Samsung Digimax U CA401 User Manual

							71
Specification
Type 1/2.5 CCD
Effective Pixels Approx. 4.0 Mega –pixel
Total Pixels Approx. 4.2 Mega –pixel 
SHD Lens f=5. 8mm  
(35mm film equivalent : 35mm)
F No. F.3.2
Still Image mode: 1.0X~ 4.0X,
Play mode: 1.0X~8.0X
Optical ViewfinderOptical virtual image viewfinder
LCD Monitor 1.5 color TFT LCD
Type TTL Auto Focus
Normal: 60cm ~ infinity, 
Macro: 6cm ~ 60cm
Type Mechanical and Electronic shutter
Speed Normal Mode: 4~ 1/2,000 sec.(Night Scene:  8~1/2,000 sec.)
Control Program AE Metering (Multi. & Spot)
Compensation2.0EV (0.5EV steps)
ISO Equivalent Auto, 100, 200, 400
ModesAuto, Auto & Red - eye reduction, Slow sync, Fill-in flash, Flash off 
Range 0.2 ~ 2m
Recharging Time Approx. 5 sec.
Sharpness Soft, Normal, Vivid
Effect Normal, B&W, Sepia
Voice Recording (max 1 hour) 
Voice Memo on Still Image (max 10 sec.)
Date Imprinting Date, Date & Time, Off (user selectable)
White BalanceAuto / Daylight /Cloudy/ Sunset / Fluorescent / Tungsten
Modes: Auto, Night, Myset, Text mode
Shooting: Single, Continuous, AEB
With audio (Recording time: memory capacity dependent)
Size: 320x240, 640x480
10 sec, 2sec, Double self
Image
Sensor
LensFocal lens
Range Digital Zoom
Viewfinder
Focusing
Shutter
Exposure
Flash
Voice Recording
Shooting
Self-timer (Single, Double)Movie ClipStill Image
Downloaded From camera-usermanual.com Samsung Manuals 
						

							72
Specification
Internal memory: 32MB flash memory
External memory (optional):MS Duo (Upto128MB guaranteed) 
Still Image: JPEG (DCF), DPOF, EXIF
Movie Clip: AVI (MJPEG)    Audio : WAV
2272: 2272X1704, 2048: 2048X1536,
1600: 1600X1200, 1024: 1024X768, 640: 640X480 
2272 : Super fine 14, Fine 28, Normal 43
2048 : Super fine 16, Fine 35, Normal 53
1600 : Super fine 29, Fine 58, Normal 80
1024 : Super fine 67, Fine 142, Normal 165
640 : Super fine 159, Fine 306, Normal 360
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Image Play Single image / Thumbnails / Slide show/ Movie Clip
Image Edit Trimming, Resizing
Digital output connector : USB,  
Audio : Mono
Video output : NTSC, PAL(user selectable)
DC power input connector : 5.0V
Primary battery : CP1
Rechargeable battery : Self Charging System, 
SLB-1037(1,000mAh, 3.7V)
AC Adapter : SAC-51(5.0V,2.0A)
Included battery source may vary depending on sales region.
Dimensions (WxHxD) 97 x 60 x 15.4mm
Weight Approx. 90g(without batteries and card)
Camera DriverStorage Driver (Windows98//98SE/2000/ME/XP, Mac OS 9.0~10.2)
ApplicationDigimax Viewer 2.1, Arcsoft PhotoImpression 4.0, Digimax Reader 
Capacity 
(32MB 
Internal Memory) Image Size File Format Media
Storage
Interface
Power Source
Software
Specifications are subject to change without prior notice.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							73
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera. 
We cannot, however, be held responsible in any way for damage caused by inappropriate
use.
Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is
not covered by the Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
System Requirements
For Windows For Macintosh
Power Mac G3 or later
Windows 98/98SE/2000/ME/XP Mac OS 9.0 ~ 10.2
Minimum 32MB RAM (XP : 128MB) Minimum 64MB RAM
140MB of available hard-disk space 110MB of available hard-disk space
USB port USB port
CD-ROM drive CD-ROM drive
QuickTime 4.0 or later for Movie Clip
PC with processor better than MMX 
Pentium 233MHz (XP : Pentium II 300MHz)
800x600 pixels, 16-bit colour display
compatible monitor (24-bit color display
recommended)
Downloaded From camera-usermanual.com Samsung Manuals 
						

							74
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the Application CD.
But you can use the camera with Mac OS 9.0 ~ 10.2.
Digimax Viewer  : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor. You can also copy,
move or delete the images and enlarge/downscale the image sizes with Digimax Viewer.
This software is only compatible with Windows.
PhotoImpression : Image editing program.
You can edit or store still images that you download from the camera. This software is only
compatible with Windows.
Be sure to check the system requirements (page 73) before installing the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							75
To use this camera with a PC, install the application software first. After this has been done, the
stored images in the camera can be moved to the PC and can be edited by an image editing
program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
Setting up the application software
Close other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
INFORMATION 
1. Click the [Install] menu in the Autorun frame.
The Digimax U-CA 401 camera driver is
installed automatically.
2. Camera driver installation is complete. 
Click the [Finish] button.
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							76
Setting up the application software
If you select [Exit] at the step 3, the application program installation will be cancelled.
INFORMATION 
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
INFORMATION 
3. A window for which you can select application
software will be displayed. Select the
application program and click the [Install]
button. 
Refer to page.74 for more information about
the application program.
4. Install Digimax Viewer. 
Click [Next >] button.
5. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step. 
If you disagree, click [No] and the installation
program will be canceled.
6. A destination selection window will open. Click
[Next >]. To copy to the files to another folder,
click [Browse ..] and choose a folder you
want.
[Click!]
[Click!]
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							77
Setting up the application software
8. Digimax Viewer installation is successfully
completed. Click the [Finish] button to install
PhotoImpression.The system will not reboot
even the [Yes, I want to restart the computer
now] option is selected.
*The frame 8 may not appear according to the
system requirements.
9. Digimax Viewer Installation is completed. 
The PhotoImpression installation window will
be displayed as shown alongside.
Click the [OK] button.
If you click [Cancel] in Step 9, the PhotoImpression installation will be canceled and the
Restart Computer window will appear.
INFORMATION
10. A Welcome window will be displayed.
Click the [Next >] button.
[Click!]
7. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button. 
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
[Click!]
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							78
Setting up the application software
12. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder
you want.
13. The [Select Components] window will appear.
Click [Next >] button.
14. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button. 
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
[Click!]
[Click!]
11. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step. 
If you disagree, click [No] and the installation
program will be canceled.
[Click!]
[Click!]
[Click!]
15. Installation is complete. 
Click the [Finish] button.
* The frame 15 may not appear according to
the system requirements.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							79
Setting up the application software
17. After restarting the computer, connect the PC to the camera with the USB cable.
18. Turn the camera power on. [Found New
Hardware Wizard] will open and the computer will
recognize the camera.
If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open. 
If the image viewer program opens, the camera
driver was setup successfully.
19. If you can see [Removable Disk] under [My
computer], the camera driver installation was
successful. 
Now you can transfer image files from the
camera to PC via the USB cable.
16. To apply changes, you must restart the
computer. Select [Yes, I want to restart my
computer now], and then click [OK].
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							80
Setting up the application software
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify the [USB
Driver] folder on the supplied software CD.
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Install
the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.84), and re-install the driver.
2. Refer to FAQ (p.90) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals