Samsung Cht 500 Instruction Manual

							GB
51
Setting Up the Display Options
1With the unit in Stop mode, press the MENU button.
2Select DVDusing ,❷buttons, then OK or ❿button.
3Select Display Setupusing ,❷buttons, then press the OK
or ❿button.
4Use the ,❷buttons to select the desired item. Then press the
OK or ❿!button.
•TV Aspect 
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 L-Box :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black bars will 
appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the 
central portion of the 16:9 screen. (Extreme left and right side of 
movie picture will be cut off.)
3. 16:9 Wide : 
You can view the full 16:9 picture on your widescreen TV.
•Black Level
Adjusts the brightness of the screen.(On/Off)
•    NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not 
the case, you can choose to leave “ PAL 60Hz” as is.
•  DVD Out 
1. RGB: Sends RGB signal from the AV JACK(SCART terminal).
2. S-Video:Sends S-VIDEO signal from the S-VIDEO JACK.
3. Video: 
- Sends COMPOSITE VIDEO signal from the AV
JACK(SCART terminal).
- Sends COMPONENT INTERLACE signal from
COMPONENT JACK.
DVD
S-Video Connections (for DVD)DVD
The S-Video is only for the DVD player. The tuner and VCR will
still be viewed through the RF or line inputs.
You must follow the “DVD Out” instructions above to activate
your alternative (S-Video) video selection.
If your television is equipped with S-Video input, you can enjoy
superior video quality when watching DVDs with your DVD-VCR.
1 Connect S-Video Out to TV
Connect an S-Video cable from the S-Video Out on the back panel 
of the DVD-VCR to the S-Video Input on your television.
SPEAKERSFRONT  R             FRONT  L           WOOFER 
SURROUND  R      SURROUND  L       CENTERDVD OnlyCOMPONENT VIDEO OUT
S-VIDEO OUT
To S-Video Input on Your TV
1
NTSC Disc Output
DVD Out
TV Aspect
Black Level
Display Setup
:  4:3 L-Box
:  PAL 60Hz
:  RGB
 Setup
 Setup
 Display Setup
 Setup       :
 
						

							GB
52
Component Connections (for DVD)DVD
Component video output is available only for DVD playback. RF
and Line input are available for Tuner and VCR playback.
If your TV set supports Progressive Scan, it can transmit Pr, Pb, and
Y signals separately, so you can enjoy sharp and clear picture.
☛What is Progressive Scan?
It is a set of jacks that can provide sharp and clear picture 
quality by using twice the number of fields of lines than 
component output.
1Connect the component output of the DVD player to your TV set.
Use the component cable to connect the component output on the
back panel of the DVD-VCR to the component input of your TV.
If you mix up the connections when connecting the component cable,  
the picture will appear reddish or bluish.
2Set your TV to COMPONENT.
Select component input as your TVs AV input. At this point, even
if the picture appears reddish, it is normal.
3Press the P.SCAN button on the front panel.
If the P.SCAN button on the front panel of the DVD-VCR is
pressed, a blue LED will light up and the following message will be
displayed:
To activate Progressive Scan, press OK.
The following message will be displayed and then the picture will
be played in Progressive Scan mode.
4To deactivate Progressive Scan, press the P.SCAN button again.
If the P.SCAN button on the front panel of the DVD-VCR is
pressed again, a blue LED will light up and Progressive Scan
mode will be canceled. Select another mode as your TVs AV input
to view another output of the DVD-VCR. 
➢This is available only for a TV set that supports Progressive Scan.
• While Progressive Scan is active, video, S-video, and SCART 
output are not available.
• To activate Progressive Scan, the DVD-VCR must be in Stop 
mode.
➢You can listen to audio sound through AUX audio output or 5.1CH 
speakers while watching Component or S-Video output.
SPEAKERSFRONT  R             FRONT  L           WOOFER 
SURROUND  R      SURROUND  L       CENTERDVD OnlyCOMPONENT VIDEO OUT
S-VIDEO OUT
To Component 
Input on Your TV
1
Press OK to confirm
Prorgessive scan mode.
Otherwise press RETURN.
Please set your TV to component
input. If your TV doesnt have
Progressive scan mode, there will
be no signal on the screen.
 
						

							GB
53
Special Playback FeaturesDVD
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the
❿ll button. 
1 StillPress the ❿ll button on the remote control during playback.
The picture will still and the audio will mute.To resume playback, press the ❿ll button.If the player is left in Still mode for 5 minutes, it will stop
automatically.
2 SKIP Forward/BackWhile a CD or DVD disc is in Play mode, press the ❿❿l/ l➛➛buttons on the remote control or front panel to jump forward and
backward through disc chapters/tracks.
Skip Forward will jump to the next chapter/track.Skip Back will jump to the beginning of the current 
chapter/track.
Press Skip Back again to jump to the beginning of the
previous chapter/track.
Search Forward/BackWhile a disc is in Play mode, press and hold the ❿❿/➛➛buttons
on the remote control or front panel to visually search
forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press 
❿ll button to resume normal speed.
NOTE: CD search speed - 2X, 4X, 8X
3 Slow MotionDuring playback, press the ❿ll button to Still the image. Then
use the ❿❿to play in slow motion at variable speeds.
Each press increases the slow motion speed playback to 1/8, 
1/4 or 1/2 normal speed.
Audio is muted during slow motion playbackSlow function operates only in the forward directionSlow function is not available for CD
4 Stop/ResumePress the button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the
❿ll button. Press the button twice to completely stop playback. The
next time you press ❿ll, the disc will start over from the
beginning. 
1
22
4
 
						

							GB
54
Adjusting the Aspect Ratio (EZ View)DVD
1Press the EZ VIEW button.
•  The screen size changes when the button is pressed repeatedly.
•  The screen zoom mode operates differently depending on the screen setting in the initial DVD menu.
•  To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the 
initial setup (See page 51).
To play back using aspect ratio (DVD)
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a 
2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look
vertically stretched. (Depending on the type of disc, the black bars may not disappear completely.)
• Zoom Fit 
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
• Screen Fit 
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit 
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
• Vertical Fit 
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
 
						

							GB
55
Adjusting the Aspect Ratio (EZ View)DVD
If you are using a 4:3 TV
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio. 
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically
stretched.
• Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture would look vertically
stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
➢• This function may behave differently depending on the type of disc.
 
						

							GB
56
Using the Display Function (DVD/VCD/CD)DVD
1
ENG ENG
MOVEOK
ENG ENG
MOVEOK
ENG ENG
0~9OK
1During play, press the INFO. button on the remote.
2Use the ,❷buttons to select the desired item.
3Use the ➛, ❿buttons to make the desired setup.
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from the
desired time.
4To make the screen disappear, press the INFO. button again.
To access the desired title when there is more than one in the
disc. For example, if there is more than one movie on a DVD,
each movie will be identified.
Most of DVD discs are recorded in chapters so that you can
quickly find a specific passage. 
Allows playback of the film from a desired time. 
You must ok the starting time as a reference. 
Refers to the language of the film soundtrack. In the example,
the soundtrack is played in English 5.1CH. A DVD disc can
have up to eight different soundtracks.
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or, 
if you prefer, turn them off from the screen. 
A DVD disc can have up to 32 different subtitles.
➢• What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar to 
tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles. For example, if a 
disc contains four different movies, each might be considered a 
title.
When Playing a DVD 
TITLE
CHAPTER
TIME
AUDIO
SUBTITLE
➢When in VCD 2.0 mode (MENU ON), this function does
not work. Use the DISC MENU button in VCD 2.0 mode to
select MENU ON or OFF.
 
						

							GB
57
Selecting the Subtitle LanguageDVD
You can select a desired subtitle quickly and easily with the
subtitle button. 
1Press the SUBTITLE button.
2Use the ➛, ❿buttons to select the desired subtitle language.
3Use the ,❷buttons to determine whether or not the subtitle
will be displayed.
• The subtitle languages are represented by abbreviations.
➢• This function depends on what languages are encoded
on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• 
How to have the same subtitle language come up
when everyou play  a DVD;Refer to “Setting Up the 
Language Features” on page 47.
Using the SUBTITLE button
Changing the Camera AngleDVD
When a DVD contains multiple angles of a particular scene, you
can select the Angle function.
Press the ANGLE button to see if an ANGLE (  ) mark is
present at the upper left hand corner of the screen.
1When an ANGLE mark is shown, press the ANGLE button, then
an ANGLE select icon will appear at the upper left hand corner
of the screen.
2Use the ➛, ❿buttons to select the desired screen angle.  
3To turn off the display, press the ANGLE button again.
Using the ANGLE button
5
1
ENG On
ENG Off
1
 
						

							GB
58
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or
all of the disc.
1Press the REPEAT button on the remote. 
Repeat screen appears.
2Select Chapter, Title or A-B using the ➛, ❿buttons.
• Press the REPEAT button. Select A-B on screen with the 
➛, ❿
buttons.
• Press OK at the point where you want the repeat play to start 
(A). The B is automatically highlighted.
• Press OK at the point where you want the repeat play to stop 
(B).
• To terminate the function, press the CLEAR button.
• A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
3Press OK.
4To return to normal play, press REPEAT again, then press the ➛,❿buttons to select Off and press OK.
•  It is available to press CLEAR button on the remote controller in 
order to stop REPEAT play.
➢When in VCD 2.0 mode (MENU ON), this function does not work.
Use the DISC MENU button in VCD 2.0 mode to select MENU ON
or OFF.
DVD
When playing a DVD
OffTrack   Disc   A - B
OffChapter   Title   A - B
1
DVD
VCD/CD
Using the Zoom (DVD/VCD)
1During play or still mode, press the ZOOM button on the remote. A 
square will be displayed on screen.
2Use the ,❷or ➛, ❿!button to select the part of the screen you 
want to zoom in on.
3Press the OK button.During DVD play : press OK to zoom in 2X/4X/2X/Normal in
order.
During VCD play, press OK to zoom in 2X/normal in order.
1
DVD
 
						

							GB
59
Selecting the Audio Language
You can select a desired audio language quickly and easily with the
AUDIO button.
1Press the AUDIO button.
2Use the ➛, ❿buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
3Use the  ➛, ❿buttons to select Stereo, ➛or ❿!(On VCD/CD)
➢• This function depends on what languages are encoded on the 
disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• 
How to have the same audio language come up whenever you 
play a DVD ;Refer to “Setting Up the Language Features” on 
page 48.
DVD
Using the AUDIO button
You can repeat a single chapter or a complete title.
1      Open Repeat Menu
Press the REPEAT button while in Play mode to open the Repeat 
menu.
The current Repeat mode will be highlighted.
2      Select “Chapter”
Use the ➛,❿buttons to select “Chapter”.
When you select Chapter “Chapter” will be highlighted.
3      Repeat Chapter
Press the OK button to repeat the current chapter.
4     Select “Title”
Use the ➛,❿buttons to select “Title”.
When you select Title “Title” will be highlighted.
5      Repeat Title
Press the OK button to repeat the title.
➢DVD repeats play by chapter or title, VCD repeats play by 
track or disc. 
Repeat Chapter/Title
1
OffTrack   Disc   A - B
OffChapter   Title   A - B
DVD
VCD/CD
DVD
Stereo
ENGDOLBY DIGITAL  5.1CH
DVD
VCD/CD
 
						

							GB
60
Using the Mark Function (DVD/VCD)DVD
This feature lets you bookmark sections of a DVD or VCD so you
can quickly find them at a later time.
1During play, press the MARK button on the remote. 
The Mark icons will be displayed.
2Use the ➛, ❿buttons to move to the desired Mark icon.
3When you reach the scene you want to mark, press the OK
button. The icon will change to a number (1, 2, or 3).
4Press the MARK button to turn off the display.
1During play, press the MARK button on the remote.
2Use the ➛, ❿buttons to select a marked scene.
3Press the PLAY/STILL (❿ll) buttons to skip to the marked
scene. 
1During play, press the MARK button on the remote.
2Use the ➛, ❿buttons to select the mark number you want to
delete.
3Press the CLEAR button to delete a mark number. 
Press the MARK button to turn off the display.
➢• Up to three scenes may be marked at a time.
• Depending on the disc, the mark function may not work.
• When in VCD 2.0 mode (MENU ON), this function does not 
work.
Using the Mark Function (DVD/ VCD)
Recalling a Marked Scene
Clearing a Mark
 –   –   –
3
1