Samsung Dcs Lcd24b, Lcd12b, Std24b, Basic 12b, 7b KeySet User Guide

DISPLAY FEATURES
INTERACTIVE DISPLAY KEYSThe three keys below the display are substitutes for dedicated feature keys and
access codes. Pressing one of these keys has the same effect as pressing a
programmable key. These keys are called soft keys as their functions are not
fixed. They change to present you with the best options for that call condition.
The use of soft keys allows the programmable keys to be used for more DSS
and speed dial keys.
The SCROLL key is used to display options available to the...

AUTO TIMERDisplay keyset users may have the timer automatically start when they answer
incoming calls or after a short delay on an outgoing call.
 With the handset on-hook, press TRSF and then dial 110.
 Dial 31 to turn the auto timer on or 30 to turn it off.
 Press TRSF to store your selection.TIMER FUNCTIONDisplay keyset users may use this feature as a simple stopwatch.
 When the keyset is idle, press the TIMER button to start timing.
 Press the TIMER button again to stop timing.
 Read the...

To program a station name:
 Press TRSF and then dial 104.
 Enter the 11 character name using the procedure described in 
Alarm Re-
minder Messages
.
 Press TRSF to store the name.
MANAGING KEY ASSIGNMENTSYou can view your key assignments and add extenders to some of your pro-
grammable keys for easy one touch operation of frequently used features.
An extender is a number that makes an otherwise general key very specific.
Adding the digit “4” to a PA G E key defines this key for paging zone four....

WHAT IS ANI?ANI (Automatic Number Identification) is a feature offered by some telephone
service providers that provides the calling party’s telephone number. This ser-
vice is only available on E&M Tie Lines on a T1, digital trunk. ANI is similar to
Caller Identification (CID) but the format and information of the calling person is
different. CID uses FSK signalling and ANI uses DTMF signalling. Usually, with
ANI, a calling party’s identity is the Listed Directory Number (LDN) unless a
separate...

 Dial the trunk number.
 You may now answer the call by pressing ANS.
OR
You may use NND to view more information about this call.
OR
You can return to the idle condition by pressing IGNORE.
NOTES:
1. If you are on an intercom call or you have Automatic Hold turned off, you
must finish the existing call or place it on hold before inquiring.
2. If you inquire about an outgoing call, you will receive a [call no longer avail-
able] display.REVIEWING PAST CID/ANI CALLSThis feature allows you to review CID...

46
PERSONAL SPEED DIAL NUMBERS
CODE NAMETELEPHONE NUMBER
00 _________________________ _________________________
01 _________________________ _________________________
02 _________________________ _________________________
03 _________________________ _________________________
04 _________________________ _________________________
05 _________________________ _________________________
06 _________________________ _________________________
07 _________________________ _________________________
08...

     SYSTEM ACCESS CODES
LINE GROUPS PROGRAMMED MESSAGES9 LOCAL/LCR 01 IN A MEETING
80 _____________________________ 02 OUT ON A CALL
81 _____________________________ 03 OUT TO  LUNCH
82 _____________________________ 04 LEAVE A MESSAGE
05 PAGE MESTATION GROUPS
06 OUT OF TOWN
07 IN TOMORROW
501 _____________________________ 08RETURN AFTERNOON
502 _____________________________ 09 ON VACATION
503 _____________________________ 10 GONE HOME
504 _____________________________ 11 _____________________________
12...