TV
English - 14
Right side buttons
The buttons on the right side panel control your TV’s basic features, including the on-screen menu
system. To use the more advanced features, you must use the remote control.
Press to switch between viewing TV programs and signals from connected components.
Press to see the on-screen menu.
Press to raise or lower the volume and to select items when using the on-screen menu.
Press to change channels and move between items on the on-screen menu.
Press to activate (or change) a particular item.
Side Panel Jacks
Use the rear of right sidepanel jacks to connect a component that is used only occasionally (a
camcorder or video game, for example).
Connect the video signal from a camcorder or video game.
Connect the audio signal from a camcorder or video game.
Connect an S-video signal from a camcorder or video game.
(S-Video 3 jack and A/V input 3 are used together.)
1_BP68-00413A-00(02~17)  10/12/04  10:16 AM  Page 14 
						

							English - 15
Rear Panel Jacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components
such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and
two sets of component video input jacks on the rear panel of your TV. For more information, please see
“Connections”.
ŒANTENNA terminalsTwo independent cables or antennas can be connected to these terminals.
Use “Cable IN” and “Air IN” terminals to receive a signal from VHF/UHF
antennas or your cable system. Use the “Cable OUT” terminal to send the
signal being received by the “Cable IN” terminal out to another component
(such as a Cable Set-Top Box). (Refer to page 20)
´S-VIDEO INPUT jacksConnects an S-Video signal from an S-VHS VCR or DVD player. 
(Refer to page 25)
ˇDVI (Digital Video Interface) AUDIO INPUT jacksConnect to the digital audio output jacks of a device with DVI output.
(Refer to page 27)
¨ VIDEO/AUDIO INPUT jacks Connect video/audio signals from external sources, such as VCR or DVD
players. (Refer to page 26)
ˆVIDEO/AUDIO OUTPUT jacks  Sends a video signal from the TV to an external source, such as a VCR.
Note: It is available only in RF, Video and S-Video modes. 
ØComponent1, 2 jacks (Y, PB, PR, L, R) Use these jacks to connect the component video/audio signals from a DVD
player or a set-top box.
(Refer to page 26~27)
∏DIGITAL AUDIO OUT(OPTICAL) jackConnect to a Digital Audio Component. (Refer to page 29)
”Anynet Please refer to the Anynet Owner’s Instruction. 
This jack is for repair and software upgrades. 
’HDMI (High Definition Multimedia Interface)/
DVI INPUT jack
Connect to the HDMI jack of a device with HDMI output.
Connect to the digital video output jack for device with DVI output.
(Refer to page 27~28)
˝CableCARDTM
Insert the CableCARD into the slot. (Refer to page 24)
1_BP68-00413A-00(02~17)  10/12/04  10:16 AM  Page 15 
						

							Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote control, always
point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD
player or Samsung Set-Top Box. See pages 38~39 for details. 
Your New Wide TV
English - 16
1. POWERTurns the TV on and off.
2. P.MODEAdjust the TV picture by selecting one of the
preset factory settings (or select your personal,
customized picture settings.)
3. ANTENNAPress to select “AIR” or “CABLE”.
4. CHANNEL NUMBER Press to directly tune to a particular channel.
5. -Press to select additional channels (digital and
analog) being broadcast by the same station.
For example, to select channel “54-3”, press
“54”, then press “-” and “3”.
6.  VOL +, VOL -Press to increase or decrease the volume.
7. MUTEPress to mute the TV sound.
8. ANYNETRuns the Anynet view functions and sets up
Anynet devices.
9. MENUDisplays the main on-screen menu.
10. CH.LISTDisplays the channel list.
11. FAV.CH (Favorite Channel)Press to switch between your favorite channels.
12. MODE
Selects a target device to be controlled by the
Samsung remote control (i.e., TV, STB, VCR,
CABLE, or DVD).
13. PRE-CHTunes to the previous channel.
14. SOURCEPress to display all of the available video
sources (i.e., TV, Set-Top box, VCR, DVD, DTV).
15. CH /Press to change channels. 
Moves from one set of screen information to the
next in TV Guide menu.
16. INFOPress to display information on the TV screen.
17. EXITPress to exit the menu.
18.▲, ▼, œ, √, ENTERPress to select highlight up, down, left, or right.
While using the on-screen menus, press the
ENTER to activate (or change) a particular item.
19. MTS (Multichannel
Television Stereo)
Press to choose Stereo, Mono or SAP (Secondary
Audio Program).
20. PIP (Picture In Picture)Displays the available channels in
sequence. (These buttons change channels in the
PIP window only.)
21. STILLPress to pause the current screen.
22. ASPECTPress to change the screen size.
23. SRSActivates TruSurround.
24. DNIe (Digital Natural
Image engine)
Activates DNIe.
25. SETUsed during set up of this remote control, so
that it will work compatibly with other devices
(Set-Top box, VCR, Cable box, DVD, etc.)
26. SLEEPPress to select a preset time interval for
automatic shut off.
27. PIP ControlsCH /; Press to display the available
channels in sequence. (These buttons change
channels in the PIP window only.)
28. CAPTIONControls the caption decoder.
29. VCR/DVD ControlsControls VCR or DVD functions: Rewind, Stop,
Play/Pause, Fast Forward.
30. RESETIf your remote control is not functioning
properly, take out the batteries and press the
reset button for about 2~3 seconds. Re-insert
the batteries and try using the remote control
again. 
1_BP68-00413A-00(02~17)  10/12/04  10:16 AM  Page 16 
						

							Installing Batteries in the Remote Control
With normal use, the batteries in the remote control should last about a year. If you notice a performance
degradation while using the remote, the batteries may need to be replaced. Make sure you replace both
batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote
control for a long time, remove the batteries and store them in a cool dry place.
1
Slide the back cover all the way out
to open the battery compartment of
the remote control.
2
Install two AAA size batteries.
Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
3
Slide the cover back into place.
English - 17
NOTE
•Do not mix battey types, I.e, alkaline and manganese.
1_BP68-00413A-00(02~17)  10/12/04  10:16 AM  Page 17 
						

							SAMSUNG
2_BP68-00413A-00(18~31)  10/12/04  10:16 AM  Page 18 
						

							Connections
2_BP68-00413A-00(18~31)  10/12/04  10:16 AM  Page 19 
						

							English - 20
Connections
Connecting VHF and UHF Antennas
If you do not have a cable system, you will need to connect an antenna to your TV.  
Antennas with 300-ohm Flat Twin Leads
If your antenna looks like this:                         it has 300-ohm flat twin leads.
1
Place the wires from the twin
leads under the screws on the
300-75 ohm adaptor (not
supplied). Use a screwdriver
to tighten the screws.
2
Plug the adapter into the “Air
IN” terminal on the rear
panel. 
Antennas with 75-ohm Round Leads
If your antenna looks like this:                          it is an antenna with 75-ohm round leads.
1
Plug the antenna lead into the
“Air IN” terminal on the rear
panel.
2_BP68-00413A-00(18~31)  10/12/04  10:16 AM  Page 20