Samsung C460 User Guide

Wireless network setup
1812.  Using a Network-Connected Machine
10 Select Configuration of Wireless network  on the Printer Connection 
Type  and click  Continue . 11 After searching the wire less networks, a list of wireless networks your 
machine has searched appears. Click  Advanced Setting.
 
•Enter the wireless Network Name:  Enter the SSID name (SSID is case-
sensitive).
• Operation Mode:  Select ad hoc.
• Channel:  Select the channel ( Auto Setting or 2412 MHz to 2467 MHz).
• Authentication:...

Wireless network setup
1822.  Using a Network-Connected Machine
12 The window showing the wireless network settings appears. Check the 
settings and click  Next.
 
Before entering the IP address for the machine, you must know the 
computer’s network configuration info rmation. If the computer’s network 
configuration is set to DHCP, the wireless network setting should also be 
DHCP. Likewise, if the computer’s networ k configuration is set to Static, the 
wireless network setting should also be Static....

Wireless network setup
1832.  Using a Network-Connected Machine
17 
Using a network cable
 
Machines that do not support the network interface will not be able to use 
this feature (see "Rear view" on page 22).
 
Your machine is a network  compatible machine. To enable your machine to 
work with your network, you will n eed to perform some configuration 
procedures.
 
• After completing the wireless networ k connection, you need to install a 
machine driver to print from an a pplication (see...

Wireless network setup
1842.  Using a Network-Connected Machine
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection 
status. 
1Check whether or not the network cabl e is connected to the machine. If 
not, connect the machine wi th a standard network cable.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter 
your machine’s new IP addr ess in the browser window.
For example,
3 Click  Login  on the upper right of the  SyncThru™...

Wireless network setup
1852.  Using a Network-Connected Machine
9 The confirmation window appears, please chec k your wireless setup. If 
the setup is right, click  Apply.
 
Disconnect the network cable (standard or network). Your machine should 
then start communicating wirelessly wi th the network. In case of Ad-hoc 
mode, you can use a wireless LAN and wired LAN simultaneously.
 
10 Insert the supplied softwa re CD into your CD-ROM drive, and follow the 
instructions in the window to  set up the...

Wireless network setup
1862.  Using a Network-Connected Machine
19 
Setting the Wi-Fi Direct for mobile printing
Wi-Fi Direct is an easy-to-setup peer-to-peer conn ection method between the 
Wi-Fi Direct certified pr inter and a mobile device  that provides a secure 
connection and better throughput than ad hoc mode.
With Wi-Fi Direct, you can connect your  printer to a Wi-Fi Direct network while 
concurrently connecting to  an access point. You can also use a wired network 
and a Wi-Fi Direct network...

Wireless network setup
1872.  Using a Network-Connected Machine
-Network Password : If your printer is a Group Owner, a Network 
Password  is required for other mobile  devices to connect to your 
printer. You can configure a n etwork password yourself, or can 
remember the given Netwo rk Password that is randomly generated by 
default.
From the machine (Machines with a display screen)
• Select  Network > Wireless >  Wi-Fi Direct from the control panel.
• Enable  Wi-Fi Direct .
From the machine (Machine...

Wireless network setup
1882.  Using a Network-Connected Machine
20 
Troubleshooting
Problems during setup or driver installation
Printers Not Found
• Your machine may not be turned on. Turn on your computer and the 
machine.
• USB cable is no t connected between your comp uter and machine. Connect 
the machine to your computer using the USB cable.
• The machine does not support wire less networking. Check the machine's 
user's guide included on  the software CD supplied  with your machine and...

Wireless network setup
1892.  Using a Network-Connected Machine
 
If the printing job is not working in DHCP mode, the problem may be caused 
by the automatically changed IP address. Compare the IP address between 
the product's IP address and the printer port's IP address.
How to compare:
1  Print the network information report of  your printer, and then check the 
IP address (see "Printing a network configuration report" on page 148).
2  Check the printer port's IP address from your...

Wireless network setup
1902.  Using a Network-Connected Machine
Other problems
If problems occur while using the machine on a network, check the following: 
 
For information on the access point (or wireless router), refer to its own 
user's guide. 
 
• You cannot enable wired and wireless networks at the same time.
• Your computer, access point (or wi reless router), or machine may not be 
turned on.
• Check the wireless reception around the  machine. If the router is far from 
the machine or there...