Home > Runco > Projector > Runco Vx 2ix Projector User Manual

Runco Vx 2ix Projector User Manual

Here you can view all the pages of manual Runco Vx 2ix Projector User Manual. The Runco manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 61

Maintenance and Troubleshooting
Runco VX-2ix Owner’s Operating Manual 49 
5.3 
Troubleshooting Tips
Table 5-1 provides some general guidelines for troubleshooting problems you may 
encounter with the VX-2ix. If you encounter an issue not described here, please contact 
Runco Technical Support. 
Table 5-1. Troubleshooting Chart 
SymptomPossible Cause(s)Solution
The projector does not turn 
on after initial installation. The 
power LED lights red after you 
press the power button.  The VX-2ix is not...

Page 62

Maintenance and Troubleshooting
50 Runco VX-2ix Owner’s Operating Manual
Notes: 

Page 63

Runco VX-2ix Owner’s Operating Manual 51 
6.1 
RS-232 Connection 
and Port Configuration
To interface the VX-2ix with a home theater automation/control system or a PC running 
terminal emulation software, connect it to your control system or PC as shown in 
Figure 
3-10. 
Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop 
bit and no flow control. Set the baud rate to 19200, to match that of the VX-2ix RS-232 
port. 
6.2 
Serial Command 
Syntax
Serial commands to...

Page 64

Serial Communications
52 Runco VX-2ix Owner’s Operating Manual
Input Selection Commands
COMPONENTNAYESSelects the Component input
COMPOSITENAYESSelects the Composite video input 
DVI1NAYESSelects the DVI 1 input 
DVI2NAYESSelects the DVI 2 input 
HD1NA YESSelects the RGB HD 1 input
HD2NA YESSelects the RGB HD 2 input
INPUT?NANAReturns active input
SVIDEO1NAYESSelects the S-Video 1 input
SVIDEO2NAYESSelects the S-Video 2 input
Aspect Ratio Commands
ANAMORPHICNAYESSelects the Anamorphic aspect ratio...

Page 65

Serial Communications
Runco VX-2ix Owner’s Operating Manual 53 
Picture Adjust Commands
BRIGHTNESS-100/100YESSets a value for brightness
BRIGHTNESS?NANAReturns brightness setting value
CHROMADELAY-12/12YESSets a value for input color chroma delay
CHROMADELAY?NANAReturns input color chroma delay setting
COLOR-100/100YESSets a value for color
COLOR?NANAReturns color setting value
CONTRAST-100/100YESSets a value for contrast
CONTRAST?NANAReturns contrast setting value
FILMMODE0/1YESSets Film Mode off (0) or...

Page 66

Serial Communications
54 Runco VX-2ix Owner’s Operating Manual
Input Position Commands
IHEIGHT-100/100YESSets the value for input height
IHEIGHT?NANAReturns input height value
IHPOS-100/100YESSets a value for horizontal input position
IHPOS?NANAReturns input horizontal position value
IVPOS-100/100YESSets a value for vertical input position
IVPOS?NANAReturns input vertical position value
IWIDTH-100/100YESSets the value for input width 
IWIDTH?NANAReturns input horizontal width value
OVERSCAN 0/10YESSets...

Page 67

Serial Communications
Runco VX-2ix Owner’s Operating Manual 55 
Miscellaneous Commands
BKGND-100/100YESSets the background color for letterbox or 
4:3 aspect ratio (-100 = black; 100 = white)
BKGND?NANAReturns background setting value
DATE?NANAReturns product manufacture date
HDINPUTRESNAYESSets YPbPr input resolution and refresh 
rate for HD1/HD2, as follows:
0 = 480i
1 = 480p
2 = 576i
3 = 576p
4 = 720p / 60 Hz
5 = 1080i / 60 Hz
6 = 720p / 50 Hz
7 = 1080i / 25 Hz
Any other value = Auto
HWVER?NANAReturns...

Page 68

Serial Communications
56 Runco VX-2ix Owner’s Operating Manual
Notes: 

Page 69

Runco VX-2ix Owner’s Operating Manual 57 
7.1 
VX-2ix Specifications
Table 7-1 lists the VX-2ix specifications.  
7. Specifications
Table 7-1. VX-2ix Specifications 
Projector Type:Digital Light Processing (DLP), 3-chip, 16:9 DMD
Native Resolution:1280 x 720 (16:9)
Aspect Ratios:4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema, 
VirtualWide 2.35
Video Standards:NTSC, PAL
DTV Compatibility:480p, 720p, 1080i
THX recommends the use of 720p source material for optimal 
performance with this product....

Page 70

Specifications
58 Runco VX-2ix Owner’s Operating Manual
Brightness and Contrast: Cinema Standards Measurement System (CSMS) 
Specifications
- Brightness: 52.1 foot-Lamberts (fL)
- Contrast Ratio: 271:1
These measurements are taken from the projector in a controlled, 
home theater environment. All measurements are made to 
ANSI/NAPM IT7.228-1997 specifications using the Photo Research 
PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, 
Video Essentials test DVD and a 1.3 gain, 72-inch wide...
Start reading Runco Vx 2ix Projector User Manual

Related Manuals for Runco Vx 2ix Projector User Manual

All Runco manuals