Samsung Ds 616 General Description Manual

INVESTIGATE
This feature allows selected stations with a special class of service to investigate
any call in progress. If CID information is available for an incoming call, you will
know to whom this station user is speaking. On outgoing calls, you can see who
was called. After investigating, you may barge-in on the conversation, disconnect
the call or hang up.
ABANDON CALL LIST (100)
The system has a system-wide abandon call list that stores CID information for the
last 100 calls that rang but were not...

FORWARD DND
This feature works with the Do Not Disturb feature. This allows calls directed to a
station in Do Not Disturb or One Time Do Not Disturb to forward immediately to
another destination.
NO ANSWER
This feature forwards calls that are not answered within a preprogrammed time.
The user can originate calls as usual and receive calls if present. The timer is pro-
grammable on a per-station basis to allow for differences in individual work habits.
BUSY/NO ANSWER
This feature allows the station user...

for the user to proceed to that station or allows the party that the call was intended
for to have that call placed at their station. The call or trunk button will flash at the
remote hold station.
CALL PARK AND PAGE
Each C.O. line has its own park zone. This simple method eliminates confusion
and ensures that a park zone is always available. Pressing the PAGE key parks the
call automatically. There are no extra buttons to press and there is no lost time
looking for a free zone.
CALL PICKUP
DIRECTED
With...

COMMON BELL CONTROL
The system is equipped with one programmable relay. This relay provides a dry
contact pair to control a customer-provided bell or common audible device. This
contact must be programmed as a member of a station group and may provide
steady or interrupted closure.
CONFERENCE
The system allows six simultaneous conferences.
ADD-ON (5 PARTY)
Any combination of up to five parties (stations or outside lines) can be joined to-
gether in an add-on conference. Parties may be eliminated or added...

be active in day mode, night mode or both. The C.O. lines used for DISA must have
disconnect supervision.
DIRECT TRUNK SELECTION
Each station can be allowed access to or denied access from a trunk or trunk group
by access code when LCR is activated. When restricted, the station user must use
a trunk key or a route key.
DIRECTORY NAMES
Each station, station group and C.O. line may be assigned a directory name (maxi-
mum 11 characters). In addition, each personal speed dial number, system speed
dial number...

4.10
EXECUTIVE BARGE-IN (OVERRIDE)
The feature allows specially programmed stations with a barge-in key to override
the automatic privacy of another station or outside trunk. Programming allows barge-
in with or without a warning tone. Stations may also be programmed as “secure”
so that they cannot be barged-in on.
WITH WARNING TONE
When the barge-in with tone option is set, the barging-in keyset has its microphone
on and the barged-in on station receives an override display. A double burst of
warning...

4.11
FAX COMPATIBILITY
By connecting the facsimile machine to any single line station port, there is no
need for a dedicated FAX line. Incoming calls can be manually transferred to the
facsimile machine. Any line in the system may be selected to send a FAX.
FLASH KEY OPERATION
While a user is on an outside line, pressing the FLASH key will flash the central office or
PBX. This is used for custom calling features on C.O. lines or in conjunction with
CENTREX/PBX operation. System programming allows...

INCOMING CALL DISTRIBUTION
Incoming calls can be assigned to ring a distributed station hunt group. This al-
lows all members of the group to share the call load.
INCOMING/OUTGOING SERVICE
Outside lines are available for incoming or outgoing service. Programming allows
any outside line to be used for incoming calls only, outgoing calls only or both way
service.
INDIVIDUAL LINE CONTROL
Each station in the system can be individually programmed to allow or deny dial-
ing out as well as allow or deny...

MEET ME PAGE AND ANSWER
After a user makes a Meet Me Page, the user may remain off-hook to allow the
paged party to meet the user for a private conversation.
MESSAGE WAITING INDICATIONS
When calling a station and receiving a busy signal or the no answer condition, the
caller can leave an indication that a message is waiting. The message button will
flash red at the messaged keyset. A single line phone will receive a distinctive
message waiting dial tone. Five message waiting indications can be left at...

OUTGOING CALL RESTRICTION
Selected stations may be restricted from placing outside calls. They can, however,
receive calls.
OVERFLOW
OPERATOR
When calls ringing a operator group go unanswered, they can overflow to another
destination after a programmed period of time. The operator group has its own
timer. The overflow destination can be a station or station group.
STATION GROUP
When calls ringing a station group go unanswered, they can overflow to another
destination after a programmed period of time....