Runco XP-50DHD Plasma Display User Manual

							External Control
PlasmaWall XP Series Installation/Operation Manual 65 
PREL
IMINARY
Aspect Ratio Commands
16:9NAYESSelects the 16:9 aspect ratio
4:3NAYESSelects the 4:3 aspect ratio
ASPECT?NANAReturns current aspect ratio
CINEMANAYESSelects the Cinema aspect ratio
LETTERBOXNAYESSelects the Letterbox aspect ratio
NATIVENAYESSelects the Native aspect ratio
VIRTUALWIDENAYESSelects the VirtualWide aspect ratio
VIRTUALCINEMANAYESSelects the Virtual Cinema aspect ratio
Picture Adjust Commands
BRIGHTNESS-50/50YESSets a value for brightness
BRIGHTNESS?NANAReturns brightness setting value
CHROMADELAY-7/7YESSets a value for input color chroma delay
CHROMADELAY?NANAReturns input color chroma delay setting
COLOR-50/50YESSets a value for color
COLOR?NANAReturns color setting value
CONTRAST-50/50YESSets a value for contrast
CONTRAST?NANAReturns contrast setting value
FILMMODE0/1YESSets Film Mode off (0) or on (1)
FILMMODE?NANAReturns Film Mode setting 
(0 = off; 1 = on)
FILTER0/10YESSets a value for input color noise filter
FILTER?NANAReturns input color noise filter setting
PHASE0/31YESAdjusts phase
PHASE?NANAReturns phase setting value
SHARPNESS-50/50YESSets a value for sharpness
SHARPNESS?NANAReturns sharpness setting value
TINT-50/50YESSets a value for tint
TINT?NANAReturns tint setting value
Table 6-1. Serial Commands (continued)
CommandParameter 
(min/max)Value 
Stored?Description 
						

							External Control
66 PlasmaWall XP Series Installation/Operation Manual
PRELI
MINARY
Image Preset Commands
CUSTOM1NAYESLoads “Custom 1” image preset
CUSTOM2NAYESLoads “Custom 2” (“THX”) image preset
DAYNAYESLoads “ISF Day” image preset
NIGHTNAYESLoads “ISF Night” image preset
PRESET?NANAReturns currently-selected preset 
(ISF Day, ISF Night, Custom 1 or 
Custom
 2/THX)
Input Position Commands
IHEIGHT0/20YESSets the value for input height
IHEIGHT?NANAReturns input height value
IHPOS-50/50YESSets a value for horizontal input position
IHPOS?NANAReturns input horizontal position value
IVPOS-50/50YESSets a value for vertical input position
IVPOS?NANAReturns input vertical position value
IWIDTH0/50YESSets the value for input width 
IWIDTH?NANAReturns input horizontal width value
OVERSCAN 0/20YESSets the overscan percentage
OVERSCAN?NANAReturns overscan percentage
OVERSCANMODE 0/1YESSets the overscan mode (0=zoom; 
1=crop)
OVERSCANMODE?NANAReturns the overscan mode (0=zoom; 
1=crop)
Output Shift Commands
OHEIGHT-50/50YESSets the value for output height
OHEIGHT?NANAReturns output height value
OHPOS-50/50YESSets the value for output horizontal posi-
tion
OHPOS?NANAReturns output horizontal position value
OVPOS-50/50YESSets the value for output vertical position 
OVPOS?NANAReturns output vertical position value
OWIDTH-50/50YESSets the value for output width
OWIDTH?NANAReturns output horizontal width value
Table 6-1. Serial Commands (continued)
CommandParameter 
(min/max)Value 
Stored?Description 
						

							External Control
PlasmaWall XP Series Installation/Operation Manual 67 
PREL
IMINARY
Miscellaneous Commands
DISPLAY?NANAReturns display device input source 
value, as follows:
1 = Auto
22 = XP-50DHD
23 = XP-65DHD
24 = XP-103DHD
INRES?NANAReturns input resolution
MODEL?NANAReturns product model name
OUTRES?NANAReturns output resolution
SERNUM?NANAReturns DHD Controller serial number
SWVER?NANAReturns software version number
SYSSTATE?0/4NAReturns current system state
0 = Off
1 = Initializing
2 = On
3 = Powering Down
4 = Error
TRIGGER1/3YESAssigns trigger to currently-selected 
aspect ratio
The following serial commands are meant to emulate buttons on the remote control or DHD Con-
troller front panel. Each button has its own serial command, so effectively it is as if you were using 
the IR remote only you’ll be doing so via serial commands. These commands provide active OSD 
responses just like the IR remote. 
DOWNNANADown-Arrow () key
ENTERNANAENTER key
EXITNANAEXIT (RETURN) key
LEFTNANALeft-Arrow () key
MENUNANAMENU
RIGHTNANARight-Arrow () key
UPNANAUp-Arrow () key
Table 6-1. Serial Commands (continued)
CommandParameter 
(min/max)Value 
Stored?Description 
						

							External Control
68 PlasmaWall XP Series Installation/Operation Manual
PRELI
MINARY
6.2 
Using Discrete IR 
Codes
The DHD Controller accepts commands in the form of IR signals that conform to the 
Phillips RC5 protocol. Each DHD Controller remote control button has an RC5 control 
code associated with it. 
You can use these codes to program a third-party, “universal” remote control unit to work 
with the DHD Controller. These third-party products usually come with a computer 
software application for this purpose. For more information, consult the documentation 
provided with the remote control unit. 
IR Command ProtocolThe IR control codes have the following characteristics:
 Each code consists of 14 bits:
 Two (2) start bits (always 1);
A toggle bit. This bit is inverted every time a key is released and pressed again. This 
allows the DHD Controller to distinguish between a button that remains down or is 
pressed repeatedly.
 Five (5) address bits. The default address is 17 (binary 10001). To change it, select 
Remote Control from the Service menu and follow the steps given on page 54. 
 Six (6) data bits. 
 The carrier frequency is 36 kHz, with the modulated pulses having a 25% duty cycle. 
 Commands are sent at a maximum rate of 9 Hz.
For example, here is the RC5 control code for the ON button on the DHD Controller 
remote control unit (assuming the default address is used): 
 
➤
With Toggle Bit = 0
Hex3441
Binary11010001000001
With Toggle Bit = 1
Hex3C41
Binary11110001000001
FunctionStart 
BitsToggle 
BitAddressCommand 
						

							External Control
PlasmaWall XP Series Installation/Operation Manual 69 
PREL
IMINARY
Figure 6-1 shows the pulse train for this command (with the toggle bit set to zero). 
Figure 6-1. RC5 Message Format
IR Command ListTable 6-2 lists the RC5 control codes for the DHD Controller. 
S1S2TBA4A3A2A1A0C5C4C3C2C1C0
Start Bits Toggle BitAddress Bits Command Bits
110100 01000001
14 cycles, 24.9 ms
64 cycles,  113.8 ms First Packet Repeated Packet
Data
Word
Encoded
Data
Word
Modulated
Carrier
Zoom In
of Carrier
RC5 Packet
Transmission3t
p
tp
1.78 ms
27.8 µs
Table 6-2. RC5 Control Codes for the DHD Controller 
Remote Control 
Button Name
RC5 Data 
from 
Remote 
Control 
(Note)RC5 Data 
with Toggle 
Bit = 1 
(Note)
Description
(none)0x346E0x3C6ENative aspect ratio
(none)0x34570x3C57SCART video input
16:90x34490x3C4916:9 aspect ratio
4:30x344A0x3C4A4:3 aspect ratio
CINEMA0x346C0x3C6CCinema aspect ratio
COMP0x344E0x3C4EComponent video input
Note: These codes assume that the default address of 17 is used. If you change it to something 
other than 17, you will need to modify these codes accordingly.  
						

							External Control
70 PlasmaWall XP Series Installation/Operation Manual
PRELI
MINARY
CUST 10x34720x3C72Custom 1 memory preset
CUST 20x34730x3C73Custom 2 memory preset
DOWN0x34460x3C46Down-Arrow ()
ENTER0x34440x3C44ENTER
EXIT0x34740x3C74EXIT (RETURN)
HD 10x34510x3C51HD1 video input
HD 20x34520x3C52HD2 video input
HDMI 10x34530x3C53HDMI1 video input
HDMI 20x34540x3C54HDMI2 video input
ISF DAY0x34710x3C71ISF Day memory preset
ISF NIGHT0x34700x3C70ISF Night memory preset
LEFT0x34470x3C47Left-Arrow ()
LET BOX0x344B0x3C4BLetterbox aspect ratio
MENU0x34430x3C43MENU
OFF0x34420x3C42Power off
ON0x34410x3C41Power on
RIGHT0x34480x3C48Right-Arrow ()
SVC0x346D0x3C6DVirtual Cinema aspect ratio
S-VID 10x344F0x3C4FS-Video 1 video input
S-VID 20x34500x3C50S-Video 2 video input
UP0x34450x3C45Up-Arrow ()
VIDEO0x344D0x3C4DComposite video input
V-WIDE0x344C0x3C4CVirtualWide aspect ratio
Table 6-2. RC5 Control Codes for the DHD Controller (continued)
Remote Control 
Button NameRC5 Data 
from 
Remote 
Control 
(Note)RC5 Data 
with Toggle 
Bit = 1 
(Note)Description
Note: These codes assume that the default address of 17 is used. If you change it to something 
other than 17, you will need to modify these codes accordingly.  
						

							PlasmaWall XP Series Installation/Operation Manual 71 
PREL
IMINARY
7.1 
PlasmaWall 
Specifications
Table 7-1 lists the PlasmaWall specifications.  
7. Specifications
Table 7-1. PlasmaWall Specifications 
Native Resolution:1920 x 1080
Screen Size:  XP-50DHD and XP-OPAL50DHD: 
43.50 in. W x 24.50 in. H (1104.9 x 622.3 mm)
50 in. (1270.0 mm) diagonal
XP-65DHD and XP-OPAL65DHD: 
56.50 in. W x 31.80 in. H (1434.0 x 807.0 mm)
65 in. (1646.0 mm) diagonal
XP-103DHD: 
89.30 in. W x 50.30 in. H (2268.2 x 1277.6 mm)
103 in. (2616.2 mm) diagonal
Screen Aspect Ratio:16:9
Available Aspect Ratios:Refer to Table 7-2
DTV Compatibility:480p, 720p, 1080i, 1080p
Contrast Ratio:400:1 (measured at 100 lux); 5,000:1 maximum
Data/Graphics Compatibility:VGA, SVGA, XGA, SXGA, UXGA (compressed)
Horiz. scan frequency = 15 to 110 kHz
Vert. scan frequency = 48 to 120 Hz
Inputs (from DHD Controller):(1) Digital Video (HDMI 1.2A with HDCP) 
(1) RS-232 (9-pin, D-sub male) 
Power Requirements:XP-50DHD / XP-OPAL50DHD / XP-65DHD / 
XP-OPAL65DHD: 100 to 240 VAC, 50/60Hz
XP-103DHD: 200 to 240 VAC, 50/60Hz
Power Consumption:XP-50DHD / XP-OPAL50DHD: 650 W (1.0 W in standby), 
maximum
XP-65DHD / XP-OPAL65DHD: 790 W (1.0 W in standby), 
maximum
XP-103DHD: 1500 W (1.5 W in standby), maximum
Operating Environment:40ºF to 95ºF (5ºC to 35ºC); 
20% to 80% humidity (non-condensing)
Altitude – up to 9,000 feet (2,743m) 
Dimensions:XP-50DHD / XP-OPAL50DHD: See Figure 7-1
XP-65DHD / XP-OPAL65DHD: See Figure 7-2
XP-103DHD: See Figure 7-3
Weight 
(panel only, without stand): XP-50DHD / XP-OPAL50DHD: 93.0 lbs. (42.18 kg) 
XP-65DHD / XP-OPAL65DHD: 163.1 lbs. (73.98 kg) 
XP-103DHD: 485.0 lbs. (220.0 kg) 
Regulatory Approvals:Complies with FCC Part 15 Class B, ICES-003, UL6500 
Ver.2
Specifications are subject to change without notice.  
						

							Specifications
72 PlasmaWall XP Series Installation/Operation Manual
PREL
IMINARY
7.2 
DHD Controller 
Specifications
Table 7-2 lists the DHD Controller specifications.  
Table 7-2. DHD Controller Specifications 
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema, 
Native
Video Standards:NTSC, PAL, SECAM
Inputs: (1) Composite
(2) S-Video
(1) Component/RGBHV/SCART (5 x RCA)
(2) Component/RGBHV (5 x BNC)
(2) HDMI 1.3 with HDCP
Outputs: HDMI 1.3 with HDCP
Control Options:- Discrete infrared remote
- Serial commands via RS-232
- Front-panel controls 
RS-232 Communication 
Parameters: 19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
Trigger Outputs: (3) +12 VDC, each rated at 250 mA and thermal 
fuse-protected 
Bandwidth:150 Mega Samples per Second (MSPS)
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 160 Watts
Operating Environment:41°F to 95°F (5°C to 35°C), 0% to 90% humidity 
(non-condensing) 
Dimensions:Width = 17.50 inches (444.5 mm)
Depth = 11.19 inches (284.1 mm)
Height = 3.75 inches (95.3 mm)
Weight: 13.0 lbs. (5.90 kg)
Regulatory Approvals:Complies with FCC, CE C-Tick
Limited Warranty: Two (2) years parts and labor from the date of delivery to 
the end user.
Specifications are subject to change without notice.  
						

							Specifications
PlasmaWall XP Series Installation/Operation Manual 73 
PREL
IMINARY
7.3 
PlasmaWall 
Dimensions
Figure 7-1, Figure 7-2 and Figure 7-3 show the PlasmaWall dimensions (all dimensions 
are in inches).
 
Figure 7-1. PlasmaWall Model XP-50DHD and XP-OPAL50DHD Dimensions (with 
Optional Table Stand)
30.000 50.42034.000
8.122 4.5663.490
15.5000 8.481 10.23014.387 16.13620.29322.042 22.82830.00048.807
29.574 
						

							Specifications
74 PlasmaWall XP Series Installation/Operation Manual
PREL
IMINARY
 
Figure 7-2. PlasmaWall Model XP-65DHD and XP-OPAL65DHD Dimensions (with 
Optional Table Stand)
0
7.87
12.371.98
2.35
3.69
62.45 54.60 50.10
0
1.63 37.69
1.34
 IR RECEIVER
1.262.49
all around 17.00
0
4.34
8.27 .55
54.19
58.12
61.90
62.45
6.39
4.1910.05
2.07
1.504.506.19 1.73