Samsung Digimax U CA3 User Manual

							91
Specifications
Type 1/2.7 CCD
Effective Pixel Approx. 3.2 Mega-pixel
Total Pixel Approx. 3.3 Mega-pixel
SHD Lens f = 5.8 ~ 17.4mm 
(35mm film equivalent : 38 ~ 114mm)
F No. F2.8 ~ F4.8
Still Image mode : 1.0X ~ 3.0X 
Play mode : 1.0X ~ 5.0X (depends on image size)
Optical ViewfinderReal image optical viewfinder
LCD Monitor 1.5 color TFT LCD
Type TTL auto focus
Normal : 80cm ~ infinity
Macro : 5 ~ 80cm (Wide), 50 ~ 80cm (Tele)
Type Mechanical and Electronic shutter
Speed 2 ~ 1/2,000 sec.(16 ~ 1/2,000 sec. in Night Mode)
Program AE
Metering : Multi, Spot
Compensation2EV (0.5EV steps)
ISO Equivalent Auto, 100, 200, 400
Long-time Shutter Function only in Night Mode
- Shutter Speed : 16 ~ 1/8 sec.
- Aperture : F2.8 / F4.8 selectable 
ModesAuto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
Range Wide : 0.2 ~ 3.0m,  Tele : 0.5 ~ 2.0m
Recharging Time Approx. 6 sec.
Sharpness Soft, Normal, Vivid
Effect Normal, B&W, Sunset, Sepia, RGB
White Balance Auto, Daylight, Cloudy, Fluorescent, Tungsten, Custom
Voice Record (max. 1 hour)
Voice Memo on Still Image (max. 10 sec.)
Date Imprinting Date&Time, Date, Off (user selectable)
Modes : Auto, Manual, Night, 
Self-timer : 10 sec., 2 sec.
With Voice (Recording Time : In proportion to memory capacity)
Resolution : 320x240, 160x120
Frame Rate : 20fps, 15fps
MediaMemory Stick Duo (up to 256MB guaranteed, Memory Stick PRO Duo supported)
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : MOV (MPEG-4)
Voice Clip : WAV (G.711)
2048 : 2048x1536 pixels,   2048P : 2048x1360 pixels, 
1600 : 1600x1200 pixels,   1024 : 1024x768 pixels,   640 : 640x480 pixels  
Image
Sensor
LensFocal Length
Range
Control Digital Zoom
Viewfinder
Focusing
Shutter
Exposure
Flash
Voice Recording
Shooting
Movie Clip Still Image Manual
Storage
Image Size File Format
Downloaded From camera-usermanual.com Samsung Manuals 
						

							92
Specifications
2048 : Super fine 17, Fine 33, Normal 50
2048P : Super fine 19, Fine 38, Normal 56
1600 : Super fine 27, Fine 54, Normal 82
1024 : Super fine 66, Fine 132, Normal 198
640 : Super fine 169, Fine 336, Normal 501
* These figures are measured under Samsung’s standard conditions and
may vary depending on shooting conditions and camera settings.
Single Image, Thumbnails, Slide Show, Movie Clip
Trimming, Rotating, Resizing
Digital output connector : USB 1.1
Audio : Mono
Video output : NTSC, PAL (user selectable)
DC power input connector : 3.3V
Rechargeable 3.7V Li-ion battery (SLB-1037) or 3V Lithium battery (CP1)
* Included battery may vary depending on sales region.
AC Adapter (optional) : SAC-32 (DC 3.3V, 2A)
Dimensions (WxHxD) 102 x 53.8x 31.6 mm
Weight Approx. 119g (without batteries and card)
Operating Temperature 0 ~ 40 
Operating Humidity 5 ~ 85%
Camera DriverStorage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.x or later)
QuickTime Player 6.3, MGI PhotoSuite 3 SE, 
Digimax Viewer 2.1, DigiStudio
MPEG-4 Movie Clip, 3D Avatar (Character) Loading Screen,
7 Color Function Lamp, RGB Color Effect
Capacity 
(32MB) Storage
InterfaceImage PlayFormat
Edit
Power Source
Special Features Software
Application
System Requirements
For Windows
For Macintosh
Digimax U-CA 3
PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/98SE/2000/ME/XP
Minimum 32MB RAM (XP : 128MB)
140MB of available hard-disk space
USB port
CD-ROM drive
800x600 pixels, 16-bit colour display compatible monitor 
(24-bit color display recommended)
Power Mac G3 or later
Mac OS 9.x ~ 10.2
Minimum 64MB RAM
110MB of available hard-disk space
USB port
CD-ROM drive
QuickTime 4.0 or later for Movie Clip
Specifications are subject to change without prior notice.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							93
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera. 
We cannot, however, be held responsible in any way for damage caused by inappropriate use.
Using a Hand-made PC or a OS(Operating System) that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to
the PC, you should first install the
camera driver.
Camera driver : This enables images to transfer between the camera and PC. 
This camera uses the USB Storage Driver as the camera driver.  You can use the camera as a
USB card reader.
After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in
[Windows Explorer] or [My computer].  A USB Storage Driver is provided only for Windows. 
A USB Driver for MAC is not included with the Application CD. But you can use the camera with
Mac OS 9.0~10.2.
About the software
Downloaded From camera-usermanual.com Samsung Manuals 
						

							94
Software Notes
QuickTime Player : The program for playing back QuickTime movies (.mov). It can also play
video files compressed with MPEG4 codec.
Digimax Viewer 2.1 : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor.  You can also copy,
move or delete the images and enlarge /downscale the image sizes with Digimax Viewer. This
software is only compatible with Windows.
MGI PhotoSuite III SE: Image editing program
You can edit or store still images that you download from the camera.
This software is only compatible with Windows.
DigiStudio: Software for creating 3D avatars.
You can store 3D avatar files on the camera and use one of the avatar as the startup image.
Please be sure to check the system requirements for the software before installing. This
software is only compatible with Windows.
Be sure to check the system requirements before installing the driver.
You should allow 5~10 seconds for running the automatic setup program according to
the capability of the computer. If the frame does not show, run the [Windows Explorer]
and select [samsung.exe] in the CD-ROM Drive root directory.
INFORMATION
DigiStudio
Recommended System RequirementsMinimum System Requirements
CPU Pentium III 500Mhz   Pentium II 400Mhz 
RAM 128MB   64MB
Graphic Card
Sound Card
Hard Disk
Operating System
Web Browser
Graphic card with 3D acceleration and at
least 8MB of video RAM Graphic card with 3D acceleration and at
least 16MB of video RAM
16 Bit Stereo Sound Card
150MB or more available space 
Windows 98SE/2000/ME/XP  
Internet Explorer 5.0 or later
Downloaded From camera-usermanual.com Samsung Manuals 
						

							95
Setting up the application software
To use this camera with a PC, install the application software first. 
After this has been done, the stored images in the camera can be moved to the PC and can be
edited by an image editing program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
Close other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
INFORMATION 
4. A Welcome window will appear. 
Click [Next >] to proceed to the next screen.
[Click !]
1. Click the [Install] menu in the Autorun frame. 
The U-CA 3 camera driver is installed automatically. 
2. Installation is complete. 
Click the [Finish] button.
3. Click [Next >] to begin installing QuickTime.
[Click !]
[Click !]
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							96
Setting up the application software
5. The Software License Agreement window will open, asking
you to agree to the licensing. Use the button on the bottom
left to select the language of your choice, and then click
[Agree] to accept the license agreement. The installation will
proceed to the next stage. If you do not agree to the license
agreement, click [Disagree]. The installation will be canceled. 
If the language of your choice is not listed, please select
[English].
6. A window will open, asking you to select a destination folder
where the files will be copied to. Click [Next >]. To copy the
files to another folder, click [Browse..] Browse to a folder you
want to copy the files to.
7. The Choose Installation Type window will open. 
Click [Next >].
[Minimum] : Installs required files only.
[Recommended] : Installs required files and the most
commonly used optional files.
* When using the DigiStudio program, please be sure to
select [Recommended].
[Custom] : Allows you to install only the components
you choose.
8. A window will open, asking you to choose a folder to which
program icons will be added. Click [Next >]. If you want to
add the program icons to a different folder, choose another
folder, and then click [Next >].
[Click !]
[Click !]
[Click !]
9. The Enter Registration window appears. 
Enter your name and organization in the respective fields,
and then click [Next >]. 
You do not have to enter a registration number.
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							97
Setting up the application software
13. Specify the file types you want to associate
with QuickTime. Click [Finish].14. Installation is complete. Click [Close]. 11. Set the transfer rate for downloading
content from the Internet, and then click
[Next >].12. Set up your browser for QuickTime plug-in.
Click [Next >].
The QuickTime program folder will appear.
Click on the Close button to close the folder.10. The QuickTime Settings - Introduction
window appears. Click [Next >].
[Click !]
[Click !]
[Click !][Click !]
[Click !][Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							98
Setting up the application software
16. The [Digimax Viewer 2.1] installation window will be
displayed as shown alongside. Click the [Next] button.
[Click !]
If you select [Cancel] at step 16, a window for installing MGI PhotoSuite III SE will be
displayed.
INFORMATION
15. A window where you can choose the program you want to
install will appear. Click [Install]. For information on
application software, please refer to page 94. * The QuickTime Player will launch, the readme file will open, and the Step 15 window will open.
Click on the Close 1 and Close 2 buttons to exit the program.
If you select [Cancel] , the application program installation will be cancelled.
17. The Software License Agreement window will be
displayed. If you agree to this, click [Yes], the window will
then move to the next step. If you disagree, click [ No ]
and the installation program will be canceled.
[Click !]
[Click !]
[Close 1
button][Close 2
button]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							99
Setting up the application software
22. A [Welcome] window will be displayed. 
Click the [Next >] button.
[Click !]
18. A destination selection window will open. Click [Next >].
To copy to the files to another folder, click [Browse (R)..]
and choose a folder you want.
19. A window will open, asking you to choose a folder to
which program icons will be added. Click [Next >].
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >].
[Click !]
[Click !]
20. Installation is completed. Click the [Finish] button and a
window for installing MGI PhotoSuite III SE will be
displayed.
* The computer will not restart even if I choose
Yes, I want to restart my computer now.
21. The [MGI PhotoSuite III SE] installation window will be
displayed as shown alongside. Click the [OK] button.
[Click !]
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							100
Setting up the application software
24. The [Choose Installation Type] window will open. 
Click [Next >].
[Full] : 
the program will be installed with all the options.
[Custom] : you can choose what you would like to install.
25. If installation is completed correctly, Autoplay is
registered automatically into the start menu program as
shown alongside. Click the [Next >] button.
26. The MGI Registration window will be displayed. 
Click the [Continue] button.
27. The [Online Registration Utility] window will be displayed.
Fill in the blanks and click the [Register] button.
[Click !]
[Click !]
[Click !]
[Click !]
23. The Software License Agreement window will be
displayed. If you agree to this, click [Yes], the window will
then move to the next step. If you disagree, click [No]
and the installation program will be canceled.
[Click !]
28. Installation is complete. 
Click the [Finish] button.
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals