Samsung Dcs 400si Falcon Keyset User Guide

BUSY STATION CALLBACKWhen you call another station and receive a busy signal:
• Press the CBKkey or dial 44.
• When the busy station becomes free, your keyset will ring. 
• Lift the handset or press ANS/RLSto call the now idle station.
NOTES:
1. A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your CBKkey will light.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKERkey before dialing.BUSY STATION CAMP-ONWhen...

17
CALL PROCESSING
SYSTEM HOLD• When you are connected to any call, press HOLD. The call will flash
green at your keyset. If this call appears on a line key at other keysets,
it will flash red at those keysets.
• To take the caller off hold, press that key and the green flashing light will
go steady green again. Resume the conversation. 
NOTE: While on a call, pressing a line key, route key or flashing CALLbut-
ton will automatically put your first call on hold and connect you to the new
call. See...

line when the called station hangs up or you can press TRANSFERto
return to the outside party. If you wish to send the call to another exten-
sion without waiting for the first station to hang up, simply press anoth-
er DSSbutton. OR
Press the CALLbutton or C.O. line key to return to the outside party and
begin the transfer process again. 
When you are transferring a call to a keyset set for Voice Announce or Auto
Answer, the transferred call will always ring.
NOTES:
1. After the inside party answers,...

21
FORWARDING CALLS You may forward your calls to another station, group of stations or an exter-
nal telephone number. Program a destination for the type of forwarding you
want as detailed below. If you have FWD ALL, FWD BUSYand FWD NO
ANSWERkeys, press one to turn that forward feature on. A steady red light
reminds you what forward condition is activated.
You can clear all call forward conditions set at your station by lifting the hand-
set and dialing 600.FORWARD ALL CALLSTo forward all your calls...

FORWARD DNDTo forward your phone when you activate DND.
• Dial 607plus the extension number or group number.
• Receive confirmation tone and hang up.
NOTE:
1. If the Hot Keypad feature has been turned off you must first lift the hand-
set or press the SPEAKERkey before you begin dialing.CALL FORWARD OPTIONSA display keyset may review or change call forward options and destina-
tions. Call forward access can be done via the keypad or by accessing the
keyset display features. To review or change call...

25
DIALING FEATURES
SPEED DIALING You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–999 or from your personal list of numbers
00–49:
• With the handset on-hook, press the MEMORYkey or dial 16.
• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKERkey before you begin dialing.PROGRAMMING PERSONAL SPEED
DIAL...

• The Akey is not used.
• The Bkey inserts a flash.
• The Ckey inserts a pause.
• The Dkey is used for pulse to tone conversion. If your system uses
rotary (or pulse) dialing C.O. lines, pressing Dwhile entering a speed
dial number causes all subsequent digits to be sent as DTMF tones.
• The Ekey is used to hide digits. Display keyset users may want to hide
some speed dial numbers so that they will not show in the display. When
you are entering a telephone number, press E. All subsequent digits will
be...

29
NOTES:
1. If you make another call, auto-redial is canceled. 
2. To cancel a retry, lift and replace the handset.PULSE TO TONE CHANGEOVERWhen making an outside call on a dial pulse line, press #. All digits dialed
after the # with be sent as tones.MEMO REDIALINGWhen you are calling directory information, you can store the number you
are given using the SAVEfeature. There is no need for pencil and paper.
• While you are talking on an outside call, press SAVE.
• Dial the telephone number as it is...

To retrieve an automatically parked call:
• Dial 10plus the number that was announced. If you have a PAGPKkey,
press it and dial the number that was announced. If you have a PARK
key, press it and dial the announced orbit number.
• You will be connected to the parked call.
NOTES:
1. If the call is not retrieved within a pre-programmed period of time, it will
recall your keyset and have a slow flashing amber light. You cannot park
and page intercom calls.
3. If the Hot Keypad feature has been turned off,...

33
CONVENIENCE FEATURES
DO NOT DISTURBUse this feature when you want to block calls to your keyset.
• While on-hook, press the DNDkey or dial 401. The DNDkey lights
steady red to remind you of this mode.
• To cancel DND, press the DNDkey again or dial 400. The DNDlight
turns off. You can make calls while in the DND mode.
NOTES:
1. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKERkey.
2. If you place your keyset in DND mode and you do not have a DNDkey,...