Samsung DLPTV HL-P5085W HL-P5685W User Manual
Have a look at the manual Samsung DLPTV HL-P5085W HL-P5685W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 31 Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.). A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear next to the channel number. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. Press the …or †button to select “Name”, then press the ENTER button. 2 Press the …or †button to move to the channel to be labelled, then press the ENTER button. Press the …or †button to select a letter, a number or a blank. (Results in this sequence: A...Z, ✽, blank, 0...9, -). 3 Press the √button to switch to the next field, which will be selected. Select a second letter or digit pressing …or †button, as above. Repeat the process to select the last two digits. When you have finished, press the ENTER button. To erase the assigned label, select “Clear” by pressing the …/†/œ/√button, then press the ENTER button. Press the EXIT button to exit. Channel Antenna : Ant.1√Air/CATV : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√ More MoveEnterReturn Input Picture Sound Channel Setup NOTE •If you add or delete the TV channel, the labeled channels list will also be added or deleted. Name MoveAdjustReturn Input Picture Sound Channel SetupClearClearClearClearClear Air 2A Air 3----Air 4----Air 5----Air 6---- Name MoveEnterReturn Input Picture Sound Channel SetupClearClearClearClearClear Air 2CNN2 Air 3----Air 4----Air 5----Air 6---- BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 31
Picture Control You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color” and “Tint” according to personal preference. (Alternatively, you can use one of the automatic settings. See next page.) Operation English - 32 Customizing the Picture 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the …or †button to select a particular item, then press the ENTER button. Press the œor √button to increase or decrease the value of a particular item. Resetting the Picture Settings to the Factory Defaults You can return to the factory default picture settings. 4 Press the MENU button to display the “Mode” menu. Press the …or †button to select “Reset”, then press the ENTER button. The previously adjusted picture settings will be reset to the factory defaults. Press the EXIT button to exit. Contrast90 Picture Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 50 Color 60 Tint G 50 R 50 Reset MoveEnterReturn Input Picture Sound Channel Setup NOTE •“Tint” doesn’t operate in PC, DVI, HDMI or 480p-Component or higher modes. Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 50 Color 60 Tint G 50 R 50 Reset MoveEnterReturn Input Picture Sound Channel Setup BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 32
Using Automatic Picture Settings Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”) that are preset at the factory. You can activate either “Dynamic”, “Standard” or “Cinema” by pressing the P.MODE button (or by making a selection from the menu). Or, you can select “Custom” which automatically recalls your personalized picture settings. 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ENTER button again to select “Mode”. Press the …or †button to select a particular item, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the P.MODE button on the remote control repeatedly to select one of the standard picture settings. •Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. •Choose “Standard” for the standard factory settings. •Choose “Cinema” when viewing a movie. English - 33 Standard Picture Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 50 Color 60 Tint G 50 R 50 Reset MoveEnterReturn Input Picture Sound Channel Setup Mode Mode: Standard Contrast 90 Brightness 50 Sharpness 50 Color 60 Tint G 50 R 50 Reset MoveEnterReturn Input Picture Sound Channel SetupDynamic Standard Cinema BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 33
Sound Control You can control and customize the sound levels and settings of the TV with the remote control. English - 34 Operation Adjusting the Volume Press the VOL+ or VOL– buttons to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound. Press the MUTE button on the remote control. The message “Mute” is displayed and the sound cuts off. To turn mute off, press the MUTE button again or, press either the VOL+ or VOL–button. Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the automatic settings. See next page.) 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the …or †button to select “Equalizer”, then press the ENTER button. Continued... Mute Sound Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√ MoveEnterReturn Input Picture Sound Channel Setup Sound Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√ MoveEnterReturn Input Picture Sound Channel Setup BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 34
3 Press the œor √button to select a particular item to be changed. Press the …or †button to increase or decrease the selected frequency. Press the EXIT button to exit. Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”) that are preset at the factory. You can activate these sound settings by pressing the S.MODE button (or by making a selection from the menu), or you can select “Custom”, which automatically recalls your personalized sound settings. 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. Press the …or †button to select a particular item, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the S.MODE button on the remote control repeatedly to select one of the standard sound settings. •Choose “Standard” for the standard factory settings. •Choose “Music” when watching music videos or concerts. •Choose “Movie” when watching movies. •Choose “Speech” when watching a show that is mostly dialog (i.e., news). •Choose “Custom” to recall your personalized settings. English - 35 Standard Equalizer MoveAdjustReturn Input Picture Sound Channel Setup Balance 100Hz 300Hz 1KHz 3KHz 10KHz R L+ 0 -+ 0 - Sound Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√ MoveEnterReturn Input Picture Sound Channel Setup Sound Mode: Standard Equalizer SRS TSXT : Off MTS : Stereo Auto Volume : Off Internal Mute : Off MoveEnterReturn Input Picture Sound Channel SetupStandard Music Movie Speech Custom BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 35
Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Operation English - 36 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. Press the …or †button to select “Time”, then press the ENTER button. 2 Press the ENTER button to select “Clock Set”. 3 Press the œor √button to move to “Hour”, “Min” or “am/pm”. Set the clock you want by pressing the …or †button, then press the ENTER button. Press the EXIT button to exit. NOTE •The current time will appear every time you press the INFO button. Setup Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√ MoveEnterReturn Input Picture Sound Channel Setup Time Clock Set - - : - - am√Sleep Timer Off√On Timer Off√Off Timer Off√ MoveEnterReturn Input Picture Sound Channel Setup Clock Set MoveAdjustReturn Input Picture Sound Channel Setup Hour Min am/pm 12 0 0 am Auto Power Off Auto Power OFF will automatically turn the TV off if you do not operate any controls within 3 hours after the TV is turned on by the timer. This function is available in the timer “On” mode only and will prevent a leakage accident or overheating caused by your TV being left on too long. BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 36
Setting the Timers This TV can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the TV’s clock, as described previously. Setting the On/Off Timer 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the …or †button to select “On Timer”, then press the ENTER button. 3 Press the …or †button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. When finished, press the MENU button to return. 4 Press the …or †button to select “Off Timer”, then press the ENTER button. 5 Press the …or †button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. Press the EXIT button to exit. English - 37 Setup Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√ MoveEnterReturn Input Picture Sound Channel Setup Time Clock Set 10 : 30 am√Sleep Timer Off√On Timer Off√Off Timer Off√ MoveEnterReturn Input Picture Sound Channel Setup On Timer MoveAdjustReturn Input Picture Sound Channel SetupHour Min am/pm 12 0 0 am Ch Vol.Activation 03 10 No Time Clock Set 10 : 30 am√Sleep Timer Off√On Timer 06 : 30 am√Off Timer Off√ MoveEnterReturn Input Picture Sound Channel Setup Off Timer MoveAdjustReturn Input Picture Sound Channel SetupHour Min am/pm 12 0 0 am Activation No BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 37
Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). English - 38 Operation 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the …or †button to select “Sleep Timer”, then press the ENTER button. 3 Press the …or †button to select the preset time you want, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from “30 Min.” to “180 Min.”). NOTE •If no signal is received for 15 minutes, the TV will be automatically turned off. Setup Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√ MoveEnterReturn Input Picture Sound Channel Setup Time Clock Set 10 : 30 am√Sleep Timer Off√On Timer 06 : 30 am√Off Timer 11 : 30 pm√ MoveEnterReturn Input Picture Sound Channel Setup Time Clock Set 10 : 30 am Sleep Timer Off On Timer 06 : 30 am Off Timer 11 : 30 pm MoveEnterReturn Input Picture Sound Channel SetupOff 30 60 90 120 150 180 30 Min. BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 38
English - 39 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top box and the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ENTER button to select “Source List”. Press the …or †button to select a signal source, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the SOURCE button on the remote control repeatedly to select an external signal source. Input Source List : TV√Edit Name√ MoveEnterReturn Input Picture Sound Channel Setup Source List TV AV1 : - - - - AV2 : - - - - S-Video1 : - - - - S-Video2 : - - - - Component1 : - - - - Component2 : - - - - More MoveEnterReturn Input Picture Sound Channel Setup AV 1 BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 39
Assigning Names to External Input Mode This feature enables you to name the input source you have connected. Operation English - 40 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the …or †button to to select “Edit Name”, then press the ENTER button. 3 Press the …or †button to select a signal source, then press the ENTER button. Press the …or †button to select an external device, then press the ENTER button. Press the EXIT button to exit. Input Source List : TV√Edit Name√ MoveEnterReturn Input Picture Sound Channel Setup Input Source List : TV√Edit Name√ MoveEnterReturn Input Picture Sound Channel Setup Edit Name AV 1: - - - - AV2 : - - - - S-Video1 : - - - - S-Video2 : - - - - Component1 : - - - - Component2 : - - - - PC : - - - - More MoveEnterReturn Input Picture Sound Channel Setup- - - - VCR DVD Cable STB HD STBSatellite STBAV Receiver BP68-00352A-00(22~43) 6/18/04 4:38 PM Page 40