Samsung Digimax V4000 Users Manual

91
PLAY
Video
INFORMATION
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy,
Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.
Even if the [SOUND] function is [ON], the sound will not activate in this menu.
The Movie output signal from the camera can be NTSC or PAL. Your choice of...

92
Connecting to an external monitor
Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the
camera to an external monitor via the video cable. When the camera is connected to an external
monitor, the LCD monitor will be turned off automatically.
INFORMATION
When using a TV as an external monitor, you will need to select the external or AV channel
of the TV.
There will be a digital noise on the external monitor, but it is not a...

93
PLAY
Quick view
You can briefly review the last image captured during the pre-set time.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Press the DOWN button until the [Q. VIEW] menu is selected.
4. Press the RIGHT button and the cursor will shift to the [Q.VIEW]
sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
- [OFF] : The quick view function can’t be activated.
- [1 ~ 3...

94
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. 
Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. IMAGE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
IMAGE] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
NOTICE
Only a image that...

95
PLAY
Start up sound
You can select the sound that is activated whenever the camera is turned on.
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. 
Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. SOUND] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
SOUND] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the...

96
List of camera function
SIZE Print(Photo / Super Fine)()- - - - - - - - - - - -
Memo(Middle / Fine)-- - - -- - - - - --
E-mail (Small / Normal)-- - - -- - - - - --
Large()()()()()()-()- - - -
Photo--- --
Middle--- --
Small--- --
288 x 208pixels - - - - - - -()- - - - -
QUALITY Tiff (1:1)--- --
Super Fine(1:4)--- --
Fine (1:8)()()()()()()-()- - - -
Normal (1:12)--- --
1:12 - - - - - - -()- - - - -
ZOOM Optical ZOOM-- --
Digital ZOOM--
METERINGMulti-Pattern()()()()()()()()()- - - -
Spot-- --
FOCUS...

97
PLAY
List of camera function
FLASH Auto()()- - - -
Red eye (with Auto)()()-- --
Fill-in-- --
Slow sync.(with Red eye)()-- --
Off()()()()-- --
EVC -0.5 ~ -2.0EV (1/2 EV step)-- --
0.0EV()()()()()()()()- - - -
+0.5 ~ +2.0EV (1/2 EV step)-- --
SELFTIMEROff ()()()()()()()()()- - - -
2 sec.-- --
10 sec.-- --
Remote control-- --
AF  Normal (80cm ~ ∞)()()()()()()()()()- - - -
ZONE Macro (30 ~80cm)-- --
Super Macro (6 ~30cm)-- --
AUDIO Off ()()()()()()()()- - - -
(Voice memo)On()-- --
A/S/M A/S/M(A)(P) - - -...

98
List of camera function
IMPRINT Off()
Date
Date &Time
DATE TYPE YYYY/MM/DD()
DD/MM/YYYY
MM/DD/YYYY
SOUND EFFECT On()
Off
START-UP IMAGEOff
IMAGE 1()
IMAGE 2
IMAGE 3
USER IMAGE
START-UP SOUNDOff
SOUND 1()
SOUND 2
SOUND 3
SHUTTER SOUNDOff
SH.SOUND 1()
SH.SOUND 2
SH.SOUND 3
LCD BRIGHTNESS0 ~2 Level(1 Level )
VIDEO OUT NTSC()
PAL
QUICK VIEW Off /1~3 sec(1 sec)
Delete answering On
Delete answering Off()
MODE DIAL 
Function
Downloaded From camera-usermanual.com Samsung Manuals 

99
PLAY
Starting PC mode
If you insert the USB cable into the USB connection terminal, the camera working mode will change
to the PC mode automatically.
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The autofocus indicator lamp(red) lamp blinks when the files are transferring via the USB connection.
Connecting the camera to PC
1. Turn the PC power on.
2. Turn the camera power on.
3. Connect the PC and the camera via the USB...

100
Downloading stored images
Once you have downloaded images to your PC, they can be edited and printed.
Starting PC mode
1. Connect the camera to your PC with the USB cable.
2. On your computer’s desktop display, select [My computer] and
double click [Removable Disk 
DCIM 100SSCAM]. 
The image files will then be displayed.
3. Select an image and press the right mouse button. 
4. A pop-up menu will open.
Click [Cut] or [Copy] menu
[Cut] : cuts a selected file.
[Copy] : copies files.
5. Click a folder...