Samsung Digimax U CA401 User Manual

							51
Starting the slide show
You can change the resolution (size) of saved pictures. The pictures are saved under
different names.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [RESIZE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
A Large image can be resized to be made smaller, but a small image cannot be resized
to become larger.
Only JPEG images can be resized.
Avi and wav files can’t be resized.
You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
The resized image will have a new file name.
If the memory capacity is insufficient to store the resized image, a [CARD FULL!]
message will display on the LCD monitor and the resized image will not be stored.
INFORMATION
RESIZE
2048X1536
1600X1200
1024X768
640X480
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor. 
The [PWR OFF] function cant be activated.
While the slide show is playing, only the first frame of an avi file is displayed.
In case of a voice file, the voice recording icon will appear.
INFORMATION
Resize
Downloaded From camera-usermanual.com Samsung Manuals 
						

							52
COPY TO CARD
If the function is used without an inserted memory card, the [NO CARD !] message is
displayed, and the Play mode screen is displayed.
If there is not enough space available in the memory card to copy saved images in the
internal memory (32MB), the [COPY TO CARD] command will copy only some of the
images and display [CARD FULL!] message. Then the system will return to the playback
mode. Please be sure to delete any unnecessary images to free up space before
inserting the memory card into the camera.
INFORMATION
This enables you to copy image files to the memory card.
Copying to the Memory Card
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Select the [COPY TO CARD] menu tab by pressing the
LEFT/ RIGHT button.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [NO] : The Play mode screen is displayed
- [YES] : All images saved in the internal memory are copied
to the memory card after the [PLEASE WAIT] message is displayed. After copying
has been completed, the screen will return to play mode.
COPY TO CARD
NO
YES
Downloaded From camera-usermanual.com Samsung Manuals 
						

							53
DPOF
This function allows you to embed print quantity information on a stored image.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [STANDARD] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the UP and DOWN buttons to select [ONE PIC] or
[ALL PICS], and then press the OK button. A window for
selecting number of copies will be displayed.
[ONE PIC] : Set the number of copies to print for the
current picture only.
[ALL PICS] : Set the number of copies to print for each
picture, excluding movie clips and voice
recordings.
5. Use the UP and DOWN buttons to select the number
copies and then press the OK button.
- The DPOF icon (        ) will appear by the pictures for which the number of copies to print
is set.
DPOF : STANDARD
DPOF
BACK:SET:OK STANDARD ONE PIC
INDEX ALL PICS
CANCEL
DPOF stands for Digital Print Order Format. It allows you to save the picture printing
information in the DCIM/MISC folder on the memory card. Select the pictures to be
printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
This function is not available for Movie clips and Voice recording files.
The DPOF function is available only for images saved in a memory card.
To add DPOF information to an image saved in the internal memory, please use the
[COPY TO CARD], to copy the image to the memory card first.
DPOF
MOVE PIC:SET:OK
EXIT:SH1
00 PRINTS
Downloaded From camera-usermanual.com Samsung Manuals 
						

							54
DPOF : INDEX
You can cancel the [STANDARD], [INDEX] settings.
Cancel the setting to reset the value to its default.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [CANCEL] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [STANDARD] is selected : Cancels the standard print setting.
If [INDEX] is selected : Cancels the index print setting.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
DPOF
BACK:SET:OK STANDARD
INDEX STANDARD
CANCEL INDEX
DPOF : CANCEL
Images (except for movie clips and voice file) are printed as index type.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [INDEX] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [NO] is selected : Cancel the index print setting.
If [YES] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
DPOF
BACK:SET:OK STANDARD YES
INDEX NO
CANCEL
Downloaded From camera-usermanual.com Samsung Manuals 
						

							55
Setup menu
In this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode. 
The items indicated by                    are default settings.
Menu tab Main menu Sub menu Secondary menu Page
RESET-
SERIES-
ENGLISH ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
NO-
YES-
04/05/01 13:00-
Y/M/D-
M/D/Y-
D/M/Y-
OFF-
DATE-
D&TIME
OFF
LOW
MEDIUM
HIGH
DARK
NORMAL 
BRIGHT
NO
YES
FILE
PWR OFF
LANGUAGE 
FORMAT
DATE
IMPRINT
SOUND
LCD p.56
p.57
p.58
p.58
p.59 ~ 60
p.59 ~ 60
p.60
p.60
CANCEL, 1~3~10MIN
RESETp.61
Downloaded From camera-usermanual.com Samsung Manuals 
						

							56
Setup menu
This function allows the user to select the file naming format.
Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FILE] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[RESET] : After using the reset function, the next file name
will be set from 0001 even after formatting, deleting all or inserting a new
memory card.
[SERIES] : Under this system, the file name will directly follow the last stored file name,
regardless of any actions such as file deletion or formatting.
5. Press the menu button twice and the menu will disappear.
The first stored folder name is 100SSCAM, and the first file name is SCD40001.
File names are assigned sequentially from SCD40001 SCD40002 ~ SCD49999.
The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 
101SSCAM ~  999SSCAM.
The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
INFORMATION
SET UP
BACK:SET:OK FILE RESET
PWR OFF SERIES
LANGUAGE
AUTO
Menu tab Main menu Sub menu Secondary menu Page
ON
OFF
NTSC
PAL
LAMP
VIDEO 
Q.VIEWp.61
p.63 p.62
OFF, 1 ~ 3 SEC
File name
Downloaded From camera-usermanual.com Samsung Manuals 
						

							57
Auto power off
Even if the batteries or AC adapter are removed and inserted again, the power off setting
will be preserved.
Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording or movie clip.
INFORMATION
Setting Power Off
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [PWR OFF] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. A menu will be displayed on the LCD monitor as shown
alongside. 
Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [CANCEL] : 
The power off function will not operate.
Selecting [1 ~ 10 MIN] : 
The power will turn off automatically if not used for the
period of time specified.
5. Press the menu button twice and the menu will
disappear.
This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
SET UP
BACK:SET:OK FILE
PWR OFF
LANGUAGE
CANCEL
SET UP
BACK:SET:OK FILE
PWR OFF
LANGUAGE
3 MIN
AUTO
AUTO
Downloaded From camera-usermanual.com Samsung Manuals 
						

							58
Language 
Setting Language
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LANGUAGE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
LANGUAGE sub menu : Korean, English, French,
German, Italian, Spanish,  S.Chinese, T.Chinese
5. Press the menu button twice and the menu will disappear.
Formatting a Memory Card
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FORMAT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : The memory card will not be formatted.
If [YES] is selected : A [PLEASE WAIT!] message appears and the memory card will be
formatted. If you ran FORMAT in Play mode, a [NO IMAGE!]
message will appear.
There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or
AC adapter are removed and inserted again, the language setting will be preserved.
Formatting a memory card
This is used for formatting the memory card. If you run [FORMAT] on the memory card, all
images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
If the memory card is not inserted, the internal memory will be formatted.
Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can’t recognize or one that has been taken
from another camera.
Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a [CARD
ERROR!] message.
INFORMATION
SET UP
BACK:SET:OK FILE
PWR OFF
LANGUAGE
SET UP
BACK:SET:OK PWR OFF
LANGUAGE
FORMATNO
YES
AUTO
AUTO
Downloaded From camera-usermanual.com Samsung Manuals 
						

							59
Setting up the Date/ Time/ Date type
You can change the date and time that will be displayed on the captured images and set up
the date type.
Setting Date/Time & Selecting Date type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [DATE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP, DOWN, LEFT, and RIGHT buttons to select
the desired submenu value, and then press the OK
button.
RIGHT button : Selects the
year/month/day/hour/minute/date type.
LEFT button : Moves the cursor to the [DATE] main
menu if the cursor is at the first item of
the date and time setup. In all other
cases, the cursor will be shifted to the
left of its current position.
UP and DOWN buttons: Changes the setting value.
- Date type 
[Y/M/D] : year/month/day [M/D/Y] : month/day/year   
[D/M/Y] : day/month/year
5. Press the menu button twice and the menu will disappear.
There is an option to include DATE/TIME on still images.
Date Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
Imprinting the recording date
SET UP
BACK:SET:OK LANGUAGE
FORMAT
DATE
04.05.01 08:17Y/M/D
SET UP
BACK:SET:OK LANGUAGE
FORMAT
DATE
04.01.01 08:17Y/M/D
SET UP
BACK:SET:OK FORMAT OFF
DATE DATE
IMPRINT D&TIME
AUTO
AUTO
AUTO
[OFF] : The DATE & TIME will not be imprinted on the image file.
[DATE] : Only the DATE will be imprinted on the image file.
[D&TIME] : The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							60
Imprinting the recording date
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 24
hour clock.
The imprint function is applied only to still images.
INFORMATION
Sound
If a sound option other than [OFF] is selected, the camera activity can be monitored with
sounds including a start up sound and a shutter sound.
Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [SOUND] sub menu : OFF/LOW/MEDIUM/HIGH
5. Press the menu button twice and the menu will disappear.
You can adjust the LCD brightness.
Adjusting LCD brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [LCD] sub menu : DARK/NORMAL/BRIGHT
5. Press the menu button twice and the menu will disappear.
LCD brightness
SET UP
BACK:SET:OK
MEDIUMDATE
IMPRINT
SOUND
SET UP
BACK:SET:OK DARK
NORMAL
BRIGHT IMPRINT
SOUND
LCD
AUTO
AUTO
Downloaded From camera-usermanual.com Samsung Manuals