Samsung Digimax U CA3 User Manual

91
Specifications
Type 1/2.7 CCD
Effective Pixel Approx. 3.2 Mega-pixel
Total Pixel Approx. 3.3 Mega-pixel
SHD Lens f = 5.8 ~ 17.4mm 
(35mm film equivalent : 38 ~ 114mm)
F No. F2.8 ~ F4.8
Still Image mode : 1.0X ~ 3.0X 
Play mode : 1.0X ~ 5.0X (depends on image size)
Optical ViewfinderReal image optical viewfinder
LCD Monitor 1.5 color TFT LCD
Type TTL auto focus
Normal : 80cm ~ infinity
Macro : 5 ~ 80cm (Wide), 50 ~ 80cm (Tele)
Type Mechanical and Electronic shutter
Speed 2 ~ 1/2,000 sec.(16 ~ 1/2,000...

92
Specifications
2048 : Super fine 17, Fine 33, Normal 50
2048P : Super fine 19, Fine 38, Normal 56
1600 : Super fine 27, Fine 54, Normal 82
1024 : Super fine 66, Fine 132, Normal 198
640 : Super fine 169, Fine 336, Normal 501
* These figures are measured under Samsung’s standard conditions and
may vary depending on shooting conditions and camera settings.
Single Image, Thumbnails, Slide Show, Movie Clip
Trimming, Rotating, Resizing
Digital output connector : USB 1.1
Audio : Mono
Video output : NTSC,...

93
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera. 
We cannot, however, be held responsible in any way for damage caused by...

94
Software Notes
QuickTime Player : The program for playing back QuickTime movies (.mov). It can also play
video files compressed with MPEG4 codec.
Digimax Viewer 2.1 : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor.  You can also copy,
move or delete the images and enlarge /downscale the image sizes with Digimax Viewer. This
software is only compatible with Windows.
MGI PhotoSuite III SE: Image editing program
You can edit or store...

95
Setting up the application software
To use this camera with a PC, install the application software first. 
After this has been done, the stored images in the camera can be moved to the PC and can be
edited by an image editing program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
Close other programs before installing the application software.
Before installing the application software, disconnect the USB...

96
Setting up the application software
5. The Software License Agreement window will open, asking
you to agree to the licensing. Use the button on the bottom
left to select the language of your choice, and then click
[Agree] to accept the license agreement. The installation will
proceed to the next stage. If you do not agree to the license
agreement, click [Disagree]. The installation will be canceled. 
If the language of your choice is not listed, please select
[English].
6. A window will open, asking...

97
Setting up the application software
13. Specify the file types you want to associate
with QuickTime. Click [Finish].14. Installation is complete. Click [Close]. 11. Set the transfer rate for downloading
content from the Internet, and then click
[Next >].12. Set up your browser for QuickTime plug-in.
Click [Next >].
The QuickTime program folder will appear.
Click on the Close button to close the folder.10. The QuickTime Settings - Introduction
window appears. Click [Next >].
[Click !]
[Click !]
[Click...

98
Setting up the application software
16. The [Digimax Viewer 2.1] installation window will be
displayed as shown alongside. Click the [Next] button.
[Click !]
If you select [Cancel] at step 16, a window for installing MGI PhotoSuite III SE will be
displayed.
INFORMATION
15. A window where you can choose the program you want to
install will appear. Click [Install]. For information on
application software, please refer to page 94. * The QuickTime Player will launch, the readme file will open, and the...

99
Setting up the application software
22. A [Welcome] window will be displayed. 
Click the [Next >] button.
[Click !]
18. A destination selection window will open. Click [Next >].
To copy to the files to another folder, click [Browse (R)..]
and choose a folder you want.
19. A window will open, asking you to choose a folder to
which program icons will be added. Click [Next >].
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >].
[Click !]
[Click !]...

100
Setting up the application software
24. The [Choose Installation Type] window will open. 
Click [Next >].
[Full] : 
the program will be installed with all the options.
[Custom] : you can choose what you would like to install.
25. If installation is completed correctly, Autoplay is
registered automatically into the start menu program as
shown alongside. Click the [Next >] button.
26. The MGI Registration window will be displayed. 
Click the [Continue] button.
27. The [Online Registration Utility]...