Samsung CLP 325 User Manual

							Getting started_ 31
window will appear.
•Check if you want to install the software without connection 
of the printer.
-Check this option
  to install this program without a machine 
connected. In this case, the pr int a test page window will be 
skipped, and completes the installation.
• Se
arch again
When you press this button,  
 the firewall notice window 
appears.
-Tu
rn off the firewall and  Search again. For Window operating 
system, click  Start > Control Panel  > Windows Firewall , 
and inactivate this option. Fo r other operating system, refer 
to its on-line guide.
-Tu
rn off the firewall from the third partys program beside the  operating system. Refer to  the manual provided by 
individual programs.
• Direc
t Input
The  Dir
ect Input  allows you to search a specific machine on 
the network.
-Sear
ch by IP address : Enter the IP address or the host 
name. Then click  Next.
To verify your machine’s IP address, print a network 
co
 nfiguration report (See  Printing a machine report on 
page  72 ).
-Sear
ch by network path : To find a shared machine (UNC 
Path), enter the shared name manually or find a shared 
printer by clicking the Browse  button. Then click Next.
• He
lp
If your machine is not connected to the computer or network, 
Th
is help button gives you the detailed information about how 
to connect the machine.
5. The
 searched machines will be shown on the screen. Select the one you 
wish to use and click  Next.
 If the driver searched only one  machine, the confirmation window 
appears.
6. After th
e installation is finished, a window asking you to print a test page 
appears. If you want to print a test page, click  Print a test page.
Otherwise, just click  Next an
 d skip to step 8.
7. If 
the test page prints out correctly, click  Yes.
If not, click  No 
 to reprint it.
8. If you
 want to register your  machine on Samsung website, click  On-line 
Registration .
 If your machine is not connected yet to the computer, click  How to 
connect? . How to connect?  gives detailed information about 
how to connect the machine. Follow the instructions in the window.
9. Click  Fi
nish .
 If the printer driver does not work properly, follow the steps below to 
repair or reinstall the driver. 
a)Make
 sure that the machine is connected to your machine and 
powered on.
b) Fro
m the  Start menu, select  Programs or All Programs  > 
Samsung Printers  > your printer driver name  > Maintenance .
c)Sele
ct the option you wish to execute,  then follow the instruction on 
the window.
Macintosh
The software CD that came with your machine provides you with the Driver 
files that allow you to use the CUPS  driver or PostScript driver (only 
available when you use a machine, whic h supports the PostScript driver) for 
printing on a Macintosh computer. 
1. Make
 sure that the machine is connected to your computer and powered 
on.
2. Inse
rt the supplied software CD into your CD-ROM drive.
3.D
ouble-click the CD-ROM icon that  appears on your Macintosh desktop.
4. D
ouble-click the  MAC_Installer folder.
5. D
ouble-click the  Installer OS X icon.
6. En
ter the password and click  OK.
7. T
he Samsung Installer window opens. Click  Continue.
8. R
ead the license agreement and click  Continue.
9. Click  Agre
 e to agree to the license agreement.
10. Select  Ea
 sy Install and click  Install. Easy Install  is recommended for 
most users. All components necessa ry for machine operations will be 
installed. 
If you select  C
 ustom Install, you can choose individual components to 
install.
11. When
 the message which warns that all applications will close on your 
computer appears, click  Continue.
12. Se
lect the installation  type you want and click OK.
• Ty
pical installation for a local printer:  Installs default components 
fo
r a device that is directly  connected to user’s computer.
• Ty
pical installation  for a network printer:  Installs software for a 
device
 that is on the network. The SetIP program automatically runs. 
If the machine has already configur ed network information, close the 
SetIP program. Go to the next step.
• W
ireless Setting and Installation :  For CLP-325W(K)/CLP-326W, 
you can access  W
ireless Setting and Installation  menu. The 
Wireless Setting and Installation  allows you to install a wireless 
network to connect to the machine with USB cable (See  Setting a 
wireless network with USB cable on page  41).
13. F
ollow the instructions on the screen to  complete the installation. After 
the installation is  finished, click Quit or Restart .
14. Open the  Appl
 ications folder >  Utilities > Print Setup Utility .
• Fo
r Mac OS X 10.5 ~ 10.6, open the  Applications folder > System 
Preferences  and click Print & Fax .
15. Click  Add o
 n the Printer List .
• F
or Mac OS X 10.5 ~ 10.6, click the “ +” icon; a display window will 
pop-up. 
16. F
or Mac OS X 10.3, select the  USB tab. 
• For 
Mac OS X10.4, click  Default Browser and find the USB 
Downloaded From ManualsPrinter.com Manuals 
						

							Getting started_ 32
connection.
• F
or Mac OS X 10.5 ~ 10.6, click  Default and find the USB connection.
17. For Mac OS X 
 10.3, if Auto Select  does not work properly, select 
Samsung  in Printer Model  and your machine name in  Model Name.
• F
or Mac OS X 10.4, if Auto Select does not work properly, select 
Samsung  in Print Using  and your machine name in  Model. 
• For Mac 
OS X 10.5 ~ 10.6, if Auto Sele ct does not work properly, select 
Select a driver to use...  and your machine name in  Print Using. 
Your machine appears on the  Printer List, 
 and is set as the default 
machine.
18. Click  Add.
 If the printer driver does not work properly, uninstall the driver and 
reinstall it. 
Follow steps below to uninstall the driver for Macintosh.
a)Ma
ke sure that the machine is connected to your computer and 
powered on.
b) In
sert the supplied software CD into your CD-ROM drive.
c)Do
uble-click CD-ROM icon that app ears on your Macintosh desktop.
d) Doub
le-click the  MAC_Installer folder.
e) Doub
le-click the  Installer OS X icon.
f) Enter th
e password and click  OK.
g) The
 Samsung Installer window opens. Click  Continue.
h) Read
 the license agreement and click  Continue.
i) Click  Agr
ee  to agree to the license agreement.
j) S
elect  Uninstall  and click Uninstall . 
k) W
hen the message which warns that all applications will close on 
your computer appears, Click  Continue.
l) Whe
n the uninstall is done, click  Quit.
Linux
You need to download Linux software packages from the Samsung website 
to install the printer software. 
Follow the steps below to install the software.
Installing the Unified Linux Driver
1.Make sure that the machine is connected to your computer and 
powered on.
2. W
hen the  Administrator Login  window appears, type in root in the 
Login  field and enter t he system password.
 You must log in as a super user  (root) to install the machine 
software. If you ar e not a super user, ask your system 
administrator.
3. From th
e Samsung website, download the Unified Linux Driver 
package to your computer.
4. Righ
t-click the  Unified Linux Driver  package and extract the 
package. 
5. Doub
le click  cdroot > autorun . 6.
W
hen the welcome screen appears, click  Next.
7.When the installation is complete, click  Finish.
The installation program added the Un ifie
 d Driver Configurator desktop 
icon and the Unified Driver group to the system menu for your 
convenience. If you have any difficulties, consult the on screen help that 
is available through your system menu or from the driver package 
Windows applications, such as  Unified Driver Configurator.
Installing the Smart Panel
1.Make sure that the machine is  connected to your computer and 
powered on.
2. W
hen the  Administrator Login window appears, type in root in the 
Login  field and enter the system password.
 You must log in as a super user (root) to install the machine 
software. If you are not a s uper user, ask your system 
administrator.
3. F
rom the Samsung website, download the  Smart Panel package to 
your computer.
4. R
ight-click the Smart Panel package and extract the package. 
5.D
ouble click  cdroot > Linux  > smartpanel  > install.sh .
Installing the Printer Settings Utility
1.Make sure that the machine is  connected to your computer and 
powered on.
2. W
hen the  Administrator Login window appears, type in root in the 
Login  field and enter the system password.
 You must log in as a super user (root) to install the machine 
software. If you are not a s uper user, ask your system 
administrator.
3. F
rom the Samsung website, download the Printer Settings Utility 
package to your computer.
4. R
ight-click the  Printer Settings Utility  package and extract the 
package. 
5. D
ouble click  cdroot > Linux  > psu  > install.sh .
 If the printer driver does not work  properly, uninstall the driver and 
reinstall it. 
Follow the steps below to uninstall the driver for Linux.
a) Ma
ke sure that the machine is connected to your computer and 
powered on.
b) W
hen the Administrator Login  window appears, type in “root” 
in the  Login field and enter the system password.
You must log in as a super user (root) to uninstall the printer 
driver. If you are 
 not a super user, ask your system 
administrator.
Downloaded From ManualsPrinter.com Manuals 
						

							Getting started_ 33
c)Click the icon at the bottom of the desktop. When the Terminal 
screen appears, type in:
[root@localhost root]#cd  /opt/Samsung/mfp/u
 ninstall/
[root@localhost uninst a
 ll]#./uninstall.sh
d) Click  Un
install .
e) Click  Nex
 t. 
f) Cl
ick  Finish.
Sharing your machine locally
Follow the steps below to set up computers to share your machine locally.
If the Host computer is directly conne cte
 d to the machine with a USB cable 
and is also connected to the local ne twork environment, the client computer 
connected to the local network can use the shared machine through the 
host computer to print. 
21
 
1Host computer A computer which is directly connected to 
the 
machine by USB cable.
 
2Client computers Computers which use the machine shared 
th
rough the host computer. 
Windows
Setting up a host computer
1.Install your printer driver (See  Installing USB connected machine’s 
driver on page  30 , Installing network connected machine’s driver 
on page  37 ).
2. Click th
e Windows Start  menu. 
3. For Wi
ndows 2000, select Settings  > Printers.
• F
or Windows XP/Server 2003, select  Printers and Faxes. 
• F
or Windows Server 2008/Vista, select  Control Panel > Hardware 
and Sound  > Printers . 
• For Windows 7, 
 select Control Panel  > Devices and Printers . 
• F
or Windows Server 2008 R2, select  Control Panel > Hardware > 
Devices and Printers . 
4. Righ
t-click the printer icon. 
5.For Wi
ndows XP/Server 2003/Server 2008/Vista, press  Properties.
For Windows 7 or Windows Server 2008 R2, from context menus, 
select the  Printer p

roperties.
 If Printer properties  item has a ► mark, you can select other 
printer drivers connected  with the selected printer.
6. Select the  Sharing ta
 b.
7. Check  Cha
 nge Sharing Options.
8. Check th
e Share this printer  checkbox.
9. Fil
l in the  Share Name  field. Click OK.
Setting up a client computer
1.Install your printer driver (See  Installing USB connected machine’s 
driver on page  30 , Installing network connec te
 d machine’s driver 
on page  37).
2. Click the Windows  St
 art menu. 
3. Select  All prog
 rams > Accessories  > Windows Explorer .
4. En
ter the IP address of the host  computer in the address bar and 
press Enter in your keyboard. 
 In case host computer requires a  User name and Password , 
fill in User ID and password  of the host computer account.
5. R
ight-click the printer icon you  want to share and select Connect .
6. If a set 
up complete message appears, click  OK. 
7. Open
 the file you want to  print and start printing. 
Macintosh
 The following steps are for Mac OS X 10.5~10.6. Refer to Mac Help 
for other OS versions. 
Setting up a host computer
1.Install your printer driver (See  Macintosh on page 31 ).
2. Open
 the  Applications  folder > System Preferences  and click Print 
& Fax . 
3. Select the print
 er to share in the  Printers list. 
4. Select  Share this printer .
Setting up a client computer
1.Install your printer driver (See  Macintosh on page 31 ).
2. Open
 the  Applications  folder > System Preferences  and click Print 
& Fax . 
3. Click the “ +” icon. 
A display window showing the name of your shared printer appears.
4. Select your machine 
 and click Add.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 34
3.network setup 
(clp-320n(k)/clp-321n/clp-325w(k)/clp-326w 
only)
This chapter gives you step-by-step  instructions for setting up the network connected machine and software.
This chapter includes:
•Network environment
• Introducing useful network programs •
Using a wired network
• Installing network connected machine’s driver
  
Network environment
You need to set up the network protocols on the machine to use it as your 
network machine. You can set up the basic network settings through the 
machines control panel or network setting programs.
The following table shows the networ k en
 vironments supported by the 
machine:
ItemRequirements
Network interface •Ethe
rnet 10/100 Base-TX
•802.11
 b/g/n wireless LAN 
(CLP-325W(K)/CLP-326W only)
Network operating system •Win
dows 2000/Server 2003 /Server 
2008/XP/Vista/7/Server 2008 R2
• Variou
s Linux OS
•Ma
c OS X 10.3 ~ 10.6
Network protocols •TCP/
IPv4
•DHCP, BOOTP
• DNS, WINS, Bo
 njour, SLP, UPnP
• Stan
dard TCP/IP Printing (RAW), LPR, 
IPP
• SNMPv 1/2/3, 
 HTTP, IPSec
• TCP/IPv6
  (DHCP, DNS, RAW, LPR, 
SNMPv 1/2/3, HTTP, IPSec)
See  IPv6 configuration on page  36 .
Wireless security  •Auth
entication: Open  System, Shared 
Key, WPA Personal,  WPA2 Personal 
(PSK)
• Encryp
tion: WEP64, WEP128, TKIP, 
AES
Introducing useful  network programs
There are several programs available to  setup the network settings easily in 
network environment. For the network administrator especially, managing 
several machines on the network is possible.
 Before using the programs belo w, set the IP address first.
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to:
•C
onfigure the network parameters necessary for the machine to connect 
to various network environments.
• Custom
 ize machine settings.
See  Using SyncThru™ Web Service on page  68.
SyncThru™ Web Admin Service
A web-based machine management solution for network administrators. 
SyncThru™ Web Admin Service provides you with an efficient way of 
managing network devices and lets you remotely monitor and troubleshoot 
network machines from any site with  co
 rporate internet access. Download 
this program from http://solution.samsungprinter.com.
SetIP
This utility program allows you to se lect a network interface and manually 
configure the IP addresses for  use with the TCP/IP protocol.
• See  IPv4 setting using SetIP Program (Windows) on page  35 .
• See  IPv4 setting using SetIP Program (Macintosh) on page  35 .
• See  IPv4 setting using SetIP Program (Linux) on page  36 .
 TCP/IPv6 is not supported by this program.
Using a wired network
You must set up the network protocol s on your machine to use it on your 
network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding 
po
 rt on your machine.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 35
Printing network configuration report
You can print a Network Configuration Report from the machines control 
panel that will show the current machine’s network settings. This will help 
you to set up a network and troubleshoot problems.
To print the report:
In ready mode, press and hold the 
 (cancel button) for about 5 seconds. 
You can find your machine’s MAC address and IP address.
For example:
• MAC
 Address: 00:15:99:41:A2:78
•IP Addre
 ss: 192.0.0.192
Setting IP address
Firstly, you have to set up an IP address for network printing and 
managements. In most cases a new IP address will be automatically 
assigned by a DHCP (Dynamic Host Co nfiguration Protocol) server located 
on the network.
In a few situations the IP address must be set manually. This is called a 
static IP and
  is often required in co rporate Intranets for security reasons.
• DHCP IP a
 ssignment: Connect your machine to the network, and wait a 
few minutes for the DHCP server to assign an IP address to the 
machine. Then, print the  Network Configuration Report  as explained 
above. If the report  shows that the IP address has changed, the 
assignment was successful. You will see the new IP address in the 
report.
• Sta
tic IP assignment : Use SetIP program to change the IP address 
from your computer.
In an office environment, we recommend that you contact a network 
a
 dministrator to set this address for you.
IPv4 configuration
IPv4 setting using SetIP Program (Windows)
This program is for manually setting the network IP address of your 
machine using its MAC address to communicate with the machine. A 
MAC address is the hardware serial  number of the network interface and 
can be found in the  Network Configuration Report .
For using SetIP program, disable the  co
 mputer firewall before continuing 
by performing the following:
1. Ope
n  Start > Control Panel .
2. Doub
le click  Security Center .
3. Click  F
irewall.
4.Disabl
e the firewall.
Installing the program
1.Insert the Printer Soft ware CD-ROM provided with your machine. 
When the driver CD runs autom atically, close that window.
2. Start Win
dows Explorer and open the X drive. (X represents your 
CD-ROM drive.)
3. Doub
le-click  Application > SetIP.
4. Doub
le-click  Setup.exe to install this program.
5. Select a 
language, then click  Next.
6. Fol
low the instructions in the window and complete the installation.
Starting the program
1.Connect your machine to the network with a network cable.
2. Turn
ed on the machine.
3.From th
e Windows  Start menu, select  All Programs > Samsung 
Printers  > SetIP > SetIP. 4.
Click on 
the  icon (third from left) in the SetIP window to open the 
TCP/IP configuration window.
5. En
ter the machine’s new information into the configuration window as 
follows. In a corporate intranet, you may need to have this 
information assigned by a network manager before proceeding.
•MAC Address : Find the machine’s MAC address from the  Network 
Configuration Report  and enter it without the colons. For 
example, 00:15:99:29:51 :A8 becomes 0015992951A8.
• IP Ad
dress : Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150, 
enter 192
 .168.1.X. (X is num ber between 1 and 254 other than 
the computer’s address.)
• Subnet Mask : 
 Enter a Subnet Mask.
• Def
ault Gateway : Enter a Default Gateway.
6. Click  Ap
ply , and then click  OK. The machine will automatically print 
the  Network Configuration Report . Confirm that all the settings are 
correct.
7. Click  Exit to
  close the SetIP program.
8. If necessary, restart th e
  computer’s firewall.
IPv4 setting using SetIP Program (Macintosh)
For using SetIP program, disable the computer firewall before continuing 
by performing the following:
 The path and UIs may differ by Ma c OS version. Refer to the Mac 
OS manual.
1. Open
  System Preferences .
2. Click  Security .
3. Click the  Fi
 rewall menu.
4. Turn firewall off.
 The following instructions may vary for your model.
1. C
onnect your machine to the network with a network cable.
2.Insert th
e Installation CD-ROM, and open the disk window, select 
MAC_Installer  > MAC_Printer  > SetIP >  SetIPApplet.html .
3. D
ouble click the file and  Safari will automatically open, then select 
Trust . The browser will open the  SetIPApplet.html page that shows 
the printer’s name and IP address information. 
4. Click on 
the  icon (third from left) in the SetIP window to open the 
TCP/IP configuration window.
5. En
ter the machine’s new information into the configuration window as 
follows. In a corporate intranet, you may need to have this 
information assigned by a network manager before proceeding.
• MAC A
ddress : Find the machine’s MAC address from the  Network 
Configuration Report  and enter it without the colons. For 
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 36
example, 00:15:99:29:51:A8 becomes 0015992951A8.
• IP Ad
dress : Enter a new IP address for your printer.
For example, if your computer’s  IP add
 ress is 192.168.1.150, 
enter 192.168.1.X. (X is number between 1 and 254 other than 
the computer’s address.)
• Su
bnet Mask : Enter a Subnet Mask.
• Default Gateway : Ent
 er a Default Gateway.
6. Select  Apply, then OK, an
 d OK again. The printer will automatically 
print the configuration report. Confirm  that all the settings are correct. 
Quit Safari. You may close and eject the installation CD-ROM. If 
necessary, restart the  computer’s firewall. You have successfully 
changed the IP address, subnet mask, and gateway.
IPv4 setting using SetIP Program (Linux)
SetIP program should be automatically  installed during the printer driver 
installation.
 The path and UIs may differ by Linux OS version. Refer to the 
Linux OS manual to turn firewall off.
1. Pri
nt the machine’s network configuration report to find your machine’s 
MAC address. 
2. Ope
n the / opt/Samsung /mfp /share /utils /.
3. Doub
le click the  SetIPApplet.html file. 
4. Click to
 open the TCP/IP configuration window. 
5.Ente
r the network card’s MAC address, IP address, subnet mask, 
default gateway, and then click  Apply. 
 When you enter the MAC address,  enter it without a colon(:).
6. The
 machine prints the network configuration report. Confirm all the 
settings are correct. 
7. Close the SetIP prog
 ram. 
IPv6 configuration
 
TCP/IPv6 is supported properly only in Windows Vista or higher.
 If the IPv6 network seems to not be working, set all the network setting 
to the factory defaults and try again (See  Restoring factory default 
settings using SyncThru™ Web Service on page  36 ).
To use the IPv6 network environment, follow the next procedure to use the 
IPv6 address.
The machine is provided with IPv6 feature on.
1. Conn
ect your machine to the network with a network cable.
2.T
urn on the machine.
3.Pr
int a  Network Configuration Report  from the machine’s control 
panel that will check IPv6 addresses.
4. Select  Start >  Control Pane
 l >  Hardware and Sound >  Printers > Add 
Printer .
5. Click  Add
  a local printer  on the Add Printer windows.
6. Fol
low the instruction on the window.
 If the machine does not work in the network environment, activate 
IPv6. Refer to the next section followed by.
Printing network configuration report
You can print a  Network Configuration Report  from the machines 
control panel that will show the current machine’s network settings. This 
will help you to set up a network and troubleshooting problems.
To print the report: In ready mode, press and hold the 
 (cancel button) for about 5 
seconds. You can find your machine’s MAC address and IP address.
For example:
• MAC Ad
dress: 00:15:99:41:A2:78
•IP Add
ress: 192.0.0.192
Setting IPv6 addresses
Machine supports following IPv6 addresses for network printing and 
managements.
•L
ink-local Address : Self-configured local IPv6 address. (Address 
starts with FE80.)
• Stateless
 Address : Automatically configured IPv6 address by a 
network router.
• Statefu
l Address : IPv6 address configured by a DHCPv6 server.
• Manu
al Address : Manually configured IPv6 address by a user.
Manual address configuration
1.Start a web browser such as Inter net Explorer that supports IPv6 
addressing as a URL (See  SyncThru™ Web Service on page  34 ).
 For IPv4, enter the IPv4 addre ss (http://xxx.xxx.xxx.xxx) in the 
address field and press the Enter key or click  Go.
2. W
hen the  SyncThru™ Web Service  window opens, click Network 
Settings .
3. Click  TCP/I
 Pv6.
4. Ena
ble the  Manual Address  In the TCP/IPv6  section.
5. Select the  Ad
 dress/Prefix and click the  Add button, then the router 
prefix will automatically be entered into the address field. 
Enter the rest of address. (ex: 3FFE:10:88:194:: AAA
 A. “A” is the 
hexadecimal 0 through 9, A through F.)
6. Click the  Appl
 y button.
Installing printer driver
Driver installation for network printer in IPv6 network environment is 
same as TCP/IPv4 (See  Installing network connected machine’s driver 
on page  37 ).
Select TCP/IP Port and when the list  
 of machines are displayed, simply 
select your machi nes IPv6 address.
Using SyncThru™ Web Service
1.Start a web browser such as Inter net Explorer that supports IPv6 
addressing as a URL. 
2. Se
lect one of the IPv6 addresses ( Link-local Address, Stateless 
Address,  Stateful Address , Manual Address ) from Network 
Configuration Report .
3. Enter the IP
 v6 addresses. (ex:  http://[FE80::215:99FF:FE66:7701]) 
 
Address must be enclosed in [] brackets.
Restoring factory default settings using SyncThru™ 
Web Service
1.Start a web browser such as Internet Explorer, Safari or Firefox and 
enter your machine’s new IP address in the browser window.
For example,
2.Click  Go to access the SyncThru™ Web Service.
3. Click  Lo
 gin on the upper right of the Sy ncThru™ Web Service website.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 37
A log-in page appears. 
4. Type
 in the  ID and  Password  then click Login.
If it’s your first time  log
 ging into SyncThru™ Web Service, type in the 
below default ID and password.
• ID:  admin  
• Password:  sec00000  
5. Whe
n the SyncThru™ Web Service  window opens, click Settings > 
Network Settings  > Restore Default .
6. Click  Clear  for network.
7. Turn
 off and restart machine to apply settings.
Installing network connected machine’s driver
You must install the printer driver  software for printing. The software 
includes drivers, applications,  and other user friendly programs.
Make sure that the network setup for your machine is completed. All 
a
 pplications should be closed on  your computer before beginning 
installation. 
Windows
This is recommended for most users. All components necessary for 
machine operations will be installed.
Follow the steps below:
1. Ma
ke sure that the machine is connected to the network and powered 
on.
2. In
sert the supplied software CD into your CD-ROM drive.
•T
he software CD should automatically run and an installation window 
appear.
• If the instal
 lation window does not appear, click  Start and then Run . 
Type X:\ Setup.exe , replacing “X” with the letter which represents 
your CD-ROM drive. Click  OK.
• If 
you use Windows Vista, Windows 7 and Windows Server 2008 R2, 
click  Start  > All programs  > Accessories  > Run.
Type X:\ Setup
 .exe replacing “X” with the letter which represents 
your CD-ROM drive and click  OK.
• If
 the  AutoPlay window appears in Windows Vista, Windows 7 and 
Windows Server 2008 R2, click  Run Setup.exe  in Install or run 
program  field, and click  Continue or Yes  in the  User Account 
Control  window.
3. Select  In
 stall now.
If necessary, select a language from the drop-down list.
 •For CLP-325W(K)/, you can access  Wireless Setting and 
Installation  menu. The Wireless Setting and Installation  
allows you to install a wireless network to connect to the 
machine with USB cable (See  Setting a wireless network with 
USB cable on page  41 ).
• Th
e  Advanced Installation  has two options, Custom 
Installation  and Install Software Only . The Custom 
Installation allows you to select the machine’s connection and 
choose individual component to install. The  Install Software 
Only  allows you to install the supplied software such as Smart 
Panel. Follow the guide in the window.
4. R
ead  License Agreement , and select I accept the terms of the 
License Agreement . Then, click Next.
The program searches the machine.
 If your machine is not found in th e network or locally, the following 
window will appear.
• Check if you want to install the software without connection 
of the printer.
-Check 
this option to install this program without a machine  connected. In this case, the print a test page window will be 
skipped, and completes the installation.
• Sear
ch again
When you press this button, the firewall notice window 
appe
 ars;
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 38
-Turn off the firewall and Search again. For Window operating 
system, click Start > Control Panel > Windows Firewall, 
and inactivate this option. For other operating system, refer 
to its on-line guide.
-Turn off the firewall from the third partys program beside the 
operating system. Refer to the manual provided by 
individual programs.
•Direct Input
The Direct Input allows you to search a specific machine on 
the network.
-Search by IP address: Enter the IP address or the host 
name. Then click Next.
To verify your machine’s IP address, print a network 
configuration report (See 
Printing a machine report on 
page 72).
-Search by network path: To find a shared machine (UNC 
Path), enter the shared name manually or find a shared 
printer by clicking the Browse button. Then click Next.
•Help
If your machine is not connected to the computer or network, 
This help button gives you the detailed information about how 
to connect the machine.
5.The searched machines will be shown on the screen. Select the one you 
wish to use and click Next.
 If the driver searched only one machine, the confirmation window 
appears.
6.After the installation is finished, a window asking you to print a test page 
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and skip to step 8.
7.If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8.If you want to register your machine on Samsung website, click On-line 
Registration.
 If your machine is not connected yet to the computer, click How to 
connect?. How to connect? gives detailed information about 
how to connect the machine. Follow the instructions in the window.
9.Click Finish.
 •After the driver setup, you may enable firewall.
•If the printer driver does not work properly, follow the steps below to 
repair or reinstall the driver. 
a)Make sure that the machine is connected to your machine and 
powered on.
b)From the Start menu, select Programs or All Programs > 
Samsung Printers > your printer driver name > 
Maintenance.
c)Select the option as you wish, follow the instruction on the 
window.
Macintosh
1.Make sure that the machine is connected to your network and powered 
on. Also, your machine’s IP address should have been set. 
2.Insert the supplied software CD into your CD-ROM drive.
3.Double-click the CD-ROM icon that appears on your Macintosh desktop.
4.Double-click the MAC_Installer folder.
5.Double-click the Installer OS X icon.
6.Enter the password and click OK.
7.The Samsung Installer window opens. Click Continue.
8.Read the license agreement and click Continue.
9.Click Agree to agree to the license agreement.
10.Select Easy Install and click Install. Easy Install is recommended for 
most users. All components necessary for machine operations will be 
installed. 
•If you select Custom Install, you can choose individual components to 
install.
11.The message which warns that all applications will close on your 
computer appears. Click Continue.
12.Select the installation type you want and click OK.
•Typical installation for a local printer: Installs default components 
for a device that is directly connected to user’s computer.
•Typical installation for a network printer: Installs software for a 
device that is on the network. The SetIP program automatically runs. 
If the machine has already configured network information, close the 
SetIP program. Go to the next step.
•Wireless Setting and Installation : For CLP-325W(K)/CLP-326W, 
you can access Wireless Setting and Installation menu. The 
Wireless Setting and Installation allows you to install a wireless 
network to connect to the machine with USB cable (See 
Setting a 
wireless network with USB cable on page 41).
13.Follow the instructions on the screen to complete the installation. After 
the installation is finished, click Quit or Restart.
14.Open the Applications folder > Utilities > Print Setup Utility.
•For Mac OS X 10.5~10.6, open the Applications folder > System 
Preferences and click Print & Fax.
15.Click Add on the Printer List.
•For Mac OS X 10.5~10.6, click the “+” icon; a display window will 
pop-up. 
16.For Mac OS X 10.3, select the IP Printing tab. 
•For Mac OS X 10.4, click IP Printer.
•For Mac OS X 10.5~10.6, click IP.
17.Select Socket/HP Jet Direct in Printer Type.
 When printing a document containing many pages, printing 
performance may be enhanced by choosing Socket for Printer 
Type option.
18.Enter the machine’s IP address in the Printer Address field.
19.Enter the queue name in the Queue Name field. If you cannot determine 
the queue name for your machine server, try using the default queue 
first.
20.For Mac OS X 10.3, if Auto Select does not work properly, select 
Samsung in Printer Model and your machine name in Model Name.
•For Mac OS X 10.4, if Auto Select does not work properly, select 
Samsung in Print Using and your machine name in Model. 
•For Mac OS X 10.5~10.6, if Auto Select does not work properly, select 
Select a driver to use... and your machine name in Print Using. 
Your machine appears on the Printer List, and is set as the default 
machine.
21.Click Add.
 If the printer driver does not work properly, uninstall the driver and 
reinstall it. 
Follow steps below to uninstall the driver for Macintosh.
a)Make sure that the machine is connected to your computer and 
powered on.
b)Insert the supplied software CD into your CD-ROM drive.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 39
c)Double-click CD-ROM icon that appears on your Macintosh 
desktop.
d)Double-click the MAC_Installer folder.
e)Double-click the Installer OS X icon.
f)Enter the password and click OK.
g)The Samsung Installer window opens. Click Continue.
h)Read the license agreement and click Continue.
i)Click Agree to agree to the license agreement.
j)Select Uninstall and click Uninstall. 
k)When the message which warns that all applications will close 
on your computer appears, Click Continue.
l)When the uninstall is done, click Quit.
Linux
You need to download Linux software packages from the Samsung website 
to install the printer software.
 To install other software:
•See Installing the Smart Panel on page 32.
•See Installing the Printer Settings Utility on page 32.
Installing the Unified Linux Driver
1.Make sure that the machine is connected to your network and 
powered on. Also, your machine’s IP address should have been set. 
2.From the Samsung website, download the Unified Linux Driver 
package to your computer.
3.Right-click the Unified Linux Driver package and extract the 
package. 
4.Double click cdroot > autorun.
5.The Samsung Installer window opens. Click Continue.
6.The Add printer wizard window opens. Click Next.
7.Select Network printer and click Search button.
8.The Printer’s IP address and model name appears on list field.
9.Select your machine and click Next.
10.Input the printer description and Next
11.When the add printer is done, click Finish.
12.When the install is done, click Finish.
Add network Printer
1.Double-click the Unified Driver Configurator.
2.Click Add Printer…
3.The Add printer wizard window opens. Click Next.
4.Select Network printer and click the Search button.
5.The printer’s IP address and model name appears on list field.
6.Select your machine and click Next.
7.Input the printer description and Next
8.When the add printer is done, click Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							Wireless network setup (CLP-325W(K)/CLP-326W only)_ 40
4.wireless network setup (clp-325w(k)/clp-326w 
only)
This chapter gives you step-by-step instructions for setting up the wireless net work connected machine and software.
This chapter includes:
•Getting started
• Choosing the wireless network installation type
• Setting a wireless network with the WPS button
• Setting a wireless network from the computer •
Setting a wireless network from the computer
• Turning the Wi-Fi network on/off
• Troubleshooting
  
 For more information about the network environment , network 
programs, and installing a network connected machine’s driver, refer 
to the following chapters:
• See  Network environment on page  34 .
• See  Introducing useful network programs on page  34.
• See  Installing network connected  machin
 e’s driver on page 37 .
Getting started
Choosing your ne twork connection
Typically, you can only have one conn ection between your computer and 
the machine at a time. There are tw o types of network connections to 
consider: 
• Wire
less network without access Point (Ad-Hoc mode) 
•Wireless 
 network with an access Point (Infrastructure mode) 
Infrastructure mode
This is an environment generally used for homes 
and SO

HOs (Small Office/ Home Office). This 
mode uses an access point to communicate with 
the wireless machine.
• See  Installing the machine on a wireless 
network with an access point (Windows) on 
page  42 .
• See  Installing the machine on a wireless 
network with an access point (Macintosh) on 
page  44 .
Ad-Hoc mode
This mode does not use an access point. The 
w

ireless computer and wireless machine 
communicates directly. 
• See  Installing the machine on an Ad-Hoc 
wireless network (Windows) on page  43 .
• See  Installing the machine on an Ad-Hoc 
wireless network (Macintosh) on page  45 .
 After choosing your configuration, fo llow the simple directions for your 
computer’s operating system, but first locate the software CD supplied 
with the machine before proceeding.
Wireless network name and network key
Wireless networks require higher security, so when an access point is first 
set up, a network name (SSID), the type of security used, and a Network 
Key are created for the network. Loca te this information before proceeding 
with the machine installation.
Choosing the wireless ne twork installation type
There are various ways to install the wireless network to connect to the 
machine. You can install a wireless  network from the machine’s control 
panel or the computer.  For most users, we recommend using the WPS 
(
) button to configure the  wireless network settings.
From the control panel
•WPS ( ) : If your machine and an access point (or wireless router) 
support Wi-Fi Protected Setup™(WPS), you can easily configure the 
wireless network settings by pressing the  WPS (
) button on the 
control panel. (See  Setting a wireless network with the WPS button on 
page  41 ).
From the computer
From the compurter, we recommend using a USB cable with the 
program provided in the supplied software CD.  
• W
ith a USB cable:  You can simply set up a wireless network using the 
p
rogram on the supplied software  CD. Only Windows and Macintosh 
operating system are supported (See  Setting a wireless network with 
USB cable on page  41 ).
 You can also install a wireless network in Printer Settings Utility 
with a USB cable after installing the driver (Windows and 
Macintosh operating syst ems are supported).
• With 
a network cable:  You can set up a wireless network using the 
Sync
Thru™ Web Service program (See  Setting a wireless network with 
network cable on page  46 ).
Setting a wireless ne twork with the WPS button
You can install a wireless network with the  WPS () button. 
 After compleleting the wireless network connection, you need to install 
a machine driver to print from an application (See  Installing network 
connected machine’s driver on page  37 ).
Downloaded From ManualsPrinter.com Manuals