Samsung DLP TV HL-S5087W User Manual
Have a look at the manual Samsung DLP TV HL-S5087W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 51 Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear. 1Press the MENU button. Press the œor √button to select “Channel”, then press the ENTER button. 2Press the …or †button to select “Channel Manager”, then press the ENTER button. Press the …or †button to select “All”, then press the ENTER button. 3Press the …/†/œ/√ button to select a channel, then press the ENTER button and option window will appear. Press the …or †button to select “Name”, then press the ENTER button. 4Press the …or †button to select a letter, a number or a blank. (Results in this sequence: A...Z, 0...9, +, -, ✽, /, blank). 5 Press the œor √button to switch to the next field, which will be selected. Select a second letter or digit by pressing …or † button, as above. Repeat the process to select the last three digits. To erase the assigned new name, press and hold the …or † button until a blank appears. When you have finished, press the MENU button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. NOTE •If you add or delete a TV channel, the channel label (if set) will also be added or deleted. Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune Signal Strength LNAAir OnReturn All Channel List Air 2 List Mode Delete All 2 5 8 11 14 17 20 21 4 7 10 13 16 19 22 Watch Add Delete Name Favorite Return Added All Channel List Air 2 List Mode Delete All 2 5 8 11 14 17 20C 21 4 7 10 13 16 19 22 EnterAdjustReturn EnterReturn All Channel List Air 2 List Mode Delete All 2 5 8 11 14 17 20A 21 4 7 10 13 16 19 22 Watch Add Delete Name Favorite Return Added ▲ ▼ EnterAdjustReturn Watch Add Delete Name Favorite Return Added NN0 2▲ ▼ Channel All Added Favorite Default List Mode All Return Channel Enter BP68-00588A-00Eng(028~055) 3/13/06 2:28 PM Page 51
English - 52 Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the œor √button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Fine Tune”, then press the ENTER button. 3 Press the †button. Press theœor √ button to adjust the fine tuning. To store the fine tuning setting in the TV’s memory, press the ENTER button. 4 To reset the fine tuning setting, press the †button to select “Reset”, then press the ENTER button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. NOTES •Only analog TV channels can be fine tuned. •“ *” will appear next to the name of fine-tuned channels. Analog Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune √Signal Strength LNA Air OnReturn Channel Enter Fine Tune Air 7 0 Reset OK Return Moventer +3 Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune Signal Strength LNAAir OnReturn Channel Enter Fine Tune Air 7 * +3 Reset OK Return Move BP68-00588A-00Eng(028~055) 3/8/06 5:03 PM Page 52
English - 53 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENU button. Press the œor √button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Signal Strength”, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. Digital Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune Signal Strength √LNA Air OnReturn Channel Enter Signal StrengthReturn Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune Signal Strength LNAAir OnReturn BP68-00588A-00Eng(028~055) 3/8/06 5:04 PM Page 53
English - 54 Channel Control LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the œor √button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “LNA”, then press the ENTER button. 3 Press the …or †button to select “Off” or “On”, then press the ENTER button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. NOTES •LNA functions only when antenna is set to Air. The LNA setting must be made separately for each channel. •If the picture is noisy with the LNA set to On, select Off. Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune Signal Strength LNAAir OnReturn Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune Signal Strength LNAAirReturn Off On Channel Enter Channel Antenna Auto Program Channel Manager Fine Tune Signal Strength LNAAir OnReturn BP68-00588A-00Eng(028~055) 3/8/06 5:04 PM Page 54
Picture Control BP68-00588A-00Eng(028~055) 3/8/06 5:04 PM Page 55
Picture Control English - 56 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard 1 Press the MENU button. Press the œor √button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “Mode”, then press the ENTER button. Press the …or †button again to select (Picture) “Mode”, then press the ENTER button. 3 Press the …or †button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. Alternate method Press the P.MODE button on the remote control repeatedly to select the desired picture mode. •Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. •Choose “Standard” for the standard factory settings. •Choose “Movie” when viewing the movie. •Choose “Custom” if you want to adjust the settings according to personal preference (see “Customizing the Picture Settings”, page 57). Picture Enter Mode Mode Contrast80Brightness50Sharpness50Color50TintG50 R50Color Tone Reset ReturnStandard Cool1OK Picture Enter Mode Mode Contrast80Brightness50Sharpness50Color50TintG50 R50Color Tone Reset ReturnStandard Cool1OK Dynamic Standard Movie Custom Picture Enter Picture Mode Size Digital NR DNIe My Color Control Film Mode16:9 On On Off Return Standard BP68-00588A-00Eng(056~069) 3/8/06 5:04 PM Page 56
1 Press the MENU button. Press the œor √button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “Mode”, then press the ENTER button. Press the …or †button again to select (Picture) “Mode”, then press the ENTER button. 3 Press the …or †button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. 4 Press the …or †button to select a particular option(Contrast, Brightness, Sharpness, Color, or Tint), then press the ENTER button. Press the œor √button to decrease or increase the value of a particular item. Continued... English - 57 Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings. •While adjusting a picture option, you can also select another option (Contrast, Brightness, Sharpness, Color, or Tint) by pressing the …or †button. NOTES •“Tint” doesn’t operate in HDMI, PC or Component modes. •The Tint cannot be adjusted while watching Digital TV. •In PC mode, the Contrast and Brightness can be selected. ▲Contrast▼100 Mode Picture Enter Mode Mode Contrast80Brightness50Sharpness50Color50TintG50 R50Color Tone Reset ReturnStandard Cool1OK Picture Enter Mode Mode Contrast100√Brightness45Sharpness75Color55TintG50 R50Color Tone Reset ReturnDynamic Cool1OK Picture Enter Mode Mode Contrast80Brightness50Sharpness50Color50TintG50 R50Color Tone Reset ReturnStandard Cool1OK Dynamic Standard Movie Custom Adjust Picture Enter Picture Mode Size Digital NR DNIe My Color Control Film Mode16:9 On On Off Return BP68-00588A-00Eng(056~069) 3/13/06 10:26 AM Page 57
Picture Control English - 58 5 Press the ENTER button to return to “Mode”. Press the …or †button to select “Color Tone”, then press the ENTER button. 6 Press the …or †button to select a particular item (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. 7 To return the factory defaults, select “Reset” by pressing the …or † button. Press the ENTER button. Press the …or †button to select “OK” or “Cancel”, then press the ENTER button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. NOTE •The reset function must be set separately for each mode (Dynamic, Standard, Movie, or Custom).•If you set “Reset” to “OK”, the previously adjusted settings will be reset to the factory defaults. Resetting the Picture Settings to the Factory Defaults Picture Enter Mode Mode Contrast100Brightness45Sharpness75Color55TintG50 R50Color Tone Reset ReturnDynamic Cool1OK Picture Enter Mode Mode Contrast100Brightness45Sharpness75Color55TintG50 R50Color Tone Reset ReturnDynamic Cool1OK Picture Enter Mode Mode Contrast100Brightness45Sharpness75Color55TintG50 R50Color Tone Reset ReturnDynamic Cool1OK Cool2 Cool1 Normal Warm1 Warm2 BP68-00588A-00Eng(056~069) 3/8/06 5:04 PM Page 58
English - 59 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the œor √button to select “Picture”, then press the ENTER button. Press the …or †button to select “Size”, then press the ENTER button. 2 Press the …or †button to select the screen format you want, then press the ENTER button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. Alternate method Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. •“16:9”: Sets the picture to 16:9 wide mode. •“Zoom1”: Magnifies the size of the picture on screen. Press the …or †button to move the picture. •“Zoom2”: Magnifies the size of the picture more than “Zoom1”. •“Wide Fit”: Enlarges the aspect ratio of the picture to fit the entire screen. •“4:3”: Sets the picture to 4:3 normal mode. NOTES •You can select the 16:9, 4:3 and Wide Fit screen sizes in the DTV or Component (720p, 1080i) mode. •For Zoom1, Zoom2, and Wide Fit (DTV’s HD signal only), you can adjust the vertical position using the …or†button after pressing the P.SIZE button on the remote control. •When watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom(Wide Fit) sets the optical picture format by expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not support all external devices. Picture Enter Picture Mode Size Digital NR DNIe My Color Control Film Mode4:3 On Off Off Return16:9 Zoom1 Zoom2 Wide Fit 4:3 Picture Enter Picture Mode Size Digital NR DNIe My Color Control Film Mode16:9 On On Off Return Zoom1 Move▲ ▼ Wide Fit4 : 3 BP68-00588A-00Eng(056~069) 3/8/06 5:04 PM Page 59
Picture Control English - 60 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the œor √button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “Digital NR”, then press the ENTER button. 3 Press the …or †button to select “Off” or “On”, then press the ENTER button. Select “Return” by pressing the …or † button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit. Picture Enter Picture Mode Size Digital NR DNIe My Color Control Film Mode16:9 On On Off Return Picture Enter Picture Mode Size Digital NR DNIe My Color Control Film Mode16:9 On Off Off Return Off On Picture Enter Picture Mode Size Digital NR DNIe My Color Control Film Mode16:9 On On Off Return BP68-00588A-00Eng(056~069) 3/8/06 5:04 PM Page 60