Samsung Digimax U CA3 User Manual

101
Setting up the application software
29. The Installation Wizard is finished now. Choose [Yes, I
want to restart my computer now], and then click [Finish]
to restart your PC. 
Choose  [No, I will restart my computer later], and then
click 
Finishto restart your PC later.
To proceed with the installation of DigiStudio (an
avatar creation program), choose [No, I will restart my
computer later].
30. After restarting the computer, connect the PC to the camera with the USB cable.
31. Turn the camera power...

102
Setting up the application software
If you have installed the camera driver, [Found New
Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found
New Hardware Wizard dialog box opens and a
window asking you to select a driver file may
appear. In this case, specify the [D:\Digimax U-
CA3\Win 98FE_SE Driver] folder on the supplied
software CD.
When connecting the camera to your PC, it is
recommended that you use an AC power adapter.
Before connecting the camera to the PC, You
should...

103
DigiStudio Installation guide
System Requirements for DirectX 8.1
1. If your PC does not have DirectX (version 8.1 or later) installed, follow the instructions provided
during the installation process to install DirectX.
2. If you are asked to confirm the installation of DirectX, click [Next >].
3. You will be asked to reboot after DirectX is installed.
Once the installation of DigiStudio is complete, be sure to reboot your PC.
System Requirements for QuickTime
1. In order to view 3D avatars you...

104
DigiStudio Installation guide
Cautions on the Graphic Card (VGA)
The DigiStudio software will not install on a PO with a graphic card that does not support 3D
acceleration and that has less than 8 MB video RAM. If the graphic card error screen appears
while using DigiStudio, please go through the following steps:
Depending on your graphics card, 3D avatars may not be supported.
Step 1: Go to My Computer Control Panel Display Settings, check the display type
and color palette settings.
Step 2: Set the...

105
DigiStudio Installation
DigiStudio is a 3D avatar creation program. You can store
3D avatar files on the camera and use one of the avatars as
the startup image.
Be sure to check the system requirements (p. 103) before
installing the program.
This software is available in the Windows version only.
Be sure to install the camera driver before transferring the
avatars to the camera. (See page 95.)
For instructions on how to use DigiStudio, please refer to
Help.
1. When the installation screen shown on...

106
DigiStudio Installation
6. The Software License Agreement window will appear, asking
you to agree to the licensing. Use the button on the bottom
left to select the language of your choice, and then click
[Agree] to accept the license agreement. The installation will
proceed to the next stage. If you do not agree to the license
agreement, click [Disagree]. The installation will be canceled.
If the language of your choice is not listed, please select
[English].
7. The Choose Destination Location window...

107
DigiStudio Installation
13. The [Connection Speed] window will open. Click [Next]. To choose another transfer rate, click
and select the desired transfer rate.
14. The Browser Plug-in window will open. Click [Next].
15. The File Type Association window will open. Click [Finish]. If you want to associate other file
formats with QuickTime, put a checkmark (V) besides the file formats you want.
16. The Finished window will open. Click [Close].
* The QuickTime Player will launch, the readme file will...

108
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start Settings] and click [Control Panel].
[Click !]
4. A window will open. Click the [OK] button and
the camera driver will be removed.5. Uninstallation is complete. 
Click the [Finish] button and the window
will disappear.
[Click !]
[Click !]
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window will
open. Click [Digimax U-CA3 Camera] and click the...

109
Removable Disk
To use this camera as a Removable Disk, install (p.95) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM 
100SSCAM) can be transferred to the PC.
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off.
We recommend that you should copy the...

110
Removing the removable disk
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the function lamp blinks, you have
to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with
the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the function lamp blinks, you have
to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware] icon on...