Samsung DLPTV HL-P5085W HL-P5685W User Manual

English - 31
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.). A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear next to the channel
number.
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
Press the 
…or †button to
select “Name”, then press
the ENTER button.
2
Press the …or...

Picture Control
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”
and “Tint” according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.)
Operation
English - 32
Customizing the Picture
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the ENTER button to
select “Mode”.
3
Press the …or †button to
select a particular item, then
press the ENTER button.
Press the...

Using Automatic Picture Settings
Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”)
that are preset at the factory. You can activate either “Dynamic”, “Standard” or
“Cinema” by pressing the P.MODE button (or by making a selection from the
menu). Or, you can select “Custom” which automatically recalls your
personalized picture settings.
1
Press the MENU button. 
Press the 
…or †button to select
“Picture”, then press the ENTER button.
2
Press the ENTER button to select “Mode”.
3...

Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
English - 34
Operation
Adjusting the Volume
Press the VOL+ or VOL– buttons to increase or decrease the
volume.
Using the MUTE Button
At any time, you can temporarily
cut off the sound.
Press the MUTE button on the
remote control.
The message “Mute” is displayed
and the sound cuts off.
To turn mute off, press the MUTE
button again or, press either the
VOL+ or VOL–button.
Customizing the Sound
The...

3
Press the œor √button to select a
particular item to be changed.
Press the 
…or †button to increase or
decrease the selected frequency.
Press the EXIT button to exit.
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”) that are
preset at the factory. You can activate these sound settings by pressing the S.MODE button (or by
making a selection from the menu), or you can select “Custom”, which automatically recalls your
personalized sound...

Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can
check the time while watching the TV. (Just press the INFO button.)
Operation
English - 36
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button. 
Press the 
…or †button to
select “Time”, then press the
ENTER button. 
2
Press the ENTER button to
select “Clock Set”.
3
Press the œor √button to
move to “Hour”, “Min” or
“am/pm”.
Set the clock you want...

Setting the Timers
This TV can be set to turn on or off automatically at specific times that you
choose. Before using the timers, you must set the TV’s clock, as described
previously.
Setting the On/Off Timer
1
Press the MENU button. 
Press the 
…or †button to select “Setup”,
then press the ENTER button.
2
Press the …or †button to select “Time”,
then press the ENTER button.
Press the 
…or †button to select “On
Timer”, then press the ENTER button.
3
Press the …or †button to adjust “Hour”,
then press the...

Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
English - 38
Operation
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
2
Press the …or †button to
select “Time”, then press the
ENTER button.
Press the 
…or †button to
select “Sleep Timer”, then
press the ENTER button.
3
Press the …or †button to
select the preset time you
want, then press the ENTER
button.
Press the EXIT button to exit....

English - 39
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top box and the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select “Input”.
2
Press the ENTER button to
select “Source List”.
Press the 
…or †button to
select a signal source, then
press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the SOURCE button on the
remote...

Assigning Names to External Input Mode
This feature enables you to name the input source you have connected.
Operation
English - 40
1
Press the MENU button.
Press the ENTER button to
select “Input”.
2
Press the …or †button to
to select “Edit Name”, then
press the ENTER button.
3
Press the …or †button to
select a signal source, then
press the ENTER button.
Press the 
…or †button to
select an external device,
then press the ENTER button.
Press the EXIT button to exit.
Input
Source List : TV√Edit Name√...