Samsung Dcs 400si Falcon Keyset User Guide

SAMSUNG DCS 400si SYSTEM
June 2001
FALCON 
KEYSET USER GUIDE
Every effort has been made to eliminate errors and ambiguities in the information contained in this
guide. Any questions concerning information presented here should be directed to SAMSUNG TELE-
COMMUNICATIONS AMERICA, 2700 N.W. 87th Avenue, Miami, FL 33172, telephone (305) 592-2900.
SAMSUNG TELECOMMUNICATIONS AMERICA disclaims all liabilities for damages arising from the
erroneous interpretation or use of information presented in this guide. 

TABLE OF CONTENTS
ABOUT THIS BOOK
..........................................................1
THINGS YOU SHOULD KNOW
............................2–9
ASSEMBLING YOUR KEYSET
................................10
ADDING A KEYSET DAUGHTERBOARD
MODULE
..............................................................................11
OUTSIDE CALLSMaking an Outside Call ....................................................................12
Answering an Outside Call...

Off-Hook Voice Announce ................................................................37
OHVA Block ......................................................................................38
OHVA Reject ......................................................................................38
In Group/Out of Group ......................................................................38CUSTOMIZING YOUR KEYSETAME BGM...

ABOUT THIS BOOK
Your FALCON keyset is the most visible part of your telephone system. No
matter what model keyset you are using telephone calls are handled the
same way. The 28B and 18B keysets have additional conveniences that are
not available to 8B keyset users. These are noted throughout this guide.
Please take the time to study this guide and to become familiar with the op-
eration of your keyset. Keep this guide handy. You may need to look up in-
structions for infrequently used features.
Learning...

3 Your outside calls will light green on your keyset and red on other keysets.
You never lose sight of your calls while they are on hold. They stay right
where you put them and are identified with a green flashing light.
Some simple rules to remember:
• Any steady LED indicates the line or feature is in use.
• A fast flashing green LED indicates a new call ringing in.
• A slow flashing green or red LED indicates a call is on hold.
• A slow flashing amber LED indicates a recall to your keyset....

5
28 BUTTON FALCON KEYSET
Scroll
Call 1 Call 2 Message
Memory Redial
Transfer Speaker
HOLDANS/RLS
Volume12
ABC
3DEF
4GHI
5JKL
6MNO
7PQRS
8TUV
9WXYZ
0OPER
FALCON 28B
32 CHARACTER DISPLAY
Two lines with 16 characters each.
TERMINAL STATUS INDICATOR
Used to provide your keyset status.
SOFT KEYS
Used to acti-
vate features
via the display.
SCROLL KEY
Used to scroll
through dis-
plays.
20 PROGRAMMABLE KEYS
WITH TRI-COLORED LIGHTS
Used for CALL buttons, intercom
calls, outside lines and many other
system...

7
8 BUTTON FALCON KEYSET
Scroll
HOLDANS/RLS
12
ABC
3DEF
4GHI
5JKL
6MNO
7PQRS
8TUV
9WXYZ
0OPER
Call 1 Call 2
Message Transfer
Speaker VOLUMEFALCON 8B
32 CHARACTER DISPLAY
Two lines with 16 characters each.
TERMINAL STATUS INDICATOR
Used to provide your keyset status.
SOFT KEYS Used to
activate features via the
display.
SCROLL KEY Used to
scroll through displays.
8 PROGRAMMABLE KEYS WITH
TRI-COLORED LIGHTS Used to
call stations directly, to indicate
busy conditions of other stations,
for One Touch dialing...

KEYSET DAUGHTER MODULES[28 AND 18 BUTTON KEYSETS ONLY]
Falcon 28 and 18 button keysets can have one of three different types of
daugher module installed on them to enhance the operation of the keyset or
to provide an additional local port depending on the type of module.FALCON KDB-DIGITAL LINE 
INTERFACE (FKDBD)If your keyset is connected to a Digital Line Interface (DLI) port that supports
2B+D operation (your installing company can determine this) you may
install a daughter module that provides a...

11
ADDING A KEYSET 
DAUGHTERBOARD MODULE
• Place the keyset face down on a flat surface.
• Remove the base pedestal by placing your thumbs over the attachment
clips and press outward while simultaneously pressing down on the key-
set body with your fingertips.
• Remove the two knockouts from the bottom of the keyset.
• Plug in the daughter module and secure with the two screws provided.
10
ASSEMBLING YOUR KEYSET
• Place the keyset face down on a flat surface.
• Remove the base pedestal by placing your...

RECALL DIAL TONEPress the NEWbutton to disconnect your existing call, wait for dial tone and
then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the FLASHkey may
be programmed to recall dial tone. SENDING A FLASHWhile on an outside call, press the FLASHkey to send a flash to the tele-
phone company. This is required for some custom calling features or CEN-
TREX use.
NOTE: Flash is not available on an ISDN circuit.BUSY LINE QUEUING WITH CALLBACKIf you receive a busy...