Samsung H 264 Manual

 
中文_k679b_677b_674b_c551b_m759b_757b_751b_688b_686b_a791b_Manual_V1.0 
H.264 Network DVR 
User Manual 
GUI Display with USB Mouse Control 
 
Please read instructions thoroughly before operation and retain it for future reference.   
For the actual display & operation, please refer to your DVR in hand.  

 
 
IMPORTANT SAFEGUARD 
 
CAUTION 
 RISK OF ELECTRIC SHOCK 
CAUTION:  
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this 
apparatus from the type of power source indicated on the label. The company shall not be liable for any 
damages arising out of any improper use, even if we have been advised of the possibility of such 
damages.
 
 
 
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 
user to the...

 
 Grounding 
This is a Safety Class 1 Product (provided with a protective earthing ground incorporated in the power cord). The 
mains plug shall only be inserted in a socket outlet provided with a protective earth contact. Any interruption of the 
protective conductor inside or outside of the instrument is likely to make the instrument dangerous. Intentional 
interruption is prohibited. 
Water & Moisture 
Do not expose this product to dripping or splashing and that no objects filled with liquids, such...

 
 
TABLE OF CONTENTS 
1. BEFORE USING THIS DVR ......................................................................... 1 
1.1 Package Content ......................................................................................................... 1 
1.2 Front Panel .................................................................................................................. 1 
1.3 Rear Panel...

 
 
5.3.3 Alarm Timer ....................................................................................................... 21 
5.4 Detection Setting ........................................................................................................ 22 
5.5 PTZ Camera Setting .................................................................................................. 23 
5.6 System Setting...

BEFORE USING THIS DVR 
1 
1. BEFORE USING THIS DVR 
1.1 Package Content 
¾ Standard Package  
… DVR … HDD screws 
… Adapter & Power cord … CD Manual 
  
¾ Optional Accessories  
… IR Remote Controller … USB Mouse 
… Manual for IR Remote Controller … DSUB Connector 
… IR Receiver Extension Cable   
1.2 Front Panel 
1) LED Indicators 
 HDD is reading or recording. 
 An alarm is triggered. 
 Timer recording is on. 
 Under playback status. 
 DVR is powered on. 
2)  (▲) /  (▼) /  (◄) /  (►) 
Press ▲ / ▼ /...

BEFORE USING THIS DVR 
2 
7) SLOW 
In the playback mode, press to show slow playback. 
8) ZOOM
 
Press to enlarge the picture of selected channel in the FRAME or FIELD recording 
mode. 
9) SEQ
 
Press to display each channel in full screen one by one starting from CH1. When the last 
channel is displayed, it will repeat from CH1 again. To exit this mode, press “SEQ” 
again. 
10) 
 
Press to show the 4-channel display mode. 
11)  CH1 ~ 16 / 1 ~ 8 / 1 ~ 4
 
Press the channel number keys to select the...

BEFORE USING THIS DVR 
3 
function, please switch to 75Ω. 
2)  VIDEO IN (1 ~ 16 / 1 ~ 8 / 1 ~ 4):
 Connect to the video connector of a camera. 
VIDEO LOOP (1 ~ 16 / 1 ~ 8):
 Video output connector. (For Selected Models Only) 
Note: The DVR will automatically detect the video system of the camera, please 
make sure that the cameras are properly connected to the DVR and 
power-supplied before the DVR is turned on. 
3)  AUDIO IN (1 ~ 4) 
Connect to the audio connector of a camera if the camera supports...

CONNECTION AND  SETUP 
4 
2. CONNECTION AND SETUP 
Before the DVR is powered on, make sure you have installed a hard disk and connected 
at least one camera. For details, please refer to the following sections. 
Note: The DVR is designed to automatically detect the video system of the 
connected cameras (NTSC or PAL). To make sure the system detection is 
correct, please check if the cameras are connected to the DVR and 
power-supplied before the DVR is powered on.  
2.1 SATA HDD Installation 
A SATA HDD...

CONNECTION AND  SETUP 
5 
2-2 To install on the second bracket 
Connect the power connector and 
data bus connector to the HDD.   
When connecting the power cable, 
make sure the cable is passed 
through the power cable of DVD 
writer if your DVR is equipped with 
a DVD writer. This is to prevent the 
HDD power cable from interfering 
with the fan spinning. 
Align the screw holes of the bracket 
with the HDD’s screw holes. Make 
sure the PCB side of the HDD is 
facing up. Then, fasten the HDD to 
the...