Samsung Digimax U CA3 User Manual

							41
Effect 
Sharpness
You can adjust the sharpness of the picture you want to take.
You cannot check the sharpness effect on the LCD monitor
before you take a picture, because this function is applied only
when the captured image is stored on the memory. You can
select from AUTO and MANUAL modes. 
Sub menu Icon  Description 
The edges of the image are softened. 
This effect is suitable for editing images on your PC.
The edges of the image are sharp. 
This is suitable for printing.
The edges of the image are emphasized. The edges will
appear sharp, but noise may occur in the recorded image.
Setting RGB Values
1. Use the DOWN button to select [RGB] among the Effect
submenus, and then press the OK button. A screen that
looks like the one shown on the right will appear.
2. Use the UP and DOWN buttons to select the [OFF] or
[ON] auxiliary menu, and then press the OK button.
[OFF] : Select this if you do not want to change the RGB
values.
[ON] : Select this to open a window where you can
adjust the RGB values.
Use the UP and DOWN buttons to navigate the R, G, and
B controls. Use the LEFT and RIGHT buttons to set the
value for each control. If you press the OK button, your
changes will be saved and the menu will disappear.
VIVID NORMALSOFT
[ STILL IMAGE mode ]
SOFT
NORMAL
VIVIDSHARP
B & W
SUNSET
SEPIA
RGBOFF
ONEFFECT
EXIT:SH1 SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							42
Starting play mode
Turn the camera on and select Play mode by pressing the play mode button (         ). 
The camera can now play back the images stored in the memory. 
If you have turned on the camera by pressing the POWER button, you can press the PLAY
button once to switch to Play mode and press it  again to switch to Recording mode. 
If you have turned on the camera by pressing the PLAY button, you can press the PLAY button
again to turn off the camera. 
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
Playing back a still image
1. Select the PLAY mode(         ) by pressing the
play mode button.
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT / RIGHT button.
Press and hold the LEFT or RIGHT button to
play back the images quickly.
Manner mode: Pressing the power button for more than 3 seconds changes the buzzer
and start-up sound setting to OFF, even though you may have set these
to ON. To turn on the startup sound and operation sound, set the startup
sound (MyCAM mode) and operation sound (Setup mode) to a setting
other than [OFF].
Even if the cameras power is off, you can start the play mode by pressing the play
mode button.
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							43
Starting play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded movie clip that you want to play back
by using the LEFT/RIGHT button. If you select a movie
clip, the movie clip indicator (        ) will be displayed on the
LCD monitor.
4. Press the play & pause button (          ) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press the
play & pause button again.
- Pressing the play & pause button again will cause the
movie clip file will restart.
- To rewind the movie clip while it is playing, press the
LEFT button. To fast forward the movie clip, press the
RIGHT button.
- To stop playback of the movie clip, press the play & pause button (           ), and then press
the LEFT or RIGHT button.
Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded voice that you want to play back by
using the LEFT/RIGHT button. If you select a recorded
voice file, the voice indicator (       ) will be displayed on the
LCD monitor.
4. Press the play & pause button (            ) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back,
press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button. To fast forward the voice
file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the LEFT
or RIGHT button.
PLAY
PLAY
Downloaded From camera-usermanual.com Samsung Manuals 
						

							44
LCD monitor indicator
The LCD monitor displays information about the shooting conditions.
No. Description Icon Page 
1 Battery P.15
2 Play mode
3 File Type
4 Voice memo P.46
5 Protect indicator P.52
6 DPOF indicator P.56
7  Stored image number
SIZE : 2048X1536 Size 
AV : F2.8 Aperture value
TV : 1/60 Shutter speed
ISO : 100  ISO sensitivity
FLASH : OFF Whether or not the
flash is used. 
DATE : 03/09/01 Recording date
9
If you press the LCD button, you can check the following recording information: 
SIZE : 2048X1536
AV : F2.8
TV : 1/60
ISO : 100 
FLASH : OFF
DATE : 03/09/01
Downloaded From camera-usermanual.com Samsung Manuals 
						

							45
Using the camera buttons to adjust the camera
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing the
5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an enlarged
view by checking the image enlargement indicator shown
at the bottom left of the LCD monitor. (If the image is not
an enlarged view, the indicator will not be displayed.)
You can also check the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
Thumbnail(        ) / Enlargement(        ) button 
[ Normal display mode ]
Pressing the thumbnail
button(       )
Pressing the enlargement
button(       )
Highlighted image
You can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
Thumbnail display
1. While an image is displayed full screen, press the
thumbnail  button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement
button (      ).
[ Thumbnail display mode ]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							46
Thumbnail(      ) / Enlargement(      ) button 
The maximum enlargement rate in proportion to the image size.
Trimming : You can extract part of the image that you want
and save it separately.
1. Select an image that you want to enlarge and press the
enlargement button.
2. Different parts of the image can be viewed by pressing the
5 function button.
3. Press the MENU button and a message will be displayed
as shown alongside.
4. Press the OK button to save the trimmed image with a
new file name. The trimmed image will be displayed on the LCD monitor. Press the LEFT
button to return to the image before it was selected.
- If there is little memory space to save the trimmed image, the image can
t be trimmed.
Image size 2048/2048P 1600/1024 640
Maximum enlargement rateX5 X3 X1.5
Voice(     ) memo / Up button
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up. 
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your audio to a stored still image.
Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button (     ) and the voice memo
indicator will display. The camera is now ready to record a
voice memo.
TRIMMING?
T TR
RI
IM
M:
:O
OK
K
C CA
AN
NC
CE
EL
L:
:
START.SHUTTER
REC
Downloaded From camera-usermanual.com Samsung Manuals 
						

							47
Voice(     ) memo / Up button
3. Press the shutter button to start recording. The [REC]
message will be displayed on the LCD monitor (as shown)
and voice will be recorded to the still image for 10
seconds.
4. The recording can be stopped by pressing the shutter
button again.
5. The (        ) icon will be displayed on the LCD monitor after
voice memo recording has finished. 
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that
already has a voice memo, the existing voice memo will be erased.
Play & Pause(         )/ Down button
In Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
[ Voice recording is stopped ][ Voice recording is paused ][ Voice file is playing ]
PLAY PAUSE PLAY
STOP.SHUTTER
REC
Downloaded From camera-usermanual.com Samsung Manuals 
						

							48
LEFT / RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu
tab to the right of the cursor, or to move an auxiliary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
- OK button : When the menu is displayed on the LCD monitor, the OK button is used
for confirming data that is changed by using the 5 function button.
The shooting information will be displayed on the LCD
monitor.
The last image stored in the memory is displayed on the
LCD monitor by pressing the play mode button.
Pressing the LCD button in the PLAY(     ) mode will
change the display as shown below. [Image & Icons] 
[Image & Information] [Image only]
[ Image & Icons ] [ Image & Information ] [ Image only ]
LCD button 
Pressing
the LCD
button
Pressing the LCD buttonPressing
the LCD
button
If you press the LCD button in Thumbnail Display mode, the image to be deleted (       ) will be
selected.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							49
Delete(     ) button
This deletes images stored on the memory card.
Before deleting images from the camera, you should protect or download images to
your computer that you wish to keep.
INFORMATION 
Deleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and
then press the DELETE (       ) button.
2. The following message will be displayed on the LCD monitor.
3. Press the OK button to delete the image. The image that precedes the deleted one will be
displayed on the LCD monitor.
- Deleting Multiple Images
You can only delete the image displayed on the LCD monitor. If you press the LCD button
with an image displayed on the LCD monitor selected, the image will maintain its selected
state (        mark) as shown in the following illustration. Use the UP, DOWN, LEFT, RIGHT
and LCD buttons to select multiple images(i.e., press the LCD button each time you select
the image you want to delete), and then press the DELETE button to delete all selected
images. If you want to de-select the image, press the LCD button again. The image over
which the cursor is placed will be deleted simultaneously.
Deleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT / RIGHT button and press the DELETE(      ) button.
2. A message will display as shown alongside on the LCD
monitor.
3. Press the OK button to delete the image. The image that
precedes the deleted one will then be displayed on the
LCD monitor. 
DELETE?
D DE
EL
L:
:O
OK
K
C CA
AN
NC
CE
EL
L:
:
Press the
DELETE
button.
DELETE?
DEL:OK
CANCEL:
Downloaded From camera-usermanual.com Samsung Manuals 
						

							50
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the
MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are
as follows. To capture an image after setting up the play menu, press the PLAY button.
The items indicated by                        are default settings.
Menu tab Main menu Sub menu Secondary menu Page
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SLIDE PROTECT
RESIZE
ROTATE DEL. ALL
STANDARD
INDEX
SIZE
CANCEL D
P
O
FON
p. 54p. 52
p. 53
p. 55p. 52
p. 56
p. 56
p. 57
p. 57
OFF ~ 10 SEC  
0 ~ 30 PRINTS
-
REPEAT ONE PICUNLOCK
LOCK
UNLOCK
LOCK ALL PICS
1600X1200
1024X768
640X480
LOGO
OFF
ON NO
YES
NO
YES
DEFAULT
3X5
4X6
5X7 
8X10
STANDARD
INDEX
SIZE ONE PIC
ALL PICSOFF
Downloaded From camera-usermanual.com Samsung Manuals