Samsung CLX 6250FX User Manual

Management tools_ 6
•Properties:  Allows you to change the scan properties and scan a 
documen
t. 
Ports configuration
In this window, you can view the list of available ports, check the status of 
each port and release a port that is st alled in a busy state when its owner 
has terminated the job for any reason.
 
1Switches to  Ports configuration .
 
2Shows all of the available ports.
 
3Shows the port type, device connected to the port, and status.
•Refresh:  Renews the available ports list.
• Releas...

Maintenance_ 1
1.maintenance
This chapter provides information for main taining your machine and the toner cartridge.
This chapter includes:
•Printing a machine report
• Monitoring the supplies life
• Adjusting the color contrast
• Finding the serial number •
Using Toner Low Alert
• Cleaning a machine
• Storing the toner cartridge
• Tips for moving & storing your machine
  
Printing a machine report
You can print the machines information and job report.
1.Pr
ess  Menu on the control panel.
2. Pre
ss the...

Maintenance_ 2
1.Press  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Maintenance and press OK.
4. Pre
ss the up/down arrow to highlight  Serial Number and press OK.
5. Check your machin
 e’s serial number.
6. Pr
ess  Stop/Clear to return to ready mode.
Using Toner Low Alert
If toner in the cartridge has run out, a message informing user to change the 
toner cartridge appears. You can set  the option for this...

Maintenance_ 3
5.With a dry, lint-free cloth, wipe away any dust and spilled toner from the 
toner cartridge area.
 
While cleaning the inside of the machine, be careful not to damage 
the transfer roller or any other in side parts. Do not use solvents 
such as benzene or thinner to clean. Printing quality problems can 
occur and cause damage to the machine.
6. Locate the lon
 g strip of glass (LSU) inside the machine and using a 
cotton swab, gently clean  the 4 pieces of LSU glass.
7.Slide the toner...

1Scanner lid
2Scanner glass
3Document feeder 
glass
4White bar
Maintenance _ 4
4.Wipe the underside of the scanner lid and white sheet until it is clean 
and dry.
5. Close
 the scanner lid.
Storing the toner cartridge
Toner cartridges contain components that  are sensitive to light, temperature 
and humidity. Samsung suggests users follow the recommendations below 
to ensure the optimum performance,  highest quality and longest life from 
your new Samsung toner cartridges.
Store this cartridge in the...

Troubleshooting_ 1
1.troubleshooting
This chapter gives helpful information fo r what to do if you encounter an error.
This chapter includes:
•Redistributing toner
• Clearing original document jams
• Tips for avoiding paper jams •
Clearing paper jams
• Understanding display messages
• Solving other problems
  
Redistributing toner
When the toner cartridge is near the end of its life:
•Whi
te streaks or light printing occurs. 
•The
 toner-related message saying that the toner is low may appear on 
the...

Troubleshooting_ 2
place completely.
5.Close the front door. Ensure that the cover is securely closed. 
 
If the front door is not complete ly closed, the machine will not 
operate. 
Clearing original document jams
When an original jams while passing through the document feeder, a 
warning message appears on the display screen.
 
To avoid tearing the document, re move the jammed document slowly 
and gently.
 To prevent document jams, use the  scanner glass for thick, thin, or 
mixed paper-type...

1scanner lid
Troubleshooting _ 3
3.Close the scanner lid. Load the removed pages back into the document 
feeder.
Tips for avoiding paper jams
By selecting the correct media type s, most paper jams can be avoided. 
When a paper jam occurs, refer to the next guidelines. 
• Ensure that th
 e adjustable guides are positioned correctly (See  Loading 
paper in the tray on page  3 ).
Do not overload the tray. Ensure that  the
  paper level is below the paper 
capacity mark on the inside of the tray.
• Do not...

Troubleshooting_ 4
1.Pull out optional tray  2.
2. Remove the jammed
  paper by pulling in the direction shown. To avoid 
tearing the paper, pull it  out gently and slowly.
If the paper does not move when you pull or if you do not see the paper 
in this area, stop and go to the next step.
3. Pull tray  1 half-way out.
4. If yo
u see the jammed paper, remove the paper from the machine by 
gently pulling it straight out.
5. In
sert the trays back into the mach ine. Printing automatically resumes.
In the...

Troubleshooting_ 5
2.Press the green release handle to release the paper transfer belt. 
Holding the handle on the paper transfer belt, lift it out of the machine.
3.Remove the jammed paper by pulling in the direction shown. To avoid 
tearing the paper, pull it  out gently and slowly.
4.Holding the handle on the paper transfer belt, align it with the slots on 
the inside of the front door.
5. Lower the paper transfer belt until it is parallel with the front door and 
firmly seated.
6.Close the front door...