Home > Samsung > Telephone > Samsung Galaxy Note 8 User Manual

Samsung Galaxy Note 8 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Galaxy Note 8 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							3
    Special Features
    Fingerprint Scanner
    Use your fingerprint as an alternative to entering 
    passwords in certain apps. You can also use your 
    fingerprint to verify your identity when logging in to 
    your Samsung account.
    For more information, see  “Fingerprint Scanner ” on 
    page  48.
    Iris Scanner
    Use iris recognition as an alternative to entering 
    passwords in certain apps. You can also use your eyes 
    to verify your identity when logging in to your Samsung 
    account.
    For more information, see  “Iris Scanner ” on page 49.
    Water and Dust 
    Resistance
    This device is rated IP68 using the Ingress Protection 
    rating system.
    For more information, see  “Maintaining Water and 
    Dust Resistance” on page  208. 
    						
    							Learn about your mobile 
    device hardware, assembly 
    procedures, and how to get 
    started using your new device.
    Getting Started  
    						
    							Set Up Your 
    Device
    Learn how to set up your device for 
    the first time.  
    						
    							Set Up Your Device6
    Assemble Your Device
    This section helps you to assemble your device.
    Install the SIM Card and a 
    Memory Card
    When you subscribe to a cellular network, you are 
    provided with a plug-in SIM card. During activation, 
    your SIM card is loaded with your subscription details.
    Warning: Small components such as SIM and Memory 
    Cards can pose a choking risk. Please be careful when 
    handling these cards to avoid damaging them. 
    You can also install an optional microSD
    ™ memory 
    card (not included) to add more memory space to your 
    device. A memory card can be installed at any time. It is 
    not necessary to install it prior to using the device.
    Caution : Be careful when using the removal tool to 
    eject an internal card tray.
    1. Insert the removal tool into the hole on the 
    SIM card/Memory card tray, and then push until the 
    tray pops out.
    2. Place the SIM card on the tray with the gold 
    contacts facing down.
    3. Place the memory card on the tray with the gold 
    contacts facing down.
    4. Slide the SIM card/Memory card tray back into the 
    slot.       
    						
    							Set Up Your Device7
    Note: Your device is IP68 rated for dust and water 
    resistance. To maintain the water-resistant and 
    dust‑resistant features of your device, make sure 
    that the SIM card/Memory card tray openings are 
    maintained free of dust and water, and the tray is 
    securely inserted prior to any exposure to liquids. 
    For more information, see  “Maintaining Water and 
    Dust Resistance” on page  208.
    Charge the Battery
    Note : You should dry the inside of the charging port 
    before inserting a power connector to charge your 
    device. If the charging port is not fully dry, your device 
    may operate abnormally. For example, it may charge 
    more slowly or overheat. For more information, see 
    “Maintaining Water and Dust Resistance” on page  208.
    Your device is powered by a rechargeable, standard 
    Li-Ion battery. A USB charger (charging head and USB 
    cable) is included with the device for charging the 
    battery from any standard outlet. The battery comes partially charged. You can use the 
    device while charging.
    Note
    : For fastest charging times, use the Adaptive 
    Fast Charger that came with your device. This charger 
    provides faster charging only when connected to 
    devices that support Adaptive Fast Charging.
    1. Insert the USB cable into the USB charger/
    Accessory port.  
    						
    							Set Up Your Device8
    Caution
    : Use only charging devices that are approved 
    by Samsung. Samsung accessories are designed for 
    your device to maximize battery life. Using other 
    accessories may void your warranty and may cause 
    damage.
    2. Connect the USB cable to the charging head, and 
    then plug the charging head into a standard outlet.
    3. Unplug the charging head from the outlet and 
    remove the USB cable from the device when 
    charging is complete.
    When to Charge the Battery
    When the battery is low, your device conserves its 
    remaining battery power by dimming the screen. 
    When the battery level becomes too low, the device 
    automatically turns off.
    For a quick check of your battery level:
     ► View the battery charge indicator located in the top 
    right corner of your device’s display. A solid color  
    ( 
     ) indicates a full charge.
    While charging, the device and the charger may 
    become hot when using wireless charging or fast 
    charging. This does not affect the device’s lifespan or 
    performance and is in the device’s normal range of 
    operation. 
    The charger may stop charging if the battery becomes 
    too hot.
    If the device heats up while charging the battery:
    1. Disconnect the charger from the device and close 
    any running apps.
    2. Wait for the device to cool down, and then begin 
    charging the device again.
    • If the lower part of the device overheats, 
    check for damage to the connected USB cable. 
    Replace the damaged USB cable with a new 
    Samsung-approved cable.
    • If using a wireless charger, do not place foreign 
    materials between the device and the wireless 
    charger.  
    						
    							Set Up Your Device9
    Micro-USB Connector
    You can use a Micro‑USB cable to connect your device 
    to a computer with the included Micro-USB connector.
    Note
    : The Micro‑USB connector does not support 
    On-the-Go USB accessories.
    Adaptive
    Fast
    Charging
    Reverse Charging
    The included On‑the‑Go adapter allows you to charge 
    another device through a USB cable.
    You can also use On-the-Go adapter for transferring 
    contacts, photos, and other content from an old device. 
    For more information, see “Transfer Data from Your Old 
    Device” on page  12.
    Start Using Your Device
    Turn Your Device On or Off
    The instructions below explain how to turn your device 
    on or off.
    To turn the device on:
     ► Press and hold the Power  key until the device 
    turns on.
    To turn the device off:
    1. Press and hold the Power  key.
    2. Tap Power off , and confirm if prompted.  
    						
    							Set Up Your Device10
    Lock or Unlock Your Device
    Use your device’s screen lock features to secure your 
    device. By default, the device locks automatically when 
    the screen times out.
    To lock the device:
     ►Press the Power  key.
    The default Screen lock on your device is Swipe. 
    To choose a more secure screen lock, see “Set a Secure 
    Screen Lock” on page  182.
    To unlock the device:
     ► Press the Power key or double‑tap  Home , and 
    then drag your finger across the screen.
    Use the Setup Wizard
    The first time you turn your device on, a Welcome 
    screen is displayed. It guides you through the basics of 
    setting up your device.
    Follow the prompts to choose a default language, 
    connect to a Wi‑Fi® network, set up accounts, choose 
    location services, learn about your device’s features, 
    and more.
    Google Account
    Your new device uses your Google™ Account to fully 
    utilize its Android™ features.
    To set up a Google Account on your device, use 
    Accounts settings.
    1. From a Home screen, swipe up to access Apps .
    2. Tap  Settings > Accounts .
    3. Tap  Add account >  Google.  
    						
    							Set Up Your Device11
    Factory Reset Protection
    When you sign in to a Google Account on your device, 
    Factory Reset Protection is activated. Factory Reset 
    Protection (FRP) prevents other people from using 
    your device if it is reset to factory settings without your 
    permission. For example, if your device is lost or stolen 
    and a factory data reset is performed, only someone 
    with your Google Account username and password can 
    use the device.
    You will not be able to access the device after a factory 
    data reset if you do not have your Google Account 
    username and password. For more information, see 
    “Factory Data Reset” on page 178.
    Caution : Before shipping your device back to Samsung 
    or taking it to your nearest Samsung‑authorized service 
    center, you should remove your Google Account before 
    resetting the device back to factory settings. For more 
    information, visit  samsung.com/us/support/frp .
    Enable Factory Reset Protection
    Adding a Google Account to your device automatically 
    activates the FRP security feature.
    Disable Factory Reset Protection
    To disable FRP, remove all Google Accounts from the 
    device.
    1. From a Home screen, swipe up to access Apps .
    2. Tap  Settings > Accounts  > Google .
    3. Tap  More options > Remove account .  
    						
    							Set Up Your Device12
    Samsung Account
    Create a Samsung account for access to Samsung 
    content and apps on your device. 
    To set up a Samsung account on your device, use 
    Accounts settings.
    1. From a Home screen, swipe up to access Apps.
    2. Tap  Settings > Accounts .
    3. Tap  Add account >  Samsung account .
    Add an Email Account
    Use the Email app to view and manage all your email 
    accounts in one app. 
    To set up an email account on your device, use Accounts 
    settings. 
    1. From a Home screen, swipe up to access Apps .
    2. Tap  Settings > Accounts .
    3. Tap  Add account >  Email.
    Transfer Data from Your Old Device
    Use Smart Switch™ to transfer contacts, photos, and 
    other content from your old device. You can also use 
    the included On‑the‑Go adapter to copy content quickly 
    and easily from your old device, without installing the 
    Smart Switch app.
    Old Device New Galaxy 
    Note : The USB option must be set to Media device 
    (MTP) on the other device. Transferring content with 
    a USB cable may increase battery consumption. Make 
    sure your battery is fully charged.  
    						
    All Samsung manuals Comments (9)

    Related Manuals for Samsung Galaxy Note 8 User Manual