Samsung CLP 550 User Manual

USING YOUR PRINTER ON A NETWORKE.7
E
• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DLC/LLC: Data Link Control/Logical Link Control
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Printing a Network Configuration Page
The Network Configuration page shows how the network 
interface card on your printer is configured. The default settings 
which are suitable for most applications are enabled. 
1In ready mode...

USING YOUR PRINTER ON A NETWORKE.8
7Press the Enter button ( ) to save the selection.
8Press the On Line/Continue button ( ) to return to 
ready mode.
Configuring TCP/IP
Your printer can be set up on a variety of TCP/IP networks. There 
are several ways in which your printer can be assigned a TCP/IP 
address, depending on your network.
• Static Addressing: TCP/IP address is assigned manually by 
the system administrator.
• Dynamic Addressing BOOTP/DHCP(default): TCP/IP address 
is assigned automatically...

USING YOUR PRINTER ON A NETWORKE.9
E
10Press the Upper Level button ( ), then use the scroll 
button ( ).
11Press the Enter button ( ) to access the IP Address 
menu.
An IP address consists of 4 bytes. 
12Press the scroll button (  or  ) to enter a number 
between 0 and 255 and press the Enter button ( ).
13Repeat Step 12 to complete the address. You must enter 
number for each of the 4th bytes.
14To select other parameters, such as the Subnet Mask or 
Gateway, press the scroll button (  or  ). Press the...

USING YOUR PRINTER ON A NETWORKE.10
4Press the Upper Level button ( ), then use the scroll 
button ( ).
5Press the Enter button ( ) when ‘Config TCP’ displays.
6Press the scroll button (  or  ) to display ‘Yes’ and press 
the Enter button ( ).
7Press the Upper Level button ( ), then use the scroll 
button ( ).
8Press the Enter button ( ) when ‘IP Get Method’ displays.
9Press the scroll button (  or  ) to display ‘DHCP’ and 
press the Enter button ( ).
10To assign the address from the BOOTP server, press...

USING YOUR PRINTER ON A NETWORKE.11
E
Take the following steps to change the frame type format:
1In ready mode press the Menu button ( ) until you see 
‘Network’ on the bottom line of the display. Press the Enter 
button ( ) to access the menu.
2Press the Enter button ( ) when ‘Config Network’ displays 
on the bottom line.
3Press the scroll button (  or  ) to display ‘Yes’ on the 
bottom line. Press the Enter button ( ). 
4Press the Upper Level button ( ).
5Press the scroll button (  or  ) until...

USING YOUR PRINTER ON A NETWORKE.12
Restoring the Network Configuration
You can return the network configuration to its default settings.
1In ready mode press the Menu button ( ) until you see 
‘Network’ on the bottom line of the display. 
2Press the Enter button ( ) to access the menu.
3Press scroll button (  or  ) until ‘Default Set’ displays on 
the bottom line.
4Press the Enter button ( ) to confirm the selection. 
Configuring the Wireless Network 
See the instructions supplied with the optional...

USING YOUR PRINTER ON A NETWORKE.13
E
You can configure the following items:
•SSID: When you select 'Search List', the wireless network 
card on your printer searches for wireless networks in the 
area and displays the results on a list. Select one from the 
list. You cannot change ‘Operation Mode’ and ‘Channel’. If you 
select ‘Custom’ from the list, you can configure the wireless 
settings according to your needs and enter a name of up to 
32 letters for your ‘Custom’ setting. ‘SSID’ is case...

USING YOUR PRINTER ON A NETWORKE.14
- Key Type: Select the key type of your network.
- Key 1, Key 2, Key 3, Key 4: Enter the key number for 
“Encryption”. The numbers you can enter are as follows:
Hexadecimal Alphanumeric
64-bit WEP 10 digits 5 characters
128-bit WEP 26digits 13 characters
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 

F
Your printer is a full-featured laser printer that has been 
optimized to meet most of your printing needs. Recognizing 
that each user may have different requirements, however, 
Samsung makes several options available to enhance your 
printer’s capabilities.
This chapter includes:
• Installing Printer Memory
• Installing a Network Interface Card
• Installing an Optional Tray
INSTALLING PRINTER 
O
PTIONS
*ownloadedMKromM~anualsPrinter9comM~anuals 

INSTALLING PRINTER OPTIONSF.2
Installing Printer Memory
Your printer has the dual in-line memory module (DIMM) slot. 
Use this DIMM slot to install more memory for the printer.
Note: Your printer has 64 MB (128 MB for the CLP-550N) of 
memory which can be expanded to 320 MB (384 MB for the 
CLP-550N). Use only a Samsung-approved DIMM, part number 
ML-00MC (64 MB), ML-00MD (128 MB), or ML-00ME (256 MB). 
Contact your Samsung dealer.
CAUTION: Static electricity can damage DIMMs. When handling a 
DIMM,...