Samsung H 264 Manual

BASIC OPERATION 
16 
4.3.2 Event Search 
Click   to quickly search the recorded files by event lists: RECORD / MOTION / 
ALARM / TIME, or select FULL to show all the event logs. 
To quickly search the time you want, select “QUICK SEARCH”. Set the time range you 
want, and select “SUBMIT” to play the recorded video clip during the specified time. 
4.3.3 Audio Playback 
In the playback mode, click   on the quick menu bar as many times as needed to 
select live or playback audio from audio channel 1~4....

FREQUENTLY-USED FUNCTIONS 
17 
5. FREQUENTLY-USED FUNCTIONS 
5.1 Quick Search 
Press “LIST” on the DVR front panel to enter the time search menu as follows: 
EVENT INFORMATION 
  
 HARD DISK  ALL HDD 
 CHANNEL ; 01 † 02 † 03 † 04  
  ; 05 † 06 † 07 † 08  
  ; 09 † 10 † 11 † 12  
  ; 13 † 14 † 15 † 16  
                            
  W   2009  X     NOV       
 SUN  MON  TUE  WED THU FRI  SAT  
 1 2 3 4 5 6 7  
 8  9  10 11 12 13 14  
 15 16 17 18 19 20 21  
 22 23 24 25 26 27 28  
 29 30       
00...

FREQUENTLY-USED FUNCTIONS 
18 
5.2 Record 
5.2.1 Quick record setting 
Right-click to display the main menu, and select “QUICK START” Æ “GENERAL” Æ 
“RECORD CONFIGURATION”. 
Click “SETUP” to enter the setting page individually for manual record, event record and 
timer record. 
QUICK START 
 
GENERAL  CHANNEL TITLE  ON 
TIME SETUP    EVENT STATUS  ON 
  DATE DISPLAY ON 
  MOUSE SENSITIVITY - ׀ ׀ ׀ ׀ ׀ ׀ ׀ ׀ ׀ + 
     
  RECORD CONFIG SETUP 
     
     
     
     
   
EXIT   
a)  Select the record type...

FREQUENTLY-USED FUNCTIONS 
19 
5.2.2 Detailed record setting 
Right-click to display the main menu, and select “ADVANCED CONFIG” Æ “RECORD”. 
Note: Please DO NOT change the date or time of your DVR after the recording 
function is activated. Otherwise, the recorded data will be disordered and 
you will not be able to find the recorded file to backup by time search. If 
users change the date or time accidentally when the recording function is 
activated, it’s recommended to clear all HDD data, and start...

FREQUENTLY-USED FUNCTIONS 
20 
7)  KEEP DATA LIMIT (DAYS) 
Assign the maximum recording days from 01 to 31 after which all the recorded data 
will be removed, or select “OFF” to disable this function. 
8) RECORD CONFIG
 
Please refer to “5.2.1 Quick record setting”. 
5.3 Schedule Setting 
Right-click to display the main menu, and select “SCHEDULE SETTING”. 
5.3.1 Record Timer 
Click “RECORD”. In “RECORD TIMER”, select “ON” to enable record timer, and select 
the day and time for this function. 
SCHEDULE...

FREQUENTLY-USED FUNCTIONS 
21 
5.3.2 Detection Timer 
Click “DETECTION”. In “DETECTION TIMER”, select “ON” to enable record timer, and 
select the day and time for this function. 
SCHEDULE SETTING 
 
RECORD  DETECTION TIMER ON  
DETECTION   0    2    4    6    8    10   12   14   16   18   20   22  24  
ALARM  SUN                                                   
  MON                                                   
  TUE                                                   
  WED...

FREQUENTLY-USED FUNCTIONS 
22 
5.4 Detection Setting 
Right-click to display the main menu, and select “ADVANCED CONFIG” Æ 
“DETECTION”. 
ADVANCED CONFIG 
 
C A M E R A   CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 W X 
DETECTION  LS  07 
ALERT  SS  03 
NETWORK  TS  02 
DISPLAY  MOTION  OFF 
RECORD  ALARM  OFF 
DEVICES  AREA  EDIT 
     
     
   
EXIT   
1)  LS (Level of Sensitivity) 
“LS” is to set the sensitivity of comparing two different images. The smaller the 
value is, the higher sensitivity...

FREQUENTLY-USED FUNCTIONS 
23 
6) AREA 
Click “EDIT” to set the motion detection area. 
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area 
that is not being detected while the transparent blocks are the area under 
detection. 
5.5 PTZ Camera Setting 
Right-click to display the main menu, and select “ADVANCED CONFIG” Æ “DEVICES”. 
ADVANCED CONFIG 
 
C A M E R A   CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 W X 
DETECTION   DEVICE  PTZ 
ALERT  ID  00 
NETWORK  PROTOCOL...

FREQUENTLY-USED FUNCTIONS 
24 
5.6 System Setting 
5.6.1 Password Setting 
Right-click to display the main menu, and select “SYSTEM” Æ “TOOLS”. 
SYSTEM 
 
TOOLS  LANGUAGE  ENGLISH 
SYSTEM INFO    ADMIN PASSWORD  SETUP 
BACKUP DATA (USB)  OPERATOR PASSWORD  SETUP 
BACKUP LOG (USB)    UPGRADE  SUBMIT 
  BACKUP CONFIG SUBMIT 
  RESTORE CONFIG SUBMIT 
     
     
   
EXIT   
1) ADMIN PASSWORD 
Click “SETUP” to change the administrator password. The default administrator 
password is 0000. 
When you’re...

FREQUENTLY-USED FUNCTIONS 
25 
Note: Before using the USB flash drive, please use your PC to format the USB 
flash drive to FAT32 format first. For the list of compatible USB flash drives, 
please refer to “APPENDIX 2 COMPATIBLE USB FLASH DRIVE LIST” at page 
56. 
5.6.3 Backup & Restore Configurations 
Right-click to display the main menu, and select “SYSTEM” Æ “TOOLS” Æ “BACKUP 
CONFIG” or “RESTORE CONFIG”.   
These two functions allows users to keep the current configurations after DVR upgrade, 
or...