Samsung CLX 6250FX User Manual

Supplies and accessories_ 4
the paper transfer belt. 
• Be careful not
  to scratch the surf ace of the paper transfer belt.
5. Hold
ing the handle on the new paper tran sfer belt, align it with the slots 
on the inside of the front door.
6. Lower the paper transfer belt until it is parallel with the front door and 
firmly seated.
7.Close the front door to resume printing.
 
If the front door is not complete ly closed, the machine will not 
operate. 
Necessary precautions to take when installing...

Supplies and accessories_ 5
Installing a memory module
1.Turn the machine off and unplug all cables from the machine.
2. Remove the screws and remove the rear cover.
3.Remove the screws, then lift up the  cover slightly and pull the cover to 
the right.
1 Control board 
cover
4. Remove the new memory module from its bag. 
5. Hold
ing the memory module by the edges, align the memory module in 
the slot at about a 30-degree angle.  Make sure that the notches of the 
module and the grooves on the slot fit...

Supplies and accessories_ 6
If you enter the incorrect password,  Invalid Password 
appears. Reenter the correct password.
5. Pre
ss the left/right arrow until t he desired setting appears and press 
OK .
• Ca
ncel:  You can delete a file from the queue.
• Promote:  You can select a job waiting in the active job queue and 
cha

nge its print order so th at it can be printed sooner.
• Re
lease:  You can print a job scheduled to   be printed at a specified 
time immediately. In this case, the job currently...

1Connector
2Wireless interface card
Supplies and accessories _ 7
8.Install the control board cover wi th the screws removed in step 3.
9.Install the rear cover with  the screws removed in step 2.
10. Plug al
l the cables back into the machine, and turn the machine on.
11.Set 
the wireless network environment.
 For information about configuring and using the printer on a 
wireless network environment, refer to the Wireless network install 
guide provided with the wireless network interface card. You can...

Supplies and accessories_ 8
-Open System: Authentication is not used, and encryption may 
or may not be used, depending on the need for data security. 
Enter the  WEP Key  using number keypad after selecting 
Open System  and then press  OK.
-SharedKey : Authentication  is u
 sed. A device that has a proper 
WEP Key  can access the network. Enter the  WEP Key using 
number keypad after selecting  SharedKey and then press 
OK .
• WPA-PSK  or
  WPA2-PSK : You can select  WPA-PSK or 
WPA2-PSK  to...

Supplies and accessories_ 9
1.Press Menu on the control panel.
2.Press the up/down arrow to highlight System Setup and press OK.
3.Press the up/down arrow to highlight Job Management and press 
OK.
4.Press the up/down arrow to highlight Stored Job and press OK.
5.Press the up/down arrow to highlight the user’s name and file name 
you want use and press OK.
 If the select file is a confidential print job, enter the specified 
4-digit password.
Use the up/down arrow to enter digits and use the left/right...

Supplies and accessories_ 10
same name when you enter a new file name, the file will be 
saved as a different name that is automatically programmed.
•Overwrite : You can set the machine to delete previous job 
information on hard disk drive (HDD) as you store new job 
information.
6.Press OK.
Deleting residual image data
Image Overwrite is a security measure for customers who are 
concerned about unauthorized access and duplication of classified or 
private document.
1.Press Menu on the control panel....

Specifications_ 1
1.specifications
This chapter guides you about th is machine’s specifications.
This chapter includes:
•Hardware specifications
• Environmental specifications
• Electrical specifications
• Print media specifications
  
 The specification values are listed below, specific ation are subject to change without notice. See www.samsung.com/printer for possible changes in 
information.
Hardware specifications
ItemDescription
Dimension Height 651 mm (25.63 inches)
Depth 498 mm (19.61 inches)...

Specifications_ 2
Power consumptionAverage operating mode•CLX-6220 Series: Less than 550 W
•CLX-6250 Series: Less than 580 W
Ready mode•CLX-6220 Series: Less than 33 W
•CLX-6250 Series: Less than 38 W
Power save mode•CLX-6220 Series: Less than 11 W
•CLX-6250 Series: Less than 13 W
Power off modeLess than 1 W
a. See the rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine.
ItemDescription
Downloaded From ManualsPrinter.com Manuals 

Specifications_ 3
Print media specifications
TypeSizeDimensionsPrint media weightb
a
a. If media weight is over 105 g/m2 (28 lb bond), load a paper into  the multi-purpose tray one by one. /Capacity
Plain paper Letter 216 x 279 mm (8.5 x 11 inches)
70 to 90 g/m
2 (19 to 24  lbs bond) 
• 2
50 sheets of 80 g/m2(20 lbs 
bond) for tray1
• 5
00 sheets of 80 g/m2(20 lbs 
bond) for optional tray. 70 to 90
 g/m
2 (19 to 24  lbs bond) 
• 10
0 sheets of 80 g/m2(20 lbs bond)
Legal
216 x 356 mm (8.5 x 14 inches)
US...