Samsung DLPTV HL-P5085W HL-P5685W User Manual

English - 21
Connecting to R,G,B
1
Connect a set of audio
cables between the PC
AUDIO (L,R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
2
Connect a R,G,B video
cable between the PC IN
jack on the TV and the
R.G.B OUT jack on the Set-
Top Box.
Connecting to HDMI (High Definition Multimedia Interface)
1
Connect a HDMI cable
between the HDMI IN jack
on the TV and the HDMI OUT
jack on the Set-Top Box.
NOTE
•Please check if the HDMI
sources power is on, in case
that you fail to select HDMI...

SAMSUNG
BP68-00352A-00(22~43)  6/18/04  4:38 PM  Page 22 

Operation
BP68-00352A-00(22~43)  6/18/04  4:38 PM  Page 23 

Viewing the Menus
1
Press the MENU button.
The main menu is displayed.
There are five menu groups:
“Input”, “Picture”, “Sound”,
“Channel” and “Setup”.
2
Press the …or †button to
select an item you want in
the menu. 
Press the 
œ, √or ENTER
button to display, change, or
use the selected items.
Use the ENTER button to
enter items in the menu.
3
Press the EXIT button to exit.
Viewing the Display
Press the INFO button on the
remote control. 
The TV displays the current
channel, the status of certain
picture...

English - 25
Selecting the Menu Language
Choose a language for the on-screen menus: English, Spanish or French.
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
2
Press the ENTER button to
select “Language”.
Press the 
…or †button to
select the appropriate
language, then press the
ENTER button.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound...

Operation
English - 26
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and
cable channels. After the available channels are memorized, use the CH and CH buttons to
scan through the channels. This eliminates the need to change channels by entering the channel
digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing
the channels (automatic) and adding/deleting channels (manual).
1
Press the MENU...

Storing Channels in Memory (Automatic Method)
First, select the correct signal source (“Air”, “STD”, “HRC” or “IRC”) as
described on the previous page.
1
Press the MENU button.
Press the 
…or †button to select
“Channel”, then press the ENTER button.
2
Press the …or †button to select “Auto
Program”, then press the ENTER button.
Press the ENTER button to start the auto
program.
The TV begins memorizing all of the
available stations.
Press the ENTER button at any time to
interrupt the memorization process....

Changing Channels
You can change channels on your TV by using the CH and CH buttons, or by direct
selection using the number buttons. You can use the number buttons to tune to any channel (even
one that has been erased or has not been memorized). 
English - 28
Operation
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes
channels in sequence. You will see all the channels that the TV has
memorized. (The TV must have memorized at least...

Selecting Your Favorite Channels
You can store your favorite channels for each available input source (such as TV and CATV). 
This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH
button on the remote control.
English - 29
To Store Your Favorite Channels:
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Favorite Channels”,
then press the ENTER button.
Press the 
…or † button to...

Scanning the Channels
The TV automatically scans all of the channels it has memorized. 
Operation
English - 30
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Scan”, then press the
ENTER button.
The TV scans all of the
channels memorized through
the sub(PIP) picture.
Press the EXIT button to exit.
NOTE
•
When the “ANT 2 IN” mode is selected, the channel scan
function works on the main picture only.
Air      3
Air      4...