Samsung Digimax V4000 Users Manual

111
Setting up the application software
SOFTWARE
3. A window for which you can select application software will
be displayed. Select the application program and click the
[Install] button. 
Refer to page.109 for more information about the
application program.
4. Install Digimax Viewer. 
Click [Next >] button.
5. The Software License Agreement window will be displayed.
If you agree to this, click [Yes], the window will then move
to the next step. If you disagree, click [No] and the
installation program...

112
Setting up the application software
7. A window will open, asking you to choose a folder to which
program icons will be added. Click [Next >] button. 
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >] button.
[Click!]
8. Digimax Viewer Installation is completed. 
The PhotoImpression installation window will be displayed
as shown alongside. 
Click the [OK] button.
[Click!]
9. A Welcome window will be displayed.
Click the [Next >] button....

113
Setting up the application software
SOFTWARE
11. A destination selection window will open. Click [Next >].
To copy to the files to another folder, click [Browse...] and
choose a folder you want.
[Click!]
12. The [Select Components] window will appear. Click [Next
>] button.
[Click!]
13. A window will open, asking you to choose a folder to
which program icons will be added. Click [Next >] button. 
If you want to add the program icons to a different folder,
choose another folder, and then click [Next...

114
Setting up the application software
15. To apply changes, you must restart the computer. 
Select [Yes, I want to restart my computer now], and then
click [OK].
16. After restarting the computer, connect the PC to the camera with the USB cable.
18. If you can see [Removable Disk] under [My computer], the
camera driver installation was successful. 
Now you can transfer image files from the camera to PC
via the USB cable.
[Click!]
17. Turn the camera power on. [Found New Hardware
Wizard] will open and...

115
Setting up the application software
SOFTWARE
INFORMATION
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and
a window asking you to select a driver file may appear. In this case, specify Digimax V4000
Driver in the CD supplied. (for Windows 98 and 98 SE).
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You...

116
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start Settings] and click [Control Panel].
[Click !]
4. Uninstallation is complete.  Click the [Finish] button and
the window will disappear.
[Click !]
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window will
open. Click [Digimax V4000] and click the
[Add/Remove] button.
Downloaded From camera-usermanual.com Samsung Manuals 

117
SOFTWARE
Removable Disk
To use this camera as a Removable Disk, install (p.110) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM 
100SSCAM) can be transferred to the PC.
INFORMATION
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is...

118
Removing the removable disk
[Click!]
[Double-click!]
[Click!]
[Click!]
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have
to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have
to wait until the lamp illuminates.
2....

119
SOFTWARE
Removing the removable disk
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera
driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. 
This camera is compatible with MAC OS 9.x ~ 10.2.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
Setting up the USB Driver for MAC
1. Double click a new...

120
Using PhotoImpression
You can use PhotoImpression to perform the following tasks. With PhotoImpression, you can edit or store still images that you downloaded from the camera. This
software is only available in Windows version.
To start the program, click [Start 
Programs ArcSoft PhotoImpression 4 PhotoImpression4].
The following screen will appear.
[ Command Button ]
[ Tool Bar ]
Command Button
Button Description
Imports a picture from an album, a source folder, or the camera/scanner, or
captures...