Samsung Digimax V4000 Users Manual

							91
PLAY
Video
INFORMATION
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy,
Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.
Even if the [SOUND] function is [ON], the sound will not activate in this menu.
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be
governed by the type of machine (monitor or TV, etc.) to which the camera is connected.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
2. 
Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
5. Select the [IMPRINT] menu by pressing the UP/DOWN button.
6. Press the DOWN button on the [IMPRINT] menu and the next
menu page will be displayed.
7. Select [VIDEO] menu by pressing the UP/DOWN button.
8. Press the RIGHT button and the cursor will shift to the [VIDEO]
sub menu.
9. Select the desired sub menu by pressing the UP/DOWN button.
10. 
Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.BACK:
PLAY SETUP MyCAM
SET:OK
SOUND
LCD
VIDEO
Q.VIEWNTSC
PAL
EXIT:MENU
PLAY SETUP MyCAM
PAGE:
FILE
PWR OFF
LANGUAGE
FORMATSERIES
OFF
ENGLISH
NO
Downloaded From camera-usermanual.com Samsung Manuals 
						

							92
Connecting to an external monitor
Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the
camera to an external monitor via the video cable. When the camera is connected to an external
monitor, the LCD monitor will be turned off automatically.
INFORMATION
When using a TV as an external monitor, you will need to select the external or AV channel
of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When the camera is connected to an external monitor, the menu will be visible on the external
monitor and the menu functions are the same as those indicated on the LCD monitor.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							93
PLAY
Quick view
You can briefly review the last image captured during the pre-set time.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Press the DOWN button until the [Q. VIEW] menu is selected.
4. Press the RIGHT button and the cursor will shift to the [Q.VIEW]
sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
- [OFF] : The quick view function can’t be activated.
- [1 ~ 3 SEC] : The captured image is briefly displayed during the
selected time.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will be
disappeared.
* Setting up the [DEL, ANSWER] function
If you select [1~3SEC] sub menu at the step 5, press the RIGHT
button and the [DEL. ANSWER] menu will be displayed.
Select the desired [DEL. ANSWER] sub menu by pressing the
UP/DOWN button.
- Selecting [OFF] : A [DEL. ANSWER] message will not display.
- Selecting [ON] : You can delete the captured image at once.
* Using the [DEL.ANSWER] menu
If you select [ON] at the [DEL.ANSWER] menu, a message as
shown alongside will be displayed after taking a picture.
- Selecting [YES] : the captured image is deleted.
- Selecting [NO] : the captured image is stored.
INFORMATION
The quick view function doesn’t apply to the movie clip and sound clip file.
[Q.VIEW] function is not adjusted to the TIFF file type.
BACK:
PLAY SETUP MyCAM
SET:OK
SOUND
LCD
VIDEO
Q.VIEW
1  SEC    
BACK:
PLAY SETUP MyCAM
SET:OK
SOUND
LCD
VIDEO
Q.VIEWDEL.ANSWER
OFF
ON
EXIT:MENU
PLAY SETUP MyCAM
PAGE:
FILE
PWR OFF
LANGUAGE
FORMATSERIES
OFF
ENGLISH
NO
Downloaded From camera-usermanual.com Samsung Manuals 
						

							94
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. 
Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. IMAGE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
IMAGE] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
NOTICE
Only a image that is save as a LOGO at the [RESIZE] sub menu can be used as the USER IMAGE.
If the USER IMAGE was not saved, no image will be displayed on the LCD monitor at the
time of camera power on. Refer to p.74 for selecting the USER IMAGE.
The USER IMAGE will not be deleted by the [DEL.ALL] or [FORMAT] menu.
MyCAM menu
You can set up a start up image, start up sound and shutter sound.
Every camera working mode has the MyCAM menu.
Start up image
You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
MOVE:
PLAY SETUP MyCAM
CHANGE:
S.IMAGE
S.SOUND
SH.SOUNDIMAGE2
SOUND1
SH.SOUND1
BACK:
PLAY SETUP MyCAM
SET:OK
S.IMAGE
S.SOUND
SH.SOUNDIMAGE 2
Downloaded From camera-usermanual.com Samsung Manuals 
						

							95
PLAY
Start up sound
You can select the sound that is activated whenever the camera is turned on.
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. 
Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. SOUND] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
SOUND] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. 
Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SH. SOUND] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [SH.
SOUND] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
Shutter sound
You can select the shutter sound.
MOVE:
PLAY SETUP MyCAM
CHANGE:
S.IMAGE
S.SOUND
SH.SOUNDIMAGE2
SOUND1
SH.SOUND1
BACK:
PLAY SETUP MyCAM
SET:OK
S.IMAGE
S.SOUND
SH.SOUNDOFF
SOUND1
SOUND2
SOUND3
BACK:
PLAY SETUP MyCAM
SET:OK
S.IMAGE
S.SOUND
SH.SOUNDOFF
SH. SOUND1
SH. SOUND2
SH. SOUND3
MOVE:
PLAY SETUP MyCAM
CHANGE:
S.IMAGE
S.SOUND
SH.SOUNDIMAGE2
SOUND1
SH.SOUND1
Downloaded From camera-usermanual.com Samsung Manuals 
						

							96
List of camera function
SIZE Print(Photo / Super Fine)()- - - - - - - - - - - -
Memo(Middle / Fine)-- - - -- - - - - --
E-mail (Small / Normal)-- - - -- - - - - --
Large()()()()()()-()- - - -
Photo--- --
Middle--- --
Small--- --
288 x 208pixels - - - - - - -()- - - - -
QUALITY Tiff (1:1)--- --
Super Fine(1:4)--- --
Fine (1:8)()()()()()()-()- - - -
Normal (1:12)--- --
1:12 - - - - - - -()- - - - -
ZOOM Optical ZOOM-- --
Digital ZOOM--
METERINGMulti-Pattern()()()()()()()()()- - - -
Spot-- --
FOCUS AF()()()()()()()()()- - - -
MF (indicator)-- --
SHOOTINGSingle()()()()()()()()- - - -
Continuous-- --
AEB-- --
ISO AUTO()()()()()- - - -
100()()()-- --
200-- --
400-- --
W.BALANCEAuto()()()()()()()()()- - - -
Daylight-- --
Cloudy-- --
Fluorescent-- --
Tungsten-- --
EFFECT Normal()()()()()()()()()- - - -
B&W-- --
sRGB-- --
Sunset-- --
SHARPNESSSoft-- --
Normal()()()()()()()()()- - - -
Vivid
-- --
MODE DIAL 
Function
: Default,  : After restarting the camera,  : Selectable ,  X: Not Available,  -: Not Selectable
Downloaded From camera-usermanual.com Samsung Manuals 
						

							97
PLAY
List of camera function
FLASH Auto()()- - - -
Red eye (with Auto)()()-- --
Fill-in-- --
Slow sync.(with Red eye)()-- --
Off()()()()-- --
EVC -0.5 ~ -2.0EV (1/2 EV step)-- --
0.0EV()()()()()()()()- - - -
+0.5 ~ +2.0EV (1/2 EV step)-- --
SELFTIMEROff ()()()()()()()()()- - - -
2 sec.-- --
10 sec.-- --
Remote control-- --
AF  Normal (80cm ~ ∞)()()()()()()()()()- - - -
ZONE Macro (30 ~80cm)-- --
Super Macro (6 ~30cm)-- --
AUDIO Off ()()()()()()()()- - - -
(Voice memo)On()-- --
A/S/M A/S/M(A)(P) - - - -
SETAv(F5.6)(F5.6)(F5.6)-- --
Tv(1/250)(1/250)(1/250)-- --
SLIDE SHOWOFF /1~10 sec.(1sec step) - - - - - - - - - -(OFF)
Repeat Off - - - - - - - - - -()
Repeat On - - - - - - - - - -
PROTECT Unlock - - - - - - - - - -()
Lock - - - - - - - - - -
DPOF Index (1 print) - - - - - - - - - -
Standard (0 ~30 prints) - - - - - - - - - -
EDIT Trimming - - - - - - - - - -
Resize - - - - - - - - - -
DELETE ALL - - - - - - - - -
FILE NAMEReset()
Series
POWER OFFOFF /1~10 min.(3 min)
LANGUAGE15 Languages(English)
DATE 2002.01.01 ~2050.12.31
(2003.01.01 )
MODE DIAL 
Function
Downloaded From camera-usermanual.com Samsung Manuals 
						

							98
List of camera function
IMPRINT Off()
Date
Date &Time
DATE TYPE YYYY/MM/DD()
DD/MM/YYYY
MM/DD/YYYY
SOUND EFFECT On()
Off
START-UP IMAGEOff
IMAGE 1()
IMAGE 2
IMAGE 3
USER IMAGE
START-UP SOUNDOff
SOUND 1()
SOUND 2
SOUND 3
SHUTTER SOUNDOff
SH.SOUND 1()
SH.SOUND 2
SH.SOUND 3
LCD BRIGHTNESS0 ~2 Level(1 Level )
VIDEO OUT NTSC()
PAL
QUICK VIEW Off /1~3 sec(1 sec)
Delete answering On
Delete answering Off()
MODE DIAL 
Function
Downloaded From camera-usermanual.com Samsung Manuals 
						

							99
PLAY
Starting PC mode
If you insert the USB cable into the USB connection terminal, the camera working mode will change
to the PC mode automatically.
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The autofocus indicator lamp(red) lamp blinks when the files are transferring via the USB connection.
Connecting the camera to PC
1. Turn the PC power on.
2. Turn the camera power on.
3. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera USB connection terminal.
- Insert the large connector of the USB cable into the USB
port of the PC
- The plugs must be firmly inserted.
Disconnecting the camera and PC
Refer to the following page
- WIN 98SE : p.118 
- WIN 2000/ME/XP : p.118
INFORMATION
The camera driver must be installed before using PC mode.
To save battery power, it is recommended that you use an AC adaptor(Optional) when
connecting the camera to a computer.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							100
Downloading stored images
Once you have downloaded images to your PC, they can be edited and printed.
Starting PC mode
1. Connect the camera to your PC with the USB cable.
2. On your computer’s desktop display, select [My computer] and
double click [Removable Disk 
DCIM 100SSCAM]. 
The image files will then be displayed.
3. Select an image and press the right mouse button. 
4. A pop-up menu will open.
Click [Cut] or [Copy] menu
[Cut] : cuts a selected file.
[Copy] : copies files.
5. Click a folder that you want to paste the file.
6. Press the right mouse button and a pop-up menu will open. 
Click [Paste].
7. An image file is transferred from camera to your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor
and you can copy or move the image files.
Downloaded From camera-usermanual.com Samsung Manuals