Samsung H 264 Manual
Have a look at the manual Samsung H 264 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
APPENDIX 2 COMPATIBLE USB FLASH DRIVE LIST 56 APPENDIX 2 COMPATIBLE USB FLASH DRIVE LIST Please upgrade the firmware of the DVR to the latest version to ensure the accuracy of the following table. If the USB flash drive is not supported by the DVR, the “USB ERROR” message will be shown on the screen. Note: Please use your PC to format the USB flash drive as “FAT32”. Note: You can backup up to 2GB video data for one-time USB backup. To backup more data, please set the time & channel(s) you want, and start USB backup again. MANUFACTURER MODEL CAPACITY Transcend JFV35 4G JFV30 8G Kingston DataTraveler 1G PQI U172P 4G Apacer AH320 2GB AH320A 8GB AH220 1GB AH320 4GB A-data RB-18 1GB Sandisk Cruzer Micro 2G Cruzer Micro 4G Cruzer4-pk 2G Netac U208 1G MSI F200 4G SONY Micro Vault Tiny 2G 2G Micro Vault Tiny 4G 4G Micro Vault Tiny 1G
APPENDIX 3 COMPATIBLE SATA HDD LIST 57 APPENDIX 3 COMPATIBLE SATA HDD LIST Please upgrade the firmware of the DVR to the latest version to ensure the accuracy of the following table. MANUFACTURER MODEL CAPACITY ROTATION Seagate ST3320613AS 320GB 7200 rpm ST33500320AS 500GB 7200 rpm ST3500410SV 500GB 7200 rpm ST3750330AS 750GB 7200 rpm ST31000525SV 1000GB 7200 rpm ST31000340AS 1000GB 7200 rpm WD WD3200AAKS 320GB 7200 rpm WD5000AACS 500GB 7200 rpm WD6400AAKS 640GB 7200 rpm WD7500AAKS 750GB 7200 rpm WD10EADS 1TB 7200 rpm WD15EADS 1.5TB 7200 rpm WD20EADS 2TB 7200 rpm Maxtor STM3500320AS 500GB 7200 rpm STM3750330AS 750GB 7200 rpm HITACHI HDT725032VLA360 320GB 7200 rpm HDS721010KLA330 1000GB 7200 rpm
APPENDIX 4 MAIN MENU STRUCTURE
58
APPENDIX 4 MAIN MENU STRUCTURE
QUICK START GENERAL CHANNEL TITLE
EVENT STATUS
DATE DISPLAY
MOUSE SENSITIVITY
RECORD CONFIG
TIME SETUP DATE
TIME
DATE SETUP DATE INFO DISPLAY DATE OF MODE
FORMAT
DAYLIGHT DAYLIGHT SAVING
SYSTEM TOOLS LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
BACKUP CONFIG
RESTORE CONFIG
SYSTEM INFO BAUD RATE
HOST ID
R.E.T.R. (For Selected Models Only)
AUTO KEY LOCK
CLEAR HDD
RESET DEFAULT
REMOTE CONTROL ID
SERIAL TYPE
VIDEO FORMAT
VERSION
BACKUP DATA (USB)
BACKUP DATA (DVD)
(For Selected Models Only)
BACKUP LOG (USB)
EVENT INFORMATION QUICK SEARCH
EVENT SEARCH
HDD INFO
EVENT LOG
ADVANCED CONFIG CAMERA BRIGHTNESS
CONTRAST
SATURATION
HUE
COV.
REC
CHANNEL TITLE
DETECTION LS
SS
TS
MOTION
ALARM
AREA
ALERT EXT. ALERT
INT. BUZZER
KEY BUZZER
VLOSS BUZZER
MOTION BUZZER
ALARM BUZZER
HDD BUZZER
ALARM DURATION (SEC)
HDD NEARLY FULL (GB)
NETWORK NETWORK
SNTP
APPENDIX 4 MAIN MENU STRUCTURE
59
ADVANCED CONFIG NETWORK FTP
E-MAIL
DDNS
DISPLAY DE-INTERLACE (For Selected Models Only)
FULL SCREEN DURATION
QUAD SCREEN DURATION (For Selected Models Only)
DWELL SCREEN DURATION (For Selected Models Only)
DISPLAY COVERT
HDD DISPLAY MODE
VGA OUTPUT
ALPHA BLENDING
RECORD MANUAL RECORD
EVENT RECORD
TIMER RECORD
PRE-ALARM RECORD
OVERWRITE
EVENT RECORD ALL CH
KEEP DATA LIMIT (DAYS)
RECORD CONFIG
DEVICES
(For Selected Models Only)
SCHEDULE SETTING RECORD
DETECTION
ALARM
APPENDIX 5 DVR BATTERY REPLACEMENT 60 APPENDIX 5 DVR BATTERY REPLACEMENT DVR time reset after power failure, for example, caused by a power outage, will cause the disorder of the recorded data, and users may have problems in searching the event clip they want. To keep the DVR time from resetting, a non-chargeable lithium battery, CR2032, is installed in the DVR. However, the DVR time might still get reset when the DVR battery is low or even running out of power. If so, please replace the DVR battery, CR2032, right away as instructed below. ¾ How to replace CR2032 Note: The lithium battery, CR2032, is a non-chargeable battery, and should be purchased separately. Please replace only with the same or equivalent type battery in case of danger. Step1: Stop all DVR recording immediately to prevent the disorder of the recorded data. Then, back up the recorded data if necessary. Step2: Power off the DVR, and disconnect the DVR power. Step3: Remove the DVR cover, and find the battery on the mainboard. Step4: Push the release as indicated below to remove the battery. Step5: Get a new battery with the side of “CR2032” facing up, and install it to the mainboard. Step6: Replace the DVR cover and connect to power. Step7: Set DVR date & time, and resume recording. For details, please refer to “2.4 Date and Time Setting” at page 9, and “5.2 Record” at page 18.
APPENDIX 6 PIN CONFIGURATION 61 APPENDIX 6 PIN CONFIGURATION ‧ For 16CH Model * The D-Sub connector shown above is optional. Siren: When the DVR is triggered by alarm or motion, the COM connects with NO and the siren with strobe starts wailing and flashing. Magnetic Contact: When the magnetic contact is opened, the alarm will be triggered and the recording is on. PIN FUNCTION DESCRIPTION 1 GND GROUND 2~9 ALARM INPUT Connect ALARM INPUT (PIN 2 -- 9) and GND (PIN 1) connector with wires. Once an alarm is triggered, the DVR will start recording and the buzzer will be on. PIN Alarm Corresponding video channel PIN 2 1 CH1 PIN 3 3 CH3 PIN 4 5 CH5 PIN 5 7 CH7 PIN 6 9 CH9 PIN 7 11 CH11 PIN 8 13 CH13 PIN 9 15 CH15* 10~11 PIN OFF NA 12 RS485-A 13 EXTERNAL ALARM NO Under the normal operation, COM disconnects with NO. But when any alarm is triggered, COM connects with NO. Attention: The voltage restriction is under DC24V 1A. 14 PIN OFF NA 15~22 ALARM INPUT Connect ALARM INPUT (PIN 15 – 22) and GND (PIN 1) connector with wires. Once an alarm is triggered, the DVR will start recording and the buzzer will be on. PIN Alarm Corresponding video channel PIN 15 2 CH2 PIN 16 4 CH4 PIN 17 6 CH6 PIN 18 8 CH8 PIN 19 10 CH10 PIN 20 12 CH12 PIN 21 14 CH14 PIN 22 16 CH16* 23~23 PIN OFF NA 24 RS485-B 25 EXTERNAL ALARM COM Under the normal operation, COM disconnects with NO. But when any alarm is triggered, COM connects with NO. Attention: The voltage restriction is under DC24V 1A.
APPENDIX 6 PIN CONFIGURATION 62 ‧ For 8CH Model * The D-Sub connector shown above is optional. Siren: When the DVR is triggered by alarm or motion, the COM connects with NO and the siren with strobe starts wailing and flashing. Magnetic Contact: When the magnetic contact is opened, the alarm will be triggered and the recording is on. PIN FUNCTION DESCRIPTION 1 GND GROUND 2~5 ALARM INPUT Connect ALARM INPUT (PIN 2 – 5) and GND (PIN 1) connector with wires. Once an alarm is triggered, the DVR will start recording and the buzzer will be on. PIN Alarm Corresponding video channel PIN 2 1 CH1 PIN 3 3 CH3 PIN 4 5 CH5 PIN 5 7 CH7 * 6 ~ 11 PIN OFF NA 12 RS485-A 13 EXTERNAL ALARM NO. Under the normal operation, COM disconnects with NO. But when any alarm is triggered, COM connects with NO. Attention: The voltage restriction is under DC24V 1A. 14 PIN OFF NA 15~18 ALARM INPUT Connect ALARM INPUT (PIN 15 – 18) and GND (PIN 1) connector with wires. Once an alarm is triggered, the DVR will start recording and the buzzer will be on. PINAlarm Corresponding video channel PIN 15 2 CH2 PIN 16 4 CH4 PIN 17 6 CH6 PIN 18 8 CH8 * 19~23 PIN OFF NA 24 RS485-B 25 EXTERNAL ALARM COM Under the normal operation, COM disconnects with NO. But when any alarm is triggered, COM connects with NO. Attention: The voltage restriction is under DC24V 1A.
APPENDIX 6 PIN CONFIGURATION 63 ‧ For 4CH Model * The D-Sub connector shown above is optional. Siren: When the DVR is triggered by alarm or motion, the COM connects with NO and the siren with strobe starts wailing and flashing. Magnetic Contact: When the magnetic contact is opened, the alarm will be triggered and the recording is on. PIN FUNCTION DESCRIPTION 1~4 ALARM INPUT Connect ALARM INPUT (PIN1 – 4) and GND (PIN5) connector with wires. Once an alarm is triggered, the DVR will start recording and the buzzer will be on. PIN Alarm Corresponding video channel PIN 1 1 CH1 PIN 2 2 CH2 PIN 3 3 CH3 PIN 4 4 CH4 * 5 GND GROUND 6 EXTERNAL ALARM COM Under the normal operation, COM disconnects with NO. But when any alarm is triggered, COM connects with NO. Attention: The voltage restriction is under DC24V 1A. 7 EXTERNAL ALARM NO Under the normal operation, COM disconnects with NO. But when any alarm is triggered, COM connects with NO. Attention: The voltage restriction is under DC24V 1A. 8 RS485-A 9 RS485-B 10~11 GND GROUND
APPENDIX 7 DVD WRITER INSTALLATION 64 APPENDIX 7 DVD WRITER INSTALLATION Some DVR models allow users to install a DVD writer by themselves. To know whether your DVR supports this feature, please check with your local distributor or retailer. The supported DVD writer models are as follows. Please use only the suggested DVD writer models to ensure the compatibility. Type Brand Model SATA Liteon iHAS120 SONY AD-7240S Note: Before installing the DVD writer, make sure your DVR is powered off and your DVR supports this feature. Step1: Remove the DVR cover, and find the DVD writer bracket to remove it. Step2: Put the DVD writer in the bracket, and fix it to the bracket with two screws (optional) on each side. Step3: Connect the data bus and power cables* to the SATA DVD writer. *Data bus & power cables are optional. Step4: Connect the data bus and power cables to the data bus and power jack on the DVR main board. Note: Make sure the power cable of the DVD writer is plugged into the black jack on the DVR main board. This power jack can supply power to one hard disk and one DVD writer simultaneously. The white jack is used to supply power to only one hard disk. Step5: Replace the bracket to the DVR base and fix it.
APPENDIX 8 DVD- / CD-ROM COMPATIBLE LIST 65 APPENDIX 8 DVD- / CD-ROM COMPATIBLE LIST ‧ DVD-ROM List Disc Type Manufacturer Disc MID-TID Code 20X DVD+R RITEK RITEK R05 (rev:och) 16X DVD+R SONY SONY....-D21 TAIYO YUDEN YUDEN000-T03 MITSUBISHI MCC.....-004 TDK TDK.....-003 MAXELL MAXELL..003 MBI MBIPG101-R05 CMC CMC MAG.-M01 DAXON DAXON...-AZ3 RITEK RITEK...-R05 PRODISC PRODISC.-R05 8X DVD+R TAIYO YUDEN YUDEN000-T02 MITSUBISHI MCC.....-003 CMC CMC MAG.-E01 PRODISC PRODISC.-R03 8x DVD+RW Ritek RITEK...-008 MITSUBISHI MKM.....-A03 4X DVD+RW SONY SONY....-S11 MITSUBISHI MKM.....-A02 RITEK RITEK...-004 16X DVD+R9 RITEK RITEK S06 8X DVD+R9 MITSUBISHI MKM.....-003 CMC CMC MAG-D02 RITEK RITEK...-D03 2.4X DVD+R9 MITSUBISHI MKM.....-001 20X DVD-R RITEK RITEKF-2 16x DVD-R SONY SONY16-D1 TAIYO YUDEN TYG03 MITSUBISHI MCC 03 RG20 TDK TTH02 MAXELL MXL RG04 MBI MBI 01-RG40 CMC CMC MAG.AM3 RITEK RITEK F1 8X DVD-R RITEK RITEKG 05 SONY SONY08 D1 PRODISC PRODISCS04 TAIYO YUDEN TYG02 MITSUBISHI MCC 02RG20 TDK TTH01 MAXELL MXL RG03 CMC CMC MAG.AE1