Samsung CLX 2160 User Manual

iv
Downloaded From ManualsPrinter.com Manuals 

1.1   
1 Introduction
Thank you for purchasing this  Samsung multifunctional product. Your 
machine provides printing, copying, scanning functions.
This chapter includes:
• Special features
• Machine overview
• Finding more information
• Selecting a location
• Printing a demo page
• Altitude adjustment
Special features
Your new machine is equipped with special features.
Print with excellent quality and speed • You can print in full range of colors using cyan, 
   
magenta, yellow, and black.
•
You can...

1.2   
Machine overview
These are the main components of your machine:
Front view
1 scanner lid8 tray 
2 scanner glass9 manual feeder
3 USB memory port10 manual feeder paper 
width guides
4 front cover11 waste toner container
5handle12 toner cartridges
6 control panel13 imaging unit
7 output support14 scan unit
Note
The surface of the output tray may become hot if you print a 
large number of pages at once. Please make sure that you don’t 
touch the surface, and prevent children from approaching it.
*...

1.3   
Control panel overview          
1Display: Shows the current status and prompts during an operation.8 ID Copy
: You can copy both sides of the ID Card like a driver’s 
license to a single side of paper. See page 6.3.
2
To n e r  c o l o r s: The toner colors shown below the LCD display co-
works with display messages.  See Status LED with the toner 
cartridge messages on page 1.4.
9 USB Print
: Allows you to directly print files stored on a USB flash 
drive when it is inserted into the USB port...

1.4   
Understanding the Status LED
The  Status  LED on the control panel shows the status of your machine. 
See the table below to know your machine’s status.
Status LED
StatusDescription
Off • The machine is off-line.
• The machine is in Power Save mode. When 
data is received, or 
Black Start or  Color Start   
button was pressed, it switches to on-line 
automatically.
Green Blinking • When the backlight slowly blinks, the machine 
is receiving data from the computer.
• When the backlight fast...

1.5   
Finding more information
You can find information for setting up and using your machine from the 
following resources, either printed or onscreen.
Quick Install GuideProvides information on setting up your 
machine and, therefore, be sure to follow the 
instructions in the guide to get the machine 
ready.
Online 
User’s Guide Provides you with step-by-step instructions for 
using your machine’s full features, and 
contains information for maintaining your 
machine, troubleshooting, and installing...

1.6   
Printing a demo page
Print a demo page to make sure that the machine is operating correctly.
To print a demo page:
In ready  mode, press and hold the OK  button for about 2 seconds.
Altitude adjustment
The print quality is affected by atmospheric pressure, which is 
determined by the height of the machine above sea level. The following 
information will guide you on how to set your machine to the best print 
quality or best quality of print.
Before you set the altitude value, find the altitude...

2.1   
2 System setup
This chapter gives you an overview of menus available on your machine 
and step-by-step instructions for setting up the machine’s systems.
This chapter includes:
• Menu overview
• Changing the display language
• Using the power save mode
• Auto continue
Menu overview
The control panel provides access to various menus to set up the 
machine or use the machine’s functions. These menus can be accessed 
by pressing  Menu. Refer to the following diagram. Menus available in 
Copy or Scan...

2.2   
Changing the display language
To change the language that appears on the control panel, follow these 
steps:
1 Press  Menu until Copy Menu  appears on the bottom line of the 
display and press  OK.
2
Press the Scroll buttons until System Setup appears and press OK.
3Press the Scroll buttons until Machine Setup appears and press OK.
4Press the Scroll buttons until Language appears and press OK.
5Press the Scroll buttons until the language you want appears and 
press 
OK.
6Press Stop/Clear to...

3.1   
3 Software overview
This chapter gives you an overview of the software that comes with your 
machine. Further details about installing and using the software are 
explained in the  Software Section .
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
You must install the printer and scanner software using the supplied CDs 
after you have set up your machine and connected it to your computer. 
Each CD provides you with the following...