Samsung DLP TV HL-S5087W User Manual

							English - 101
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Right click the mouse on the Windows Desktop, 
then click on Properties. The Display Dialog-Box 
will be displayed.
continued... 2Click on Settings, then set the Display Mode with
reference to the Display Modes Table. You do not
need to change the Colors settings.
3Click on Advanced. A new settings dialog box
will be displayed.
4Click on the Monitor tab, then set the Screen
Refresh Rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal
Frequency individually if you can do so, instead 
of setting the Screen Refresh Rate.
5Press the OK button, close the window, then 
press the OK button on the Display Registration
Information window. Automatic re-booting may
commence at this moment.
6Shutdown the PC, and connect it to your TV.
*The actual screens on your PC may look 
different, depending on your particular version 
of Windows and the type of your PC.
*When you use your TV as a PC monitor, 
it supports Colors up to 32 bits.
*In this case, the display on the TV may look 
different depending on your particular version 
of Windows or the PC manufacturer.
*When connecting a PC, you must set it to the 
display settings that are supported by the TV. 
Otherwise, the message “Out of input range”
will be displayed.
2
3
4
5
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 101 
						

							PC Display
English - 102
NOTES
•The Modes Table conforms to the regulations of IBM/VESA and is prepared based on analog input
standards.
•The optimal resolution is 1920 x 1080 @ 60Hz.
•The optimal timing per each mode is the Vertical Frequency 60Hz. 
•Resolutions other than the resolutions above are not supported in PC mode.
Resolution
640 x 350
640 x 480
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1600 x 1200
1920 x 1200RB
Vertical Frequency [Hz]
70.086
59.94
72.809
75
60.317
72.188
75
60.004
70.069
75.029
75
60
60.02
75.025
60
59.885Horizontal Frequency [KHz]
31.469
31.469
37.861
37.5
37.879
48.077
46.875
48.363
56.476
60.023
67.5
60
63.981
79.976
75
74.556Vertical Polarity
N
N
N
N
P
P
P
N
N
P
P
P
P
P
P
PHorizontal PolarityP
N
N
N
P
P
P
N
N
P
P
P
P
P
P
N
Mode
IBM
VESA
Checklist Before Connecting to a PC
•Adjust the PC Display Setup to the resolution and frequency values that are supported by the TV.
•Please read the user’s manual provided with the PC (Graphic Card & Sound Card).
•Do not supply power to either device until all connections are complete.
Supplying power in the middle of connecting may cause damage to the product.
•Check the terminal types for the PC’s graphic card.
Setting the Display Modes to be Compatible with Your TV
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 102 
						

							English - 103
Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen.
1Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Image Lock”, then press the ENTER
button.
5
Press the …or †button to select
“Coarse” or “Fine”, then press the
ENTER button.
6
Press the œor √button to remove
the picture noise.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•This feature may change
the width of the image.
If necessary, adjust the
position to center.
Setup
Enter
PC
Image Lock√Position
Auto Adjustment
Image Reset
Resolution
1024x 768 @75Hz
Return
Setup
Enter
Image Lock
Coarse 1312
Fine 0Return
Setup
Image Lock
Coarse 1312
Fine 0Return
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
Off
Medium
Off
On
Adjust
EnterAdjust
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 103 
						

							PC Display
English - 104
Changing the Picture Position
After connecting the TV to your PC, adjust the position of the picture if it is not well-aligned.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Position”, then press the ENTER 
button.
5
Adjust the position of picture
by pressing the …/†/œ/√
button. 
Press the ENTER button.
Select “Return” by pressing
the …or † button, then
press the ENTER button to 
return to the previous menu.
Press the EXIT button to exit.
Setup
Enter
PC
Image Lock
Position√Auto Adjustment
Image Reset
Resolution
1024x 768 @75Hz
Return
Position
AdjustEnterReturn
▼
▼
▲
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
▼
Setup
Enter
Setup…Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
Off
Medium
Off
On
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 104 
						

							1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Auto Adjustment”, then press the
ENTER button.
The picture quality and position are
automatically adjusted, and the
picture returns to original view
a few seconds later.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
English - 105
Adjusting the Picture Quality and Position Automatically
This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and
position are adjusted automatically.
Setup
Enter
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution
1024x 768 @75Hz
Return
Auto Adjustment in Progress
Please Wait.
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
Off
Medium
Off
On
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 105 
						

							PC Display
English - 106
Changing the Picture Size (PC Mode)
You can select the picture size which best corresponds to your viewing requirements.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button. 
Press the œor √button to select
“Picture”, then press the ENTER 
button.
Press the …or †button to select
“Size”, then press the ENTER button.
3
Press the …or †button to select the
screen format you want, then press
the ENTER button.
Select “Return” by pressing the …or † button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
Alternate method
Press the P.SIZE button on the
remote control repeatedly to
change the picture Size.
•“Wide”: The picture position 
(     ,     ) and size (     )
adjustment are available by
pressing the …/†/œ/√
button.
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film ModeWide
On
On
Off
Return
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film ModeWide
On
On
Off 
Return
Wide
4:3
Wide▲
▼
•“Wide”: Scales the picture to
92% of the TV screen, regardless
of the aspect ratio of the input
source. 
•“4:3”: Displays the picture as it
is without changing the aspect
ratio of input source.
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 106 
						

							English - 107
Viewing the Current Resolution
You can get the resolution information of your PC.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
The resolution information is
displayed on the screen.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•To change the resolution, see pages 101~102.
Setup
Enter
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution
1024x768 @75Hz
Return
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
Off
Medium
Off
On
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 107 
						

							PC Display
English - 108
Initializing the Picture Settings
You can replace all picture settings with the factory default values.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Image Reset”, then press the ENTER
button.
The picture settings are replaced with
the factory default values.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Setup
Enter
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution
1024x768 @75Hz
Return
Image Reset is completed.
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
Off
Medium
Off
On
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 108 
						

							WISELINK
BP68-00588A-00Eng(100~109)  3/3/06  10:58 AM  Page 109 
						

							WISELINK
English - 110
Using the WISELINK Function 
This function enables you to view and listen to photo (JPEG) and audio files (MP3)saved on a USB
Mass Storage Class (MSC) device.
Press the power button on the
remote control or front panel.
Connect a USB device containing
JPEG and/or MP3 files to the
WISELINK jack (USB jack) on the
side of the TV first.
TV Side Panel
NOTES
•If you enter the WISELINK mode with no USB device connected. “There is no device connected”
message will appear. In this case, insert the USB device, exit the screen by pressing the WISE LINK
button on the remote control and enter the WISELINK screen again.
•Photo and audio files must be named in English, French, or Spanish. If not, the files can not be
played. Change the file names to English, French, or Spanish if necessary.
•Folder or file names can not exceed 128 characters. If exceeded, they wont function.
•The file system only supports the FAT16/32.
•Cer
tain types of USB Digital camera and audio devices may not be compatiblewith this TV.
•Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class
Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers.
•Before connecting your device to the TV, please back up your files to prevent them from damage or
loss of data. SAMSUNG is not responsible to any data file damage or data loss.
Move the cursor and select an item
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Stop the current function and return to the previous high-level menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)Operations Button
Using the Remote Control Button in WISELINK Menu
Example
BP68-00588A-00Eng(110~127)  3/8/06  5:05 PM  Page 110