Samsung DLPTV HL-P5085W HL-P5685W User Manual

							Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune
again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of
screen.
English - 81
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Coarse” or “Fine”,
then press the ENTER button.
5
Press the œor √button to
remove the picture noise.
Press the EXIT button to exit.
NOTE
•This feature may change the width of the image. If necessary,
adjust the position to center.
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Coarse1344
PC
Coarse√Fine√Position√Auto Adjustment
Recall
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Fine0
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 81 
						

							Changing the Picture Position
After connecting the TV to your PC, adjust the position of picture if it is not well-aligned.
English - 82
PC Display
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Position”, then press
the ENTER button.
5
Adjust the position of the
picture by pressing the
…/†/œ/√button.
Press the EXIT button to exit.
NOTE
•If the PC signal is input as “DVI” or “HDMI”, the picture quality
and position cannot be adjusted.
PC
Coarse√Fine√Position√Auto Adjustment
Recall
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Position
MoveEnterReturn
Input
Picture
Sound
Channel
Setup


BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 82 
						

							English - 83
Adjusting the Picture Quality and Position Automatically
This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse
and position are adjusted automatically.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Auto Adjustment”,
then press the ENTER button.
The picture quality and
position are automatically
adjusted, and the picture
returns to normal a few
seconds later.
Press the EXIT button to exit.
Auto in Progress
Please Wait
PC
Coarse√Fine√Position√Auto Adjustment
Recall
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 83 
						

							Initializing the Picture Settings
You can replace all picture settings with the factory default values.
English - 84
PC Display
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Recall”, then press
the ENTER button.
The picture settings are
replaced with the factory
default values.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
PC
Coarse√Fine√Position√Auto Adjustment
Recall
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 84 
						

							English - 85
Changing the Picture Size (PC Mode)
You can select the picture size which best corresponds to your viewing requirements.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
Press the 
…or †button to
select “Size”, then press the
ENTER button.
3
Press the œor √button to
select the screen format you
want, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method
Press the P.SIZE button on the remote control repeatedly to select
one of the picture size settings.
•“Wide TV”: Scales the picture to the size of the TV screen,
regardless of the aspect ratio of the input source.
•“Wide PC”: Scales the picture to 92% of the TV screen,
regardless of the aspect ratio of the input source. The picture
position (     ,      ) and size (     ) adjustment are available by
pressing the 
…/†/œ/√button.
•“Expand”: Scales the picture to the aspect ratio of the input
source.
•“4:3”: Displays the picture as it is without changing the aspect
ratio of input source.NOTES
•The “Wide PC” and
“Expand” modes are
recommended for the PC
mode.
•In VGA (640x480) and
SVGA (800x600) modes,
the “Wide” and “4:3”
modes are available.
•In XGA (1024x768)
mode, the “Wide” mode
is available.
Picture
Mode : Standard√Color Tone :  Warm1√Size : Wide  PC√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Picture Size
Wide TV ➝ 4:3
Wide TV 
➝ Wide PC ➝ Expand➝ 4:3
Wide TV 
➝ Wide PC ➝ Expand
Wide TV 
➝ 4:3
Wide TV 
➝ Wide PC ➝ Expand➝ 4:3
Source (PC/DVI)
1920 x 1080i
1280 x 720
1024 x 768
720 x 483 (480p)
Others
Size
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Wide TVWide PCExpend 4:3
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 85 
						

							SAMSUNG
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 86 
						

							Appendix
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 87 
						

							Troubleshooting 
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of
these troubleshooting tips apply, then call your nearest Samsung authorized service center.
English - 88
Appendix
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Make sure the MUTE button is off.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the program is broadcasted in color.
Adjust the picture settings.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
Unplug the TV for 30 seconds, then try operating it
again.
Press the MODE button to put your remote control
into TV mode.
Make sure the remote has batteries.
Make sure the wall outlet is working.
Make sure the remote has batteries.
•The display panel used for the DLP Projection TV is composed of many tiny pixels.
These pixels may occasionally appear on the screen, but it is not a defect of the unit.
Problem
Poor picture quality.
Poor sound quality.
No picture or sound.
No color, wrong colors or tints.
Picture rolls vertically.
The TV operates erratically.
Your remote control does not
operate your TV.
The TV won’t switch on.
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 88 
						

							Replacing the Lamp
• Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For the best screen quality it needs to
be replaced periodically. After replacing the lamp, the screen quality will be bright and clear
as new.
•Check before lamp replacement 
1. The lamp must be the same code number and type. 
2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 
3. After checking the code number for the lamp, give the code number to the store where you
purchased the TV or to a Samsung Service center. 
•Caution
1. Replace with the correct code numbered lamp to avoid damage to the TV. 
2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object
inside the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children. 
English - 89
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 89 
						

							English - 90
Appendix
• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws. 
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
1
Unplug TV, then remove the 7
screws.
2
Remove the rear cover.
3
Remove the 2 press-pin
screws the Lamp.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.
BP68-00352A-00(78~91)  6/18/04  4:29 PM  Page 90