Samsung Cht 500 Instruction Manual

							Clearing a Preset Station
GB
21
VCR
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Auto SetupManual Setup
Install
TV System                    : G
VCR Output CH            : CH 36
If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1After pressing the MENU, press the OK or ❿.Result: The Setup menu is displayed.
2Press the corresponding #,❷buttons to select the Installoption.
3Press the OK or❿to select this option.
Result: The Installmenu is displayed.
4Press the corresponding #or ❷buttons, until the Manual
Setupoption is selected.
5Press the OK or❿to select a Manual Setupoption.
Result: The TV STATION TABLEmenu is displayed.
6Press the corresponding #or ❷buttons, until the required
preset TV station (PR) is selected.
7Press the CLEAR button.
8Repeat the same procedure from Step 6onwards until all the
required stations have been cleared.
9On completion, press the RETURN button four times to exit the 
menu.
TV  STATION  TABLE
                                                         SWAPPING :  OK
DELETE  :  CLEAR RETURN
021               - - - -                OFF PR           CH              NAME              DEC
 1
 2
 3
 4
 5
 
						

							Changing the Preset Station Table
GB
22
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
1After pressing the MENU, press the OK or ❿.Result: The Setup menu is displayed.
2Press the corresponding #,❷buttons to select the Installoption.
3Press the OK or ❿buttons to select this option.
Result: The Installmenu is displayed.
4Press the corresponding #or❷buttons, until the Manual
Setupoption is selected.
5Press the OK or ❿button to select this option.
Result: The TV STATION TABLEmenu is displayed.
6Press the corresponding #or❷buttons, until the required
preset TV programme is selected.
Result
: The selected station is displayed at the same time on
the television screen.
7To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3) 
8Press the #or ❷buttons to select required position. 
And then press OK again to swap the position.  
9On completion, press the RETURN button four times to exit the
menu.
VCR
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Auto SetupManual Setup
Install
TV System                    : G
VCR Output CH            : CH 36
- - - -
TV STATION TABLE
                                                         SWAPPING :  OK
DELETE  :  CLEAR RETURN
PR           CH              NAME              DEC
 1             021                                      OFF                    
 2
 3
 4
 5
- - - -
TV STATION TABLE
                                                         SWAPPING :  OK
DELETE  :  CLEAR RETURN
PR           CH              NAME              DEC
 1                     
 2
 3             021                                      OFF
 4
 5
 
						

							Setting the DVD-VCR Output Channel
Selecting the RF OUT Sound Mode (G-K )
GB
23
VCR
VCR
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures. 
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen. 
1After pressing the MENU, press the OK or ❿.
Result: The Setup menu is displayed.
2Press the corresponding #,❷buttons to select the Installoption.
3Press the OK or❿to select this option.
Result: The Installmenu is displayed.
4Press the #or❷buttons, until the VCR Output CHoption
is selected.
5Select the required output channel (CH21~CH69) by pressing
the  OK or 
❿buttons.
CH21             . . CH36             . . CH69
6On completion, press RETURN three times to exit the menu. 
Then tune your television again (see page 14).
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
You can choose the sound mode (G-K ) according to the TV set
connected to your VCR.
1After pressing the MENU, press the OK or ❿.
Result: The Setup menu is displayed.
2Press the corresponding #,❷buttons to select the Installoption.
3Press the OK or ❿to select this option.
Result: The Installmenu is displayed.
4Press the #or❷buttons, until the TV System option is 
selected.
5Press the OK or ❿buttons to select G or K.
6On completion, press RETURN three times to exit the menu.
Auto SetupManual Setup
Install
TV System                    : G
VCR Output CH            : CH 36G
K
Auto SetupManual Setup
TV System                    : G
VCR Output CH            : CH 36
Install
CH 21
:
CH 36
:
CH 69
 
						

							NICAM
Selecting the Colour Mode
GB
24
VCR
VCR
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception
standard when you select AUTO.
➢When playing back a cassette, the standard is 
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to 
your  TV.  If your TV is a  PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1After pressing the MENU, press the OK or ❿.Result: The Setup menu is displayed.
2Press the corresponding #,❷buttons to select theUser Setoption.
3Press the OK or ❿to select this option.
Result: The User Setmenu is displayed.
4Press the corresponding #or❷buttons, until the Colour
System
option is selected.
5Press the Ok or ❿button to select Auto ➝ PAL ➝ SECAM
➝ MESECAM➝ B/W.
AutoWhen playing back a cassette, the system standard is 
automatically selected by the DVD-VCR. 
B/WBlack and White
6On completion, press RETURN three time to exit the menu.
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Colour  System              :  AutoNICAM                         :  On  
IPC                               :  On  
ShowView Extend      :  Off  
User Set
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard
mono sound broadcast and you can select the desired sound. 
Please refer to page 37.  
1After pressing the MENU, press the OK or ❿.Result: The Setup menu is displayed.
2Press the corresponding #,❷buttons to select the  User Set option.
3Press the OK or ❿to select this option.
Result: The User Setmenu is displayed.
4Press the corresponding #or❷buttons, until the NICAM
options selected.
5To... Press OK or❿, until...
Mono modeOffis displayed.
Off: Only set at this position to record 
the standard  mono sound during a 
NICAM broadcast if the stereo 
sound is distorted due to inferior
reception conditions. 
NICAM modeOnis displayed.
On: Normally set at this position.
6On completion, press RETURN three times to exit the menu.
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Colour  System              :  AutoNICAM                         :  On  
IPC                               :  On  
ShowView Extend      :  Off  
User Set
On
Off
Auto
PAL
SECAM
MESECAM
B/W
 
						

							Intelligent Picture Control
GB
25
VCR
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences. 
1During playback, press the MENU button on the remote control.
2Press the OK or ❿.
Result: The Setup menu is displayed.
3Press the corresponding #, ❷!buttons to select the User Set
option.
4Press the OK or ❿!buttons to select this option.
Result
: The User Setmenu is displayed.
5Press the corresponding #or ❷buttons, until the IPCoption is 
selected.
6Press the Ok or ❿!buttons to select the IPC (intelligent picture 
control) option.
➢When intelligent picture control mode is On, the 
sharpness of the image is adjusted automatically.   
7To adjust the sharpness manually, press the ❷button to turn  
the IPC mode 
Off. 
8Press the ➛or ❿buttons until the picture is displayed according 
to your preferences.
➢If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9On completion, press the RETURN button.
➢You can also directly Select function using IPC button
on the remote control.
Colour  System              :  AutoNICAM                         :  On  
IPC                               :  On  
ShowView Extend      :  Off  
User Set
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
On
Off
 
						

							Auto Power Off
GB
26
VCR
The Auto Power Off feature automatically turns off your DVD-
VCR if no signal is received and you do not press any button for
the selected time.  
1After pressing the MENU, press the OK or ❿.Result: The Setup menu is displayed.
2Press the corresponding #or❷buttons, until the Auto
Power Offoption is selected.
3Press the
OK or ❿!buttons, until you select the time of Auto
Power Off interval. 
Off               1Hour             2Hour              3Hour
4On completion, press RETURN twice to exit the menu.
Language                    :  English
User Set                       
Screen Messages       :  On    
Install
Auto Power Off           :  Off    
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Off
1Hour
2Hour
3Hour
To prevent delays or over-runs the VCR has a function called
ShowView Extend allowing you to extend the recording time by
up to 60 minutes.  
➢Only use if PDC is not available or set to Off.
1After pressing the MENU, press the OK or ❿.
2Press the corresponding #,❷buttons to select theUser
Setoption.
3Press the OK or ❿!buttons to select this option.
Result: The User Setmenu is displayed.
4Press the corresponding #or❷buttons, until the ShowView Extendoption is selected.
5Press the OK or❿buttons to set the ShowView Extendtime
by increments of 10 minutes. 
6To turn off, press OK or ❿buttons repeatedly until Offshows. 
Colour System               :  AutoNICAM                         :  On  
IPC                               :  On  
ShowView Extend      :  Off  
User Set
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Off
10
20
30
40
50
60 
ShowView Extend VCR
 
						

							GB
27
Screen Messages
Selecting the Cassette Type
Your DVD-VCR displays most information on both the DVD-VCR
and the television.
You can choose to display or hide this information on the
television screen (except for the SEARCH, Programming MENU
and Timer functions, which cannot be hidden).
1After pressing the MENU, press the OK or ❿.Result: The Setup menu is displayed.
2Press the corresponding #or❷buttons, until the Screen
Messagesoption is selected.
3To... Press OK or❿, until...
Display on-screen informationOnis displayed.
Hide on-screen informationOffis displayed.
4On completion, press RETURN twice to exit the menu.
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Install
Screen Messages       :  On    
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Repeat Play                :  Off  
S-VHS                          :  Off  
VCR Setup
Tape Select                     :  E180
On
Off
If you wish to use the tape counter to display the time remaining
on a cassette, you must indicate the type of cassette inserted.
1After pressing the MENU press the corresponding #,❷buttons to select the VCR option.
2Press the OK or ❿buttons to select this option.
Result: The VCR Setupmenu is displayed.
3Press the corresponding #or❷buttons, until the Tape
Selectoption is selected.
4Press the OK or ❿buttons as many times as required, until the
correct cassette length is displayed.
E180            E240
E 300           E260 
5Press RETURN twice to exit the menu.
E180
E240
E260
E300
VCR
VCR
 
						

							S-VHS Play
Repeat Play
GB
28
VCR
VCR
You can set repeat play to repeat the tape continuously from
beginning to end. 
1After pressing the MENU, press the corresponding #,❷buttons to select the VCR option.
2Press the OK or ❿!buttons to select this option.
Result: The VCR Setupmenu is displayed.
3Press the corresponding #or❷buttons, until the Repeat
Playoption is selected.
4To... Press OK or❿, until...
Repeat playOnis displayed.
Do not wish to repeat playOffis displayed.
5On completion, press RETURN twice to exit the menu.
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Tape Select                     :  E180Repeat Play                :  Off  
S-VHS                          :  Off  
VCR Setup
The DVD-VCR allows you to playback high quality S-VHS tapes.
1During S-VHS play mode, press the MENU.
2Press the corresponding #,❷buttons to select the VCR option.
3Press the OK or ❿buttons to select this option.
Result
: The VCR Setupmenu is displayed.
4Press the corresponding #or❷buttons, until the S-VHSoption is selected.
5To... Press OK or❿, until...
S-VHS playOnis displayed.
Do not wish to  S-VHS  playOffis displayed.
6On completion, press RETURN twice to exit the menu.
To watch S-VHS tapes, set the S-VHS mode to Onin the VCR
Setup.
Off
On
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Repeat Play                :  Off  
VCR Setup
Tape Select                     :  E180
S-VHS                          :  Off  Off
On
 
						

							Selecting the Recording Speed
GB
29
VCR
You can record a cassette at two different speeds: 
SP (Standard Play)
LP (Long Play) 
In Long Play modes:
Each cassette lasts twice as long 
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the 
remote control, until...  
In standard play mode SPis displayed.
In long play mode
LPis displayed. 
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
 
						

							Recording a Programme Immediately
Protecting a Recorded Cassette
GB
30
VCR
VCR
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot
record on the tape.
1If you wish to protect a cassette, break off the tab using a small
screwdriver.
2To re-record over a protected cassette (safety tab broken),
cover the hole with adhesive tape.
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result
: The DVD-VCR is switched on automatically.
4Select:The station to be recorded using the PROG (    or  )buttonsor
The AV1, AV2 or AUX source using the INPUT SEL.
button for a satellite tuner or external video source
Result
: The station number is displayed and the programme
can be seen on the television.
5Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
6Hold REC () down for a while to start recording.
Result
:The record indicator appears on the television and 
DVD-VCR display. An index is recorded on the tape 
(see page 39).
7To stop recording, press once.
➢If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
If you reach the end of the tape while recording,
the cassette rewinds automatically.
1
7
4
4
6
5