Samsung Hl-p5067w Dlp Tv Instruction Manual

Sound Control
4_BP68-00413A-00(52~71)  10/12/04  10:20 AM  Page 71 

English - 72
Sound Control
Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
Adjusting the Volume
Press the VOL+ or VOL– buttons to increase or decrease the
volume.
Using the MUTE Button
At any time, you can temporarily
cut off the sound.
Press the MUTE button on the
remote control.
The message “Mute” is displayed
and the sound cuts off.
To turn mute off, press the MUTE
button again or press either the
VOL+ or VOL– button.
Customizing the Sound...

English - 73
3
Press the œor √button to select a
particular item to be changed.
Press the 
…or †button to increase or
decrease the selected frequency.
Press the EXIT button to exit.
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are
preset at the factory. You can select “Custom”, which automatically recalls your personalized
sound settings.
1
Press the MENU button. 
Press the 
…or †button to select “Sound”,
then press the ENTER...

English - 74
Sound Control
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. Trusurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “SRS...

English - 75
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Auto Volume”,...

English - 76
Sound Control
Choosing a Multi-Channel Sound (MTS) track
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks
(for example, simultaneous translations of the program into foreign languages).
The availability of these additional “multitracks” depends upon the program.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Multi-Track Options”,
then press the ENTER button.
3...

English - 77
Choosing a Multi-Channel Sound (MTS) track
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Multi-Track Options”,
then press the ENTER button.
3
Press the …or †button to
select “Multi-Track Sound”,
then press the ENTER button.
Press the 
…or †button to
select a setting you want,
then press the ENTER button.
Press the...

English - 78
Sound Control
Choosing a Digital Sound Format
Digital sound can be output from the rear-panel connector on your TV. The digital sound
output is optical connector labeled “Optical Out”. After connecting an optical digital-audio
component, you must specify the transmission format (Dolby or PCM, as appropriate to your
digital audio component). See the owners manual of your Digital Audio component for further
information.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then...

English - 79
Selecting the Internal Mute
When using a device such as a Home Theater or Amplifier with external speakers, you can set
Internal Mute to On to cut off sound from the TVs internal speakers
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Internal Mute”, then
press the ENTER button.
3
Press the …or †button to
select “On”, then press the
ENTER button.
Pressing the 
…or †button
will alternate between “On”
and...

English - 80
Sound Control
Setting the On/Off Melody
A melody sound can be set to come on when the TV is powered On or Off.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Melody”, then press
the ENTER button.
Press the 
…or †button to
select “On” or “Off”, then
press the ENTER button.
Press the EXIT button to exit.
Sound
Mode : Custom√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼...