Samsung C460 User Guide

2213.  Useful Setting Menus
Network setup
 
Some menus may not appear in the display depending on options or 
models. If so, it is not applicable to your machine (see "Menu overview" on 
page 31).
 
•  Press   (Menu)> Network  on the control panel.
OptionDescription
TCP/IP (IPv4) Selects the appropriate protocol and configure 
parameters to use the network environment.
 
There are lots of parameters to be set. If you are 
not sure, leave as is, or consult the network 
administrator.
 
TCP/IP...

Network setup
2223.  Useful Setting Menus
Protocol Mgr. 
(continued.) •
SNMP V1/V2:  You have to enable this option to use 
SNMP V1/V2 protocol. Administrator’s can use SNMP 
to monitor and manage machines on the network.
• UPnP(SSDP):  You have to enable this option to use 
UPnP(SSDP) protocol.
 
Turn the power off and on after you change this 
option.
 
• MDNS:  You have to enable this option to use MDNS 
(Multicast Domain Name System) protocol.
• SetIP: You have to enable this option to use SetIP...

4. Special Features
This chapter explains special copying, scanning, faxing, and printing features.
• Altitude adjustment224
• Entering various characters 225
• Setting up the fax address book 226
• Printing features 229
• Scan features 241
• Fax features 250
 
• The procedures in this chapter are mainly based on Windows 7.
• It may be necessary to press OK to navigate to lower-level menus for some models.
  

2244.  Special Features
Altitude adjustment
Print quality is affected by atmospheric pressure,  which is determined by the 
height of the machine above  sea level. The following information will guide you 
on how to set your machine  for the best print quality.
Before you set the altitude value, d etermine the altitude where you are.
• Normal : 0-1,000 m(3,280 ft)
• High1 : 1,000 m(3,280 ft)- 2,000 m(6,561 ft)
• High2 : 2,000 m(6,561 ft)-3,000 m(9,842 ft) 
• High3 : 3,000 m(9,842 ft)- 4,000 m(13,123 ft)...

2254.  Special Features
Entering various characters
As you perform various tasks, you may need to enter names and numbers. For 
example, when you set up your machine, you enter  your name or your 
company’s name, and the fa x number. When you store fax numbers or email 
addresses in memory, you may also  enter the corresponding names.
1 
Entering alphanumeric characters
Press the button until the correct letter appears on the display. For example, to 
enter the letter O, press 6,  labeled with MNO. Each...

2264.  Special Features
Setting up the fax address book
You can set up speed number with the fax numbers you use frequently via 
SyncThru™ Web Service and then easi ly and quickly enter fax numbers by 
entering the location numbers a ssigned to them in address book.
3 
Registering a speed dial number
1Select   (fax) >  ( Address Book) > New&Edit  > Speed Dial  on 
the control panel. 
2 Enter a speed dial number and press  OK.
 
If an entry is already stored in the  number you choose, the display shows...

Setting up the fax address book
2274.  Special Features
6 
Registering a group dial number
1Select   (fax) >  (Address Book) > New&Edit  > Group Dial  on 
the control panel. 
2 Enter a group dial number and press  OK.
 
If an entry is already stored in the  number you choose, the display shows the 
message to allow you to change it. To  start over with another speed dial 
number, press   ( Back). 
 
3 Search by entering the first few letters of the speed  dial’s name to put in 
the group.
4 Select the...

Setting up the fax address book
2284.  Special Features
8 
Searching address book for an entry
There are two ways to searc h for a number in memory. You can either scan from 
A to Z sequentially, or you  can search by entering the  first letters of the name 
associated with the number.
1Select ct   (fax) >  ( Address Book) > Search&Dial  > Speed Dial  
or  Group Dial  on the control panel. 
2 Enter All or  ID and press  OK.
3 Press the name and number or the ke ypad button labeled with the letter 
you...

2294.  Special Features
Printing features
 
• For basic printing features, refer to the Basic Guide (see "Basic printing" 
on page 52).
• This feature may not be available depending on model or optional goods  (see "Features by model" on page 7).
 
10 
Changing the default print settings
1Click the Windows  Start menu. 
2 Select  Control Panel  > Devices and Printers .
3 Right-click on your machine.
4 Select Printing preferences .
 
If Printing preferences  has a ▶, you can select other...

Printing features
2304.  Special Features
12 
Using advanced print features
 
XPS printer driver: used to print XPS file format. 
• See "Features by model" on page 7.
• The XPS printer driver can be inst alled only on Windows Vista OS or 
higher.
• For models that provide XPS dr iver from the Samsung website, http://
www.samsung.com   > find your product> Support or downloads.
 
Printing to a file (PRN)
You will sometimes need to sa ve the print data as a file. 
1Check the Print to file box in...