Samsung DLP TV HL-S5087W User Manual

English - 51
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear.
1Press the MENU button.
Press the œor √button to select
“Channel”, then press the ENTER
button.
2Press the …or †button to select
“Channel Manager”, then press the
ENTER button.
Press the …or †button to select...

English - 52
Channel Control
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button. 
Press the œor √button to select
“Channel”, then press the ENTER 
button. 
2
Press the …or †button to select
“Fine Tune”, then press the ENTER
button.
3
Press the †button. Press theœor √
button to adjust the fine tuning.
To store the fine tuning setting in the
TV’s memory, press the ENTER button. 
4
To reset the fine tuning setting, press
the...

English - 53
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) 
channels have either perfect reception quality or you will not receive them at all. So, unlike analog 
channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENU button. 
Press the œor √button to select
“Channel”, then press the ENTER 
button. 
2
Press the...

English - 54
Channel Control
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button. 
Press the œor √button to select
“Channel”, then press the ENTER 
button. 
2
Press the …or †button to select
“LNA”, then press the ENTER button.
3
Press the …or †button to select
“Off” or “On”, then press the ENTER
button.
Select “Return” by pressing the 
…or † button, then...

Picture Control
BP68-00588A-00Eng(028~055)  3/8/06  5:04 PM  Page 55 

Picture Control
English - 56
Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
Changing the Picture Standard
1
Press the MENU button. 
Press the œor √button to select
“Picture”, then press the ENTER 
button.
2
Press the …or †button to select
“Mode”, then press the ENTER 
button.
Press the …or †button again to
select (Picture) “Mode”, then press
the ENTER button.
3
Press the …or †button to select the
desired picture mode (Dynamic,
Standard, Movie,...

1
Press the MENU button. 
Press the œor √button to select
“Picture”, then press the ENTER 
button.
2
Press the …or †button to select
“Mode”, then press the ENTER 
button.
Press the …or †button again to
select (Picture) “Mode”, then press
the ENTER button.
3
Press the …or †button to select the
desired picture mode (Dynamic,
Standard, Movie, Custom), then
press the ENTER button.     
4
Press the …or †button to select 
a particular option(Contrast,
Brightness, Sharpness, Color, or
Tint), then press the...

Picture Control
English - 58
5
Press the ENTER button to return to “Mode”.
Press the …or †button to select “Color Tone”, then press the 
ENTER button.
6
Press the …or †button to select a particular item (Cool2, Cool1,
Normal, Warm1, or Warm2), then press the ENTER button.
Select “Return” by pressing the …or † button, then press the ENTER
button to return to the previous menu.
7
To return the factory defaults, select “Reset” by pressing the …or †
button. Press the ENTER button.
Press the …or †button to...

English - 59
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1
Press the MENU button. 
Press the œor √button to select
“Picture”, then press the ENTER 
button.
Press the …or †button to select
“Size”, then press the ENTER button.
2
Press the …or †button to select the
screen format you want, then press
the ENTER button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT...

Picture Control
English - 60
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction 
feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button. 
Press the œor √button to select
“Picture”, then press the ENTER 
button.
2
Press the …or †button to select
“Digital NR”, then press the ENTER
button.
3
Press the …or †button to select
“Off” or “On”, then press the ENTER
button.
Select “Return” by...