Samsung H 264 Manual

CONNECTION AND  SETUP 
6 
 
Step4: Align the screw hole on the each bracket with the screw hole on the each side of 
the HDD as shown below, and fix the HDD to the bracket with a HDD screw 
supplied. 
 
Step5: Close  the  upper cover of the DVR, and fasten all the screws you loosened in Step 1. 
2.2 Camera Connection 
The cameras must be connected and power-supplied before the DVR is powered on. 
Connect the camera with the indicated power supply. Then, connect the camera video 
output to the DVR video...

CONNECTION AND  SETUP 
7 
3)  Connecting to power 
Connect the camera with indicated power supply and make sure it’s power-supplied. 
2.2.2 PTZ Camera Connection (For Selected Models Only) 
The following description is taking our brand’s PTZ camera as an example.   
For DVR setting to control the PTZ camera, please refer to “5.5 PTZ Camera Setting” at 
page 23. For detailed PTZ camera control and operation, please refer to its own user 
manual. 
RJ11 cable 
RS485-A: Red wire 
RS485-B: Green wire 
 
The...

CONNECTION AND  SETUP 
8 
For DVR PIN configuration, please refer to “APPENDIX 6 PIN 
CONFIGURATION” at page 61. For connection details, please check with your 
installer.  
STEP 5: Set the speed dome camera at the DVR side. 
Go to “ADVANCED CONFIG” l “DEVICES” to set the speed dome camera. 
a) Select the device to “PTZ”. 
b) Set the ID to the value the same as the one set in the speed dome camera. 
The default ID of the camera is 000. 
c) Select the protocol to “NORMAL”. 
d) Set the baud rate to the...

CONNECTION AND  SETUP 
9 
2.4 Date and Time Setting 
Before operating your DVR, please set the date and time on your DVR FIRST. 
Note: Please DO NOT change the date or time of your DVR after the recording 
function is activated. Otherwise, the recorded data will be disordered and 
you will not be able to find the recorded file to backup by time search. If 
users change the date or time accidentally when the recording function is 
activated, it’s recommended to clear all HDD data, and start recording...

CONNECTION AND  SETUP 
10  SYSTEM 
 
TOOLS  BAUD RATE  2400 
SYSTEM INFO  HOST ID  000 
BACKUP DATA (USB)  R.E.T.R (For Selected Models Only) 5 
BACKUP LOG (USB)    AUTO KEY LOCK  NEVER 
  CLEAR HDD  HDD-0 
  RESET DEFAULT SUBMIT 
  REMOTE CONTROL ID 000 
  SERIAL TYPE  RS485 
  VIDEO FORMAT  NTSC 
  VERSION 1025-1011-1011-1012 
   
EXIT   
2.6 Password Setting 
Right-click to show the main menu, and select “SYSTEM” Æ “TOOLS” to change the 
DVR password.   
There are two user levels: ADMIN & OPERATOR....

GUI DISPLAY WITH USB MOUSE CONTROL 
11 
3. GUI DISPLAY WITH USB MOUSE CONTROL 
3.1 Connect USB Mouse 
Connect your USB mouse to one of the USB ports on the DVR front panel, and check if 
there’s a mouse icon (
) on the screen, indicating the USB mouse is detected properly.   
Move your mouse to enter the DVR password with the password keypad. The default 
administrator password is 0000. The status will be changed from 
 (key lock) to  
(administrator), and the quick menu bar appears on the left side of...

GUI DISPLAY WITH USB MOUSE CONTROL 
12 
Click to select the audio channel you want: 
In the live mode, only the live audio channels 
can be selected. 
In the playback mode, live and playback 
audio channels can be selected. 
Click to enter the PTZ mode and show the 
PTZ camera control panel. For details, please 
refer to “3.2.2 PTZ Control Panel” at page 12.
 Click to show the power off panel to either 
halt or reboot the system. 
3.2.1 Channel Switch 
Click   on the quick menu bar to display the panel...

GUI DISPLAY WITH USB MOUSE CONTROL 
13 
 
Camera Menu Click to enter the camera main menu.   
For details about each camera menu, please refer to its 
own user manual. 
 Enter Click to confirm your selection / enter the menu. 
 /  /  / 
 
Up / Down / Left / 
Right Click to move your selection up / down / left / right, or 
change settings. 
 /  Iris + / Iris - This two buttons are designed for the PTZ camera 
which uses Pelco-D to control. To know the actions 
after clicking Iris + and Iris -, please...

BASIC OPERATION 
14 
4. BASIC OPERATION 
4.1 Live Page 
 
Icon Function  Icon Function  Icon Function 
 Live audio channel (1~4)  Playback audio channel 
(1~4)  Audio channel off 
 Digital zoom on Digital zoom off Timer recording 
 Network disconnected Internet connected LAN connected 
 USB mouse connected  USB flash drive / device 
connected  No USB device 
connected 
 Key lock PTZ mode on HDD overwrite 
 Administrator Operator Sequence 
 Motion  Recording  Alarm 
 Record mode: Frame Record mode: Field...

BASIC OPERATION 
15 
4.3 Playback 
Click “” on the quick menu bar to display the playback control panel, and click  to 
play the latest recorded video clip, or click 
  to enter the search list. 
 
Note: There must be at least 8192 images of recorded data for playback to work 
properly. If not, the device will stop playback. For example, if the IPS is set 
to 30, the recording time should be at least 273 seconds (8192 images / 30 
IPS) for the playback to work properly. 
 
Note: During playback, the...